Top Gold Plated Pcb

Gikfun Mini Solderless Breadboard 400 Tie-points + 2xPCB Solder-able Breadboard + 2.54mm 10Pin Jumper Wires Male to Male DIY Kit for Arduino EK8473

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place..
  • 1 x Mini Solderless Breadboard 400 points, Size:8.3cm x 5.5cm..
  • 2 x PCB Solder-able Breadboard, Gold plated finish prevents oxidation, High quality Gold finish for easy soldering. All holes are through-plated for strength..
  • 10Pin 2.54mm Male to Male Jumper Wires Male to Male, 20CM..
Check Stock

SinLoon M.2(NGFF) Key M NVMe SSD Extension Cable Extender PCIe3.0 x4 Full Speed 12.6inch SSD Extension Cable (32cm)

  • 【M.2 NVMe Solid State Drive Extension Cable 】Allows you to extend M.2 NVMe slot outside of the laptop..
  • 【Maximum Transmission】PCIe3.0 x4 full speed.The maximum transmission rate is 32Gbps (Max.)..
  • 【Product advantages】If your Chassis is too small, the SSD will soar to 75°C when playing games. You can use this M.2 NVMe SSD extension cable to place it next to the fan and keep it at about 30°C offers you smoother experience..
  • 【Durable and strong】SSD Extension Cable uses high-quality materials, PCB workmanship precision, gold finger gold content is sufficient, gold-plated foot has good electrical conductivity, which can reduce the blue screen of the crash caused by the increase of oxidation and rust resistance. The signal transmission is stable at full speed and there is no compatibility problem..
  • 【Features】M.2 NVME SSD extension cable is fastened with screws and hex nuts. The product is strong and reliable, resistant to pulling, anti-interference, and will not be broken. The nail problem. The wire can be bent and folded without affecting the use. PCB long design to make the board easier to install, reducing the chance of damage..
Check Stock

Harby Centauri Overdrive and Boost Guitar Effects Pedal

  • A modernized, yet highly accurate circuit tribute of the legendary Klon Centaur overdrive pedal.
Check Stock

RUNJRX Keyboard Stabilizers Screw-in Stabilizers Shaft Mechanical Keyboard PCB Mount Transparen Screw-in Stabilizers 7U 6.25U 2U (60/87, Whiteness)

  • APPEARANCEThe translucent case makes your keyboard more beautiful, the gold-plated balance bar and gold-plated screws increase the oxidation resistance and extend the use time..
  • REASONABLE MATCHWe provide players with a screwdriver, easy to assemble and disassemble, also includes eva foam, according to their needs arbitrary cut, put into the keycap behind, effective noise mitigation, easy to install..
  • PACKAGE INCLUDINGScrewdriver x 1, stabilizer 2U x 4, stabilizer 6.25U x 1 , 7U balance bar x 1, screw x 10, high density eva custom foam x 1..
  • Hand FeelNo stuck keycaps, smooth feel, comfortable rebound strength..
  • AttentionThe RUNJRX Keyboard Stabilizer is a screw-in stabilizer for custom keyboard PCB..
Check Stock

PCB Mount Stabilizers,Velocifire PCB Screw-in Stabilizers Mechanical Keyboard Stabilizers PC Material Satellite Switch 7u 6.25u 2u for Mechanical Keyboard(Smokey Grey)

  • The set contains a 7U wire, a 6.5U stabilizer, four 2U stabilizers, ten washers, and ten gold-plated screws, which are matched with each other, making it more convenient to use..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Designed for MX-compatible PCB Boards, the Transparent Stabilizer pack helps bring out the color in your LED-backlit keyboard..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set..
  • Polymer Nylon PA Outer Casing. Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
Check Stock

PCB Mount Stabilizers,Velocifire Keyboard Stabilizers PCB Mount Screw-in Stabilizer Mechanical Keyboard Gold Plated Stabilizer 7u 6.25u 2u for DIY Mechanical Keyboard(Transparent)

  • The set contains a 7U wire, a 6.5U stabilizer, four 2U stabilizers, ten washers, and ten gold-plated screws, which are matched with each other, making it more convenient to use..
  • Designed for MX-compatible PCB Boards, the Transparent Stabilizer pack helps bring out the color in your LED-backlit keyboard..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set..
  • Polymer Nylon PA Outer Casing. Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
Check Stock

Musical Paradise MP-301 MK3 Mini Tube Amplifier with Headphone Output Deluxe Version

  • Single Ended Class A 7W/Channel Tube Amplifier.
  • Supports 6L6 (6P3P), KT66, 5881, EL34, KT77, KT88 and 6550 (Plug & Play).
Check Stock

Treedix Compatible with Raspberry PI PICO Breakout Board Flexible PCB Shield Board with Pin Header

  • This breakthrough board is specially made for Raspberry Pi Pico, with additional pin headers, which are fully compatible with the board.
  • The pin header and the breakthrough board are not welded, just insert pico after the welding is successful.
  • The breakthrough board is gold-plated on both sides and holes are plated, and the material of the PCB board is excellent.
  • The breakthrough board is equipped with Raspberry Pi pico, which is convenient for users to develop and integrate flexibly.
  • Note: The package does not include Raspberry Pi pico. This product needs to be assembled and welded by itself.
Check Stock

ZugGear V2 PCB Mount Screw-in Stabilizers Translucent Smokey Gold Plated 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Stabilizers (DUROCK V2 Smokey 60/87 Kit)

  • DUROCK V2 PCB Mount Stabilizers are with NEW Non-Stripping Wire Design, fits for MX-compatible PCBs..
  • The V2 Outer Casing wire holding clasp made to prevent stripping of the wires, different from regular Cherry PCB mount stabilizers and others..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set. ( Washers, 6.25u and 7u Wire included ).
Check Stock

ZugGear V1 Translucent Smokey Gold Plated PCB Screw-in Stabilizers 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Screw Stabilizers DUROCK V1 Smokey 60/87 Keyboard Set

  • 1. DUROCK PCB Mount Stabilizers are designed for MX-compatible PCBs..
  • 2. Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • 3. The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
  • 4. Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • 5. Pre-clipped Insert method, no need to clip the feet. Fit for 60 Keyboard Set,87 Keyboard Set and 104 Keyboard Set. ( Both 6.25u and 7u Wire....
Check Stock

Homyl Transparent Gold Plated PCB Screw-in Stabilizers 2U 6.25U Keycap Stabilizers for MX Mechanical Keyboard Cherry 1 Set Replacement - Pink 1 6.25u 7 2U

  • * Pre-clipped Insert method, no need to clip the feet. Fit for 104/108 Keyboard Set. ( 1pc 6.25u 7pcs 2U Wire included ) / Fit for 61 Keyboard Set and 87 Keyboard Set. ( 1pc 6.25u and 4pcs 2U ).
  • * PCB Screw-in Mount Stabilizers are designed for MX-compatible PCBs..
  • * Polymer Nylon outer Casing :Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • * The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
  • * Transparent housings and the Golden Wires set gives your board a clear and golden edge..
Check Stock

Gold-Plated PCB Screw-in Stabilizers 2u 6.25u 7uKeyboard Stabilizers with Nylon Washers Golden Wire+Purple 60/87 Keyboard

  • PCB Screw-in Stabilizers Mechanical Keyboard Satellite Shaft Screw Stabilizers, with 6.25u and 8u wire..
  • Keyboard screw-in stabilizers have Seven kinds of matching, Golden wire + transparent white, Golden wire + transparent black, Black wire + transparent black Golden wire+ PinkGolden wire+RedGolden wire+Green,Golden wire+Purple.Multiple combinations give you more choices.
  • PCB screen-in stabilizers adopts CNC copper nut in mold injection molding process, the nut in mold molding, more firm, not offset coordinates.
  • High quality nylon transparent material is used to make your LED backlight keyboard more transparent and smooth. Gold plated stainless steel wire and screw, avoid long-term use of oxidation corrosion.
  • the customized packaging box is used to better protect the steel wire from deformation and bending. With nylon washer.
Check Stock