Top Grade 8 Bolt Kits

Penn State Industries PKCP7500SS Magnum Bolt Action Ballpoint Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (3) Magnum Bolt Action Woodturning Project Pen Kits. You will receive (1) of each of the following finishes: Chrome (PKCP7510), Gun Metal (PKCP7520), and Gold (PKCP7500)..
  • Also includes the bushing set (PKCP7000BU) needed to make the pens.
  • Our Magnum Bolt Action Pen kits are 10% longer and wider than our best selling 30 Caliber Bolt Action Pen Kits..
Check Stock

Wheel Accessories Parts Set of 2 Wheel Adapter Spacer 5x4.75 to 5x4.75 Hub Centric 70.30mm Hub Bore 7/16\ Thread 2\ Thick- Fit Buick, Cadillac, Chevrolet

  • Fitment: Fits Buick, Cadillac, Chevy, Oldsmobile, Pontiac with 5x4.75" Vehicle Bolt Pattern, 5x4.75" Wheel Bolt Circle. 70.3 Hub Centric to vehicle hub and 70.3 wheel center bore.
  • Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
  • Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resistance..
  • Hub Centric Adapter provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This adapter is for a wheel and vehicle hub diameter of 70.3mm only..
  • Specs: Thickness: 2" | Vehicle Bolt Pattern: 5x4.75" | Wheel Lug Pattern: 5x4.75" | ID (Vehicle Hub Size): 70.3mm | OD (Wheel Hub Size): 70.3mm | Stud and Lugs Thread: 7/16"-20 | Color: Black | Quantity: 2.
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

8x170 Wheel Spacers 2' (50mm) for Ford F250 F350 Excursion, 2PCS 8x170mm Hubcentric Wheel Adapter Hub Bore 125mm with M14x1.5 Studs Compatible with 2003-2020 F250/F350 Super Duty | 2003-2005 Excursion

  • 【2PCS Wheel Spacers】- Thickness: 2″ (50mm) | Vehicle Bolt Pattern: 8x170mm (8×6.69″) | Wheel Bolt Pattern: 8x170mm (8×6.69″) | Center Bore: 125mm | Thread Pitch: M14x1.5..
  • 【Ford Wheel adapters】- Compatible with 2003-2005 Excursion, 2003-2020 F250 Super Duty, 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 F350 Super Duty.
  • 【High Quality】- Forged from 6061-T6 aluminum alloy, CNC automatically machined to ensure high precision and stability, with anodized and heat-treated surfaces to enhance corrosion resistance, and comes with 10.9 grade premium studs..
  • 【Spacer Features】- Provide additional clearance between the wheel and hub assembly, thereby improving the vehicle’s performance in terms of handling and traction. It will make your vehicle more stable and allow installation of lift/lowering kits and larger traction tires..
  • 【Important Notes】- Before purchasing these wheel spacers, please recheck your vehicle compatibility (year/make/model) in the product description. If you have any questions, please contact the customer service team for further assistance..
Check Stock

Wheel Accessories Parts Set of 2 Hub Centric Wheel Spacer/Adapters - Thickness: 1.5\ - 5x5.5 to 5x5.5 - Lug/Stud Thread: 9/16\ - Hub Bore: 77.8mm - 5 Lug (2 Pc, 1.5\

  • Fitment: Fits Chrysler Aspen, Dodge Durango, Dakota, Ram 1500, Mitsubishi Raider with 5x5.5" Vehicle Bolt Pattern, 5x5.5" Wheel Bolt Circle. 71.5 Hub Centric to vehicle hub and 71.5 wheel center bore.
  • Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
  • Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resistance..
  • Hub Centric Adapter provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This adapter is for a wheel and vehicle hub diameter of 77.8mm only..
  • SPECS: Thickness: 1.5" | Vehicle Bolt Pattern: 5x5.5" | Wheel Lug Pattern: 5x5.5" | ID (Vehicle Hub Size): 77.8mm | OD (Wheel Hub Size): 77.8mm | Stud and Lugs Thread: 9/16"-18 | Color: Black | Quantity: 2.
Check Stock

Wheel Accessories Parts Set of 2 Hub Centric Wheel Spacer/Adapters - Thickness: 2\ - 5x5.5 to 5x5.5 - Lug/Stud Thread: 14x1.5 - Hub Bore: 77.8mm - 5 Lug (2 Pc, 1.75\

  • Fitment: Fits Ram 1500, 1500 Classic with 5x5.5" Vehicle Bolt Pattern, 5x5.5" Wheel Bolt Circle. 71.5 Hub Centric to vehicle hub and 71.5 wheel center bore.
  • Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
  • Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resistance..
  • Hub Centric Adapter provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This adapter is for a wheel and vehicle hub diameter of 77.8mm only..
  • SPECS: Thickness: 2" | Vehicle Bolt Pattern: 5x5.5" | Wheel Lug Pattern: 5x5.5" | ID (Vehicle Hub Size): 77.8mm | OD (Wheel Hub Size): 77.8mm | Stud and Lugs Thread: M14 x 1.5 | Color: Black | Quantity: 2.
Check Stock

ABN Brake Tool Sets w/ 18 Pc Disc Brake Caliper Tool Kit & 8 Pc Drum Brake Tool Kit – Removal and Installation Tools

  • This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles.
  • All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals.
  • DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes.
  • Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project.
  • EASY STORAGE: Heavy-duty 14 x 3 x 12.3-inch (35.5 x 7.6 x 31.2 cm) plastic blow-molded carrying case with latches and handle protects these brake kits for easy transportation, safe storage, and quick organization.
  • CONTENTS: Brake caliper kit includes a holding plate, right and left-hand thrust bolt, a 3/8” drive adapter, 4 single pin discs, 6 two pin discs, 1 three pin disc, 1 four pin disc, 1 no pin disc, and 1 hex disc.
  • Drum brake tools include break spring installer, brake spring pliers, spring compressor, brake adjustment spoon, 2 spring removers, and 2 brake spring retainers.
Check Stock

Wheel Accessories Parts Set of 2 Hub Centric Wheel Spacers Adapters 5x5.5 to 5x5.5 with 77.8mm Center Bore 1.5\ Thickness 14x1.5 Thread Black - Fits Ram 1500, Ram 1500 Classic

  • Fitment: Fits Ram 1500, 1500 Classic with 5x5.5" Vehicle Bolt Pattern, 5x5.5" Wheel Bolt Circle. 71.5 Hub Centric to vehicle hub and 71.5 wheel center bore.
  • Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
  • Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resistance..
  • Hub Centric Adapter provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This adapter is for a wheel and vehicle hub diameter of 77.8mm only..
  • SPECS: Thickness: 1.5" | Vehicle Bolt Pattern: 5x5.5" | Wheel Lug Pattern: 5x5.5" | ID (Vehicle Hub Size): 77.8mm | OD (Wheel Hub Size): 77.8mm | Stud and Lugs Thread: M14 x 1.5 | Color: Black | Quantity: 2.
Check Stock

Wheel Accessories Parts Set of 2 Hub Centric Wheel Spacer/Adapter - Thickness: 2\ - 8x6.5 to 8x6.5 - Lug/Stud Thread: 14x1.5 - Hub Bore: 116.7mm - 8 Lug (2 Pc, 2\

  • Fitment: Fits Chevrolet Express, Suburban, Silverado, GMC Suburban, Savana, Sierra, Yukon XL, Hummer H2, Nissan NV1500 NV2500 NV3500 with 8x6.5" Bolt Pattern/Bolt Circle. 116.7 Hub Centric to vehicle hub and 116.7 wheel center bore.
  • Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
  • Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resistance..
  • Hub Centric Adapter provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This adapter is for a wheel and vehicle hub diameter of 116.7mm only..
  • Specs: Thickness: 2" | Vehicle Bolt Pattern: 8x6.5" | Wheel Lug Pattern: 8x6.5" | ID (Vehicle Hub Size): 116.7mm | OD (Wheel Hub Size): 116.7mm | Stud and Lugs Thread: M14 x 1.5 | Color: Black | Quantity: 2.
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

PSI Woodworking PKCPBAPAK 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (3) 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Woodturning Project Kits. You will receive (1) of each in: Gun Metal (PKCP8020), Chrome (PKCP8010), and Gold (PKCP8000).
  • Also includes the bushing set (PKCP3000BU) needed to make the pens.
  • Features a 3/8" single tube design, our patented bolt action mechanism, and a Parker style ballpoint black refill. Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/2"..
  • Patent No. : US D682, 352 S. Pen blanks are not included. The realistic bolt action handle smoothly advances and retracts to securely lock the refill in place. Each pen kit includes a bolt action rifle clip, a replica 30 caliber cartridge, and a rose gold bullet tip..
Check Stock

Complete Rear-End Bolt-On Rear Disc Brake Kit Conversion, Universal, Fits Ford 9-Inch

  • Disc brake stopping power for your Ford 9 inch or 8 inch rearend at nearly the same cost as rebuilding/replacing drum brakes.
  • Kits includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers (non-emergency brake), brake pads and hardware for increased stopping power.
  • Fits over an axle with maximum flange diameter of 6-1/4" O.D..
  • Rotors have a 2.780" center hole with both 5 on 4-1/2" and 5 on 4-3/4" bolt circles.
  • Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".
Check Stock