Top Gpu Riser Cable Pcie 0

Lian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 4.0 / White -O11DMINI-1W-4

  • Vertical Graphics card holder for O11Dynamic XL with PCI-E 3.0 Riser Cable.
  • "NOT" Compatible with PCI-E 4.0​​ VGA Card.
  • 5 slots offer builders more installation options.
  • Included PCI-E Riser Cable , allows you to mount a PCI-E 16X Card..
  • In the condition of using the included riser cable (PCIE3.0) with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow steps to set up your BIOS to make it compatible..
Check Stock

AsiaHorse New PCIE 3.0 16x High Speed Flexible Extender Riser Cable Card Extension Port Adapter 200mm(90 Degree Angle Black)

  • FULL-SPEED PCI-E 3.0 x16 128Gbp/s BANDWIDTH: AsiaHorse pcie 3.0 riser cable will deliver all the performance of PCIe 3.0 to your GPU, supporting PCI 3.0/2.0/1.0 applications. Doesn’t Support PCIE4.0..
  • EMI SHIELDED DESIGN: The pcie riser cable utilizes the latest materials for EMI shielding, allowing each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance..
  • EXTENDED AND ANGLE: With 25cm of cable length and a 180° female PCIe connector, making this pcie extender minimizes cable stress and easily install your GPU in compatible cases..
  • COMPATIBILITY: Flexible and extended PCI-Express slot with 1x/4x/8x/16x compatibility. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3080,RTX3090, RX570, RX580, GTX680, GTX670 GTX760 etc..
  • NOTICE: The transmission speed depends on the motherboard and graphics card speed is consistent. For example: PCI-E graphics card is 2.0, the motherboard PCI-E 16X is 3.0, then the actual transmission speed is 2.0, and vice versa..
Check Stock

PCIe Riser Powered Adapter Card 1X to 16X, PCI-E GPU Risers 8 Capacitors for Bitcoin Litecoin ETH Coin Mining with Led Graphics Extension +60cmUSB 3.0 Cable and 6-Pin SATA Power Cable (VER009s-6Pack)

  • 【Pcie Riser x16 to x1】 Our high performance 009s -plus riser added fixed buckle on the PCI Express X16 slot ensure stable GPU connection. What's more, it can extend the mother board PCIE X1 slot to PCIE X16 slot and will provide more safer and reliable connectivity with more PCIE X16 graphic cards..
  • 【Strong Stability for You】 The 009s gpu riser come with 24 inches USB 3.0 pcie extension cable mining.The PCI-E connector uses multi-layer shielded wire, which can be connected up to 300cm without signal attenuation. Equipped 15Pin SATA to Molex 6Pin power cable that can provide adequate current for Ethereum Mining rigs and GPU Mining rigs..
  • 【8 Capacitors, More Safer】This high quality pcie riser splitter mining is equipped with 8 upgraded FP solid capacitors which make the graphics card power supply more safer and stable. It is excellent choice for mining rigs..
  • 【Support System】: Compatible with all WINDOWS systems, LINUX, MAC.--Plug and play, no driver needed to install. (Bonus: 6*pcie riser adapter cards, 6*PCI-E 1x Golden Fingers , 6*60cm USB 3.0 cables, 6*6Pin to15Pin SATA power cables.）.
  • 【Reliable Support】 Buy with 90 days warranty. PCI-Express GPU riser kits have been tested for functionality and durability by the third parties bef....
Check Stock

FebSmart PCIE Riser for Ethereum Mining Rigs, GPU Risers for ETH Mining Rigs, PCIE Extension Cable, GPU Extension Cable, PCIE X1 to PCIE X16 Riser, VER006C GPU Riser, VER006C PCIE Riser (Blue-2PCS)

  • 1. This FebSmart VER006C is a PCIE X1 to PCIE X16 riser. The PCIE riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16 slot. The extended PCIE X16 slot will provide safe and reliable connection with GPUs. Light up more GPUs in Ethereum Mining rigs or other GPU Mining Rigs for currency mining..
  • 2. This PCIE riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more PCIE X16 GPUs and cool down GPUs tamperature. Added fixed buckle on the extended PCIE X16 slot, will ensure GPUs always online, always works in high performance..
  • 3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on PCIE Riser, will make sure PCIE data signal get stable and reliable power supply. Built in electric safty fuse, will keep PCIE data signal away from overvoltage, overcurrent. Communicate with Ethereum mining pool instantly, Ensure Ethereum Miner Rigs get more Ethereum Hash Rate..
  • 4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin SATA to 6Pin molex power cable, allow users easy pick-up basic PCIE data signal power supply from GPU Miner Rigs PSU..
Check Stock

Lian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 3.0 / White -O11DMINI-1W-3

  • Vertical GPU mount accessory for the O11D MINI.
  • NOT Compatible with RTX 3080/3090 and PCIE 4.0.
  • Bracket Kit Dimension: (D)180mm X (W)191.5mm X (H)272.5mm.
Check Stock

PCIE Riser Cable VER006C,GPU Risers for Mining Rigs,GPU Extension Cable,GPU Crypto Currency Mining Cable with 6Pin-SATA Power Cable and 23.6in Extension Cable,Extend PCIE X1 to PCIE X16(PCE-VER006C)

  • 1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
  • 2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure GPUs works in high performance all the time..
  • 3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
  • 4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over voltage and over heat..
  • 5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales will let user easy to place GPUs..
Check Stock

Dracaena 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status Riser Adapter + 60cm USB 3.0 Cable (GPU Ethereum Mining)

  • Upgraded Version: The Dracaena PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • Stable solution: The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes it easy to remove and replace the graphics card without it falling out..
  • Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • Power Supply Options: While other PCIE has only 1 option for power connector which is 6 pin power connector. Dracaena Riser provides 3 different options which are 6pin, Molex and SATA.
  • 3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave.
Check Stock

Newest VER009S PCIE Riser Express Cable 1X to 16X (Dual-6pin / MOLEX) with Led Graphics Extension Ethereum ETH Mining Powered PCI-E Riser Adapter Card, with 24inches USB 3.0 Cable, 6 Pack

  • High-performance PCI-E Riser Board: This PCIE riser can expand the motherboard PCI-E X1 slot to the PCI-E X16 slot. It will provide safe and reliable connections with more PCI-E X16 graphics cards. It will be mainly used to build small open-air equipment or a large rack-mounted miner..
  • The Safety and Stability You Want: This GPU riser is equipped with 4 upgraded FP solid capacitors, which are a reliable source of safe and stable power. They can perfectly prevent overheating and overvoltage and provide reliable protection for power transmission..
  • Yes, It’s of Course VER 009S: 009S version of the riser mining kit is the latest and most advanced solution for setting up GPU mining equipment. Suitable for all Window systems, LINUX and MAC..
  • More Choices: This PCIE riser 1x 16x have 4PIN and two graphics card 6PIN interfaces (two 6PIN interfaces have different directions) are optional power supplies. They can provide an independent power supply of the graphics card-Enhance power supply performance, which solve the problem of insufficient power supply and easy burnout.
  • and reduces the burden on the motherboard when using more graphics cards..
  • Upgrade Design: This mining PCIE riser has 24inches (60cm) USB 3.0 cable, the cable with shielded net inside is more s....
Check Stock

N N.ORANIE 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card and 60cm USB 3.0 Cable

  • 【PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X】 The N N.ORANIE PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • 【STABLE and SAFE】Features 4 high quality black solid capacitors to make the power deliver from graphics card more secure and stable. Build in electric circuit protector keep device away from over current, over heat and over voltage. WARNNING: If the PCIE X1 Connector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots..
  • 【3 POWER SUPPLY METHODS】3 power supply methods are used: SATA power interface, 6Pin power interface, and 4-pin interface power supply.Multiple power supply methods solve the problem of power mismatch. Reduces the power supply burden on the motherboard and can be freely selected according to the actual usage environment.(Please reserve 10W power supply for riser when configuring power supply).
  • 【REDUCE MOTHERBOARD BURDEN】6-PIN PCI-E power to 15-PIN SATA power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compat....
Check Stock

CableMod Vertical PCI-e Bracket Black HDMI + DisplayPort

  • Heavy duty bracket to vertically show off GPU and water cooler. Compatible with most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX....
  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800 / Chipset -....
  • Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please....
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals....
Check Stock

PCIE Riser Card 8 Capacitors,GPU Extender Riser Card for Bitcoin Litecoin ETH Ethereum Mining,with 60 cm USB 3.0 Extension Cable & 6PIN SATA Power Cable (V009s-PLUS,6 Pack)

  • ✅【PCIE Riser Card】The motherboard PCIE X1 slot can be expanded into a PCIE X16 slot, which will provide a safe and reliable connection for more graphics cards..
  • ✅【8 solid capacitors】The PCIE riser adopts 8 solid capacitors to make the power supply of the graphics card more secure and stable. Equipped with a 15Pin SATA to Molex 6Pin power cable for enhanced power supply..
  • ✅【Reduce the burden】The GPU riser makes the power supply of the graphics card independent of the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected..
  • ✅【Strong stability】The PCIE riser uses a 60cm USB 3.0 cable, which can be easily placed and wired, with multi-layer shielded wire, the signal will not be weakened within 3 meters, and mining is more stable..
  • ✅【Support system】Compatible with MAC, LINUX and WINDOWS systems, no need to install drivers, plug and play. If you have any questions about the product, please contact us..
Check Stock

LINKUP Vertical GPU Mount Loop Bracket Graphic Card Holder with LINKUP Ultra PCIe 4.0 X16 Gen4 Riser Cable 90 Degree Right Angle 20cm Black Kit

  • Compatible with chassis with “open” PCI slot design. Modding might be required..
  • Included 220mm riser Cable. Supports PCIE3.0/2.0/1.0..
  • Easy Installation, placing tray over all seven PCI slot spaces.
  • PCI Slot Required: 7. GPU Support: Dual Slot GPU..
Check Stock