Top Gpu Mining Motherboard 2

MLLIQUEA 8 GPU Mining Rig Frame, 70mm Mining Machine System & Platform, Barebone Motherboard for ETH with 4 Cooling Fans, Miner Frame Case with SSD, RAM (Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 70mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. (Please read the NOTE in the Product Description carefully before purchasing!)Two kinds of motherboards are shipped randomly..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 4 , 6 PIN cable to (6 + 2) Pin * 8pcs, screws ​​package. Compatible with Win10 /iOS, but you'll need to install the system yourself. (Graphics cards longer than 320mm cannot be used.).
  • Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency. Note: The hard disk i....
Check Stock

8 GPU Mining Rig Frame Fold Case, Ethereum GPU Mining Rig Complete Crypto Miner Including 8GB Ram/Motherboard/SSD/CPU/ Windows System/Hiveos Mining Machine(Excluding GPU PSU)

  • 【Mining rig Including】: B85 motherboard,CPU,128GB SSD, 8G DDR 3, 3000 rpm cooling fan * 5. win10 system (not activated) and HIVEOS installed USB disk (NOTE: GPU CARDS AND PSU NOT INCLUDING)..
  • 【8 GPU Mining Motherboard】: Intel-B85 mining motherboard,65MM slots' distance give a good heat dissipation when GPU cards installed.Usually suitable GPU type(1660/2060/3060ti/3070/3080/3090/A2000/A4000, 5600/5700/6600/580 etc).
  • 【 Complete Crypto Mining Box 】: High-quality steel material and Fold design make it is sturdy, durable and convenience. Full protection for GPU and electronice devices..
  • 【Heat dissipation and noise control】 :5 air out fans work at the same time, high speed air flow to achieve a well heat dissipation and do not make big noise..
  • 【NOTE】: GPU AND PSU DOES NOT INCLUDING. WE HAD SOLD THE MATCHED PSU AT OUR STORE.THE BOX IS SENT BY PARTS, YOU NEED BUILD UP IT BY YOUR OWN.VERY CONVENIENT TO ASSEMBLE..
Check Stock

1/4 Classifier Sifting Pan Gold Panning Fits 5 Gallon Bucket Mesh Screen

  • OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
  • B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
  • Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
  • B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
  • GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....
Check Stock

SUOHUI Complete GPU Mining Rig Open-air Crypto Miner for Ethereum Mining Prebuilt 8 Slots Mining Motherboard,1800W PSU,4 Cooling Fans, 8GB RAM,128GB SSD, Win10 OS(Excluding GPU/1 Layer Miner)…

  • 【Professionally Installed and Test 】 This stackable miner is sturdy and durable with high-quality steel.Unique bottom plate not only for dust-proof and moisture-proof but also accelerate air convection and enhance heat dissipation. Fully protection for your GPUs and mining hardware..
  • 【8 GPU Mining Motherboard 】 Professional mining motherboard, designed for cryptocurrency mining. 8 NVIDIA or AMD graphics cards can be mixed use without additional GPU risers. 65mm spacing slot perfectly fits most GPUs and achieves high heat dissipation. Ensure better performance of GPU mining..
  • 【1800W Full Voltage Power Supply】 4U industrial control power supply, designed for GPU mining. The stable output of 1800W high power and conversion up to 90%. Available at 110V and 220V. 10 long-line power connection cables directly connect to the motherboard and GPUs. Reduce power loss and extend service life..
  • 【Ultra-quiet Controllable Cooling Fans】The mining machine has installed 4*4500 RPM silent GPU cooling fans and a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. The professional mute design lets you easily enjoy the fun of mining at home..
  • 【Warmly Notes】: After receiving the miner, you need to conne....
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • ... volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use.Compatible with Win10 /OS, but you'll need to install the system yourself..
  • 【Kindly Note】The new version of mining case has 5 USB ports, enough for daily work. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating. The miner machine system doesn't come with GPU. Our products have undergone strict quality inspection before leaving the factory. If you encounter any problems during use, please feel free to contact us..
Check Stock

Mining Rig Frame 8 GPU 70mm Slots with 8 Fans Crypto Ethereum Miner Case with Barebone Motherboard for ETH/ZEC Cryptocurrency System Machine with SSD/RAM Without GPU/PSU

  • 【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM.
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs....
  • 【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports,....
  • 【Mining rig case】The rig doesn't come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling....
Check Stock

SOONTECH Complete Mining Rig System for Ethereum Coin with Windows 10 Mining Motherboard Including CPU,SSD RAM,PSU Open-Pit Mining Machine,Frame Mining Machine EXCLUDING GPU/1 Layer Mining RIG

  • OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
  • B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
  • Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
  • B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
  • GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....
Check Stock

FebSmart GPU Riser for Ethereum Mining Rigs, PCIE Risers for ETH Mining Rigs, GPU Extension Cable, PCIE Extension Cable, PCIE X1 to PCIE X16 Riser, VER006C PCIE Riser, VER006C GPU Riser (Black-6PCS)

  • 1. This FebSmart VER006C is a PCIE X1 to PCIE X16 GPU riser. The GPU riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16 slot. The extended PCIE X16 slot will provide safe and reliable connection with GPUs. Light up more GPUs in Ethereum Mining rigs or other GPU Mining Rigs for currency mining..
  • 2. This GPU riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more PCIE X16 GPUs and cool down GPUs tamperature. Added fixed buckle on the extended PCIE X16 slot, will ensure GPUs always online, always works in high performance..
  • 3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on GPU Riser, will make sure PCIE data signal get stable and reliable power supply. Built in electric safty fuse, will keep PCIE data signal away from overvoltage, overcurrent. Communicate with Ethereum mining pool instantly, Ensure Ethereum Miner Rigs get more Ethereum Hash Rate..
  • 4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin SATA to 6Pin molex power cable, allow users easy pick-up basic PCIE data signal power supply from GPU Miner Rigs PSU..
Check Stock

Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)

  • Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
  • Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Including； Windows is not atctivated.) If you have any questions or the goods received are damaged, please feel free to contact us..
Check Stock

SENKAUTO Mining Rig Case 8 Ports GPU Mining Frame Case Mining Motherboard 8 Cooling Fans Supported(4 Preinstalled) Mining Machine System with 4GB RMA, CPU (Without GPU/PSU) (Black)

  • Support 8pcs GPUs: The mining rig case support 8 GPUs. Support ATX motherboard, built-in, external dual PSU hosting, PSU mounting, hard drive. 8 GPUs can be installed at the same time, which greatly improve the performance of the BTC/ETH/ETC mining machine case..
  • Generous Space between GPUs: The Gap between GPU ports is about 65mm, it can ensure high performance, low power consumption for mining..
  • Support 8 Cooling Fans: The mining rig case support 8 cooling fans and preinstalled with 4* 2500rpm cooling fan. 2* fan speed controller, you could adjust the fan speed according to your need. Great heat dissipation is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Support ATX/1U/2U Power Supply: The mining rig frame made of highest quality steel, with the finest craftmanship, which is easy to install and has a sturdy structure. With a larger room for power supply, you can install standard ATX PSU directly without modifications. Keeps the machine perfectly organized while it holds the least amount of heat possible..
  • Mining rig case package: Including: motherboard, CPU, power switch line, 4G RAM, 2500rpm cooling fan * 4, fan speed controller*2, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't in....
Check Stock

IIAzimps PCI-E Riser Card 010S 8 Solid Capacitors GPU Risers Adapter Card PCI-Express 1X to 16X Riser Card for Bitcoin Ethereum Mining BTC ETH Miner Rig (3 Pcs Pack)

  • Upgraded Version: The 010S PCI-E risers card is the newer upgraded version of the GPU risers 009S, expand the motherboard PCIE 1X to PCIE 16X slot, use gold plated contacts to ensure flawless connectivity and long life. Mainly designed for Bitcoin Ethereum Crypto Mining rigs and other GPU mining equipment..
  • More Stable and Secure: The graphics card power supply adopts 8 solid capacitors to ensure the graphics card mining stably and secure..
  • Multi-interface Design: 4PIN+6PIN interface design, With SATA 15pin Male to 4pin/6pin power cable, makes the graphics card power independent of the motherboard to reduce the burden on the motherboard when connecting multiple graphics cards..
  • Thoughtful Design: The PCI-E USB 3.0 cable uses multi-layer shielded wire, which can be connected to a maximum of 3M without attenuating the signal. 6 marquee LED lights display working status. The graphics card slot is metal shielded to prevent interference and with a fastening buckle, which provide a firmly connect..
  • Wide Compatibility: This GPU riser kit is compatible with 1x, 4x, 8x, 16x PCI-E slot of th....
Check Stock