Top Gpu Instances

inRobert DIY Two Ball Bearing Video Card Cooling Fan for Zotac GTX 1060 Mini

  • Must Read Before Order: Please carefully check the photo , and measure the size of your own GPU fan , and the mount hole pitch of your video card fan.....
  • Two Ball Bearing fan can work longer life and work quietly.
  • Suitable for Zotac GTX 1060 Mini 3GB GPU.
  • Please keep the screws from your own GPU , the fan not come with any screws.
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • ...chine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and downloa....
Check Stock

CableMod Vertical PCI-e Bracket Black HDMI + DisplayPort

  • Heavy duty bracket to vertically show off GPU and water cooler. Compatible with most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX....
  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800 / Chipset -....
  • Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please....
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals....
Check Stock

LINKUP - 30cm PSU PC Power Extension Cable Metallic Sleeved Silicone Coated Soft & Flexible to Route Custom Mod GPU & CPU w/Comb Kit┃1x 24P (20+4)┃2X 8P (4+4) CPU┃2X 8P (6+2) GPU┃300mm - Silver

  • 【Get Wired】High-quality, super soft, and routable modular 18AWG multi-color PSU cable extensions with durable silicone jacket cables for refined professional builds.
  • 【2 x CPU & 2 x GPU】2 x 4+4-Pin CPU power cables and 2 x 6+2-Pin GPU power cables bundled in one package. Suitable for new CPU & GPU. Also includes 24-Pin motherboard power cable.
  • 【Vivid】Mod your build with 3 unique color options in 30cm and 50cm.
  • 【Robust and Adaptable】All cables are manufactured with thick 18AWG UL 1015 Tinned Copper wires and come in a high-density flexible metallic sleeve allowing for an adaptable temperament. Comes with several cable combs to cleanly route and organize.
  • 【LINKUP Cares!】Backed by a LINKUP Limited 1-Year Warranty and complimentary premium online support. **NOTE: These cables do not arrive pre-curved. The photos listed are a representation of how the cables can be trained. With the braided design, these cables can be easily curved, as demonstrated in the listing photo.
  • 【Stiff Single 8-Pin GPU: B088P8QKRB】 【Stiff Single 8-Pin (4+4) CPU: B085YFQW6M】 【Stiff Single 4-Pin CPU: B08CFTSQ34】 【Stiff 2GPU+1CPU Set: B07JBN1RY6】 【Stiff 2GPU+2CPU Set: B07T8C98ZQ】 【Stiff 3GPU+2CPU Set: B088P7CNT5】 【Soft Cable Version: B08....
Check Stock

SUOHUI GPU Mining Rig Complete System for Ethereum Classic ETC, ETH, RVN, Flux, Ergo Crypto Miner with 8 GPU Mining Motherboard,PSU, RAM,SSD, Stackable Mining Frame Machine(Without GPUs)

  • ...ade of high-quality material, reinforcing the mobo with14 screws to protect it from being overshaped. The open-air frame ensures that the graphics card is not limited in length. You can easily stack multiple SUOHUI mining rigs at will without covering too much space..
  • 【8 GPU Mining Motherboard】: Our mining rig has installed a 8 GPU slots mining motherboard with SSD,RAM,CPU. 65mm spacing provides enough space between GPUs, suitable for AMD/NVIDIA GPUs. Note: The width of GPUs should not exceed 65mm..
  • 【1800W Stable Mining Power Supply】:This mining power supply uses 4U PSU rated output 1800W 12V full-voltage, can work under (110-220v）.10 long-line cables with 16x8 (6+2) pins and 6x6 pins, which can powers the mobo and GPU directly. Effectively improve conversion efficiency and reduce power loss..
  • 【4*4500rpm Silent Cooling Fans】4*4500rpm GPU cooling fans, professional silent design with adjustable fan speed controller, fully accelerating airflow to achieve the ultimate cooling effect. Let you easily enjoy the fun of mining at home..
  • 【Professional GPU Mining Rig】: SUOH....
Check Stock

LINKUP - 50cm PSU PC Power Extension Cable Metallic Sleeved Silicone Coated Soft & Flexible to Route Custom Mod GPU & CPU w/Comb Kit┃1x 24P (20+4)┃2X 8P (4+4) CPU┃2X 8P (6+2) GPU┃500mm - Gold

  • 【Get Wired】High-quality, super soft, and routable modular 18AWG multi-color PSU cable extensions with durable silicone jacket cables for refined professional builds.
  • 【2 x CPU & 2 x GPU】2 x 4+4-Pin CPU power cables and 2 x 6+2-Pin GPU power cables bundled in one package. Suitable for new CPU & GPU. Also includes 24-Pin motherboard power cable.
  • 【Vivid】Mod your build with 3 unique color options in 30cm and 50cm.
  • 【Robust and Adaptable】All cables are manufactured with thick 18AWG UL 1015 Tinned Copper wires and come in a high-density flexible metallic sleeve allowing for an adaptable temperament. Comes with several cable combs to cleanly route and organize.
  • 【LINKUP Cares!】Backed by a LINKUP Limited 1-Year Warranty and complimentary premium online support. **NOTE: These cables do not arrive pre-curved. The photos listed are a representation of how the cables can be trained. With the braided design, these cables can be easily curved, as demonstrated in the listing photo.
  • 【Stiff Single 8-Pin GPU: B088P8QKRB】 【Stiff Single 8-Pin (4+4) CPU: B085YFQW6M....
Check Stock

ASUS ROG-STRIX-RX580-O8G-GAMINGOC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card

  • 1380 MHz boost clock (OC Mode) for 7% performance improvement over reference.
  • Patented Wing-Blade for maximum airflow and longer fan lifespan.
  • ASUS Aura Sync RGB lighting features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of AURA Sync enabled products. Stream Processors - 2304.Engine Clock: 1360 MHz (Gaming Mode).
  • Industry-first MaxContact technology features an enhanced copper surface to allow for twice the GPU contact as traditional thermal solutions. Software : ASUS GPU Tweak II & Driver. Aura(Graphics Card) Utility.
  • Easily monitor and control your GPU's performance and cooling with the intuitive GPU Tweak II interface and Fan Connect II for GPU and CPU temperature sensing.
  • Auto-Extreme manufacturing technology delivers premium quality and reliability with aerospace-grade Super Alloy Power II components. OpenGL 4.5.
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 55mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. Small size, more suitable for mining factories. We can provide 24 hours technical support and no reason to return the product..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Six cooling fans, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 6 , 6 PIN cable to (6 + 2) Pin * 8pcs（male to male）, screws ​​package. There are two power connection methods: the built-in power supply requires you to purchase additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please ref....
Check Stock

8 GPU Mining Rig, Complete Ethereum Crypto Miner Mining Machine System Case with 4U 2000-3000W Power Supply ＆ 8 Cooling Fans, ETHW/ETC Miner Frame with Motherboard/CPU/Windows System (Without GPU)

  • ... customer support. If you encounter any problems or the goods you receive are damaged, please feel free to contact us and we will solve your problems in time. If you are not satisfied for any reason you can return the mining rig case for a full refund. We can offer a 30-day money-back guarantee..
  • √【Ultra-quiet 8 GPU Mining Rig】It is designed for cryptocurrency mining.The mining machine system comes with 2000-3000W (The power is 2000W when the voltage is 110V, and the power is 3000W when the voltage is 220V.) professional Low Decibel mining machine power supply, suitable for home use. Equipped with multiple power protections to provide your system with a more reliable and stable output voltage, providing more consistent power delivery..
  • √【8 GPU Slots】The mining machine system case comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. Enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency. Allowing you to enjoy mining without any adjustment, with super high work efficiency..
  • √【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS quiet cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to ....
Check Stock

B BYKSKI RBW LED GPU VGA Water Cooling Block for NVIDIA ASUS MSI EVGA Galax GIGABYTE Zotac Colorful PNY MAXSUN Palit RTX 2080Ti/2080 (RTX2070 Block)

  • The GPU water block compatible with all reference design GeForce RTX 2070 based graphics cards, more details pls refer to the description..
  • AURA effect RGB LED lights built-in, the remote control, driver and back plate are included..
  • The water block directly cools the GPU, VRAM and the VRM Made of nickel-plated electrolytic copper and acrylic material..
  • Compatible 5V 3PIN GND Header to connect motherboard to AURA SYNC etc. Wth 1pcs Backplate to fix block better..
  • As the description box requires limited numbers, in fact, this GPU BLOCK is compatible with all public graphics cards, so the GPU BLOCK we send to the buyer is 2080TI GPU Block. If you have any questions, please contact us before buying.
Check Stock

Bykski GPU Liquid Cooler Copper Waterblock G1/4 Full Cover PC Water Cooling Watercooling Block for Graphics Card EVGA Nvidia GeForce RTX 2080 Ti Kingpin 5V 3PIN G1/4 Threads RGB Remote Control

  • This GPU water block is not an universal waterblock. It only works with graphics card EVGA Nvidia GeForce RTX 2080 Ti KINGPIN. The GPU watercooling....
  • AURA effect 5V 3pin RGB LED lights color changeable assembled GPU watercooling block, the remote control is included..
  • 2pcs G1/4" nickel plated brass compression fittings for 14mm OD rigid or hard tubings are included..
  • High Performance Copper Base. 5v 3-pin connector. Astonishing VGA GPU liquid cooling block for PC game players..
  • Please ignore the long estimated delivery time provided by amazon. Actually, this GPU liquid cooler will post by express shipping, and it will take 7....
Check Stock

Sonnet eGPU Breakaway Box 750ex - External GPU Chassis

  • Boosts Graphics Performance – Connects a high-performance GPU card to your computer with Thunderbolt 3 ports. Mac & Windows Compatible. **M1 Macs are NOT compatible with GPUs..
  • Cuts Application Task Times – Enables GPU acceleration to significantly improve editing, rendering, color grading, animation, and special effects performance..
  • 750W Power Supply – Support the power requirements of the latest compatible GPU cards.
  • future-proof design handles higher power requirements of cards to come..
  • Supports Many of the Latest GPU Cards – Includes AMD Radeon VII, RX, RX Vega, Pro W and Pro WX models.
  • and NVIDIA GeForce RTX series, TITAN, and Quadro models..
  • 750ex Model: Additional Connectivity Adds four 5Gb/s USB Type A ports to connect peripherals, plus an RJ45 Gigabit Ethernet port for a wired network connectivity..
Check Stock