Top Graphics Card For Dogecoin Mining

PXY-ELEC Complete Mining rig System. BTC-X79-5 Mining Motherboard 5 PCI-E 3.0 Graphics Card Slots, Including CPU, SSD,(8G) RAM, PSU, Support 3060GPU Full Speed ETH Miner (Without GPU 8G RAM)

  • BTC-X79-5 card mining machine is optimized for 3060 LHR v1, and the single card computing power of 3060 graphics card is as high as 48MH/s or more. The noise during operation is around 55db. It runs very quiet, very suitable for home use ，X79-5 card mining machine motherboardsupports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards.
  • This is a complete set of miners (note no GPU), it already contains: x79 motherboard, intel 2609 v2 CPU, 8GB RAM, 128GB SSD, 1800w power supply, 6 PIN cable to (6+8) Pin*5pcs, 3 Fan, metal frame. Lifting kit, only need to prepare graphics card, monitor, mouse, keyboard to run..
  • X79-5 card mining machine main board adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. Note the width of the graphics card. When using hiveos to start, enter the BIOS to set the U disk to start, wait 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
  • If you want to use other CPUs, please use CPUs below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2, etc. You can also install additional layers, each miner is equipped with parts.
Check Stock

IIAzimps PCI-E Riser Card 010S 8 Solid Capacitors GPU Risers Adapter Card PCI-Express 1X to 16X Riser Card for Bitcoin Ethereum Mining BTC ETH Miner Rig (3 Pcs Pack)

  • ...ded version of the GPU risers 009S, expand the motherboard PCIE 1X to PCIE 16X slot, use gold plated contacts to ensure flawless connectivity and long life. Mainly designed for Bitcoin Ethereum Crypto Mining rigs and other GPU mining equipment..
  • More Stable and Secure: The graphics card power supply adopts 8 solid capacitors to ensure the graphics card mining stably and secure..
  • Multi-interface Design: 4PIN+6PIN interface design, With SATA 15pin Male to 4pin/6pin power cable, makes the graphics card power independent of the motherboard to reduce the burden on the motherboard when connecting multiple graphics cards..
  • Thoughtful Design: The PCI-E USB 3.0 cable uses multi-layer shielded wire, which can be connected to a maximum of 3M without attenuating the signal. 6 marquee LED lights display working status. The graphics card slot is metal shielded to prevent interference and with a fastening buckle, which provide a firmly connect..
  • Wide Compatibility: This GPU riser kit is compatible with 1x, 4x, 8x, 16x PCI-E slot of the motherboard. Suitable for all WINDOWS, LINUX and MAC systems.....
Check Stock

SUOHUI Complete GPU Mining Rig for Ethereum Classic ETC/ETH/RVN/Flux/Rego with 8 GPU Mining Motherboard,PSU,RAM, SSD, Open Frame Mining Machanie(ExcludingGPU/1 Layer Miner)

  • ...ut, which can reduce the defective rate of electronic components and improve the product quality. Easy start in minutes! Note: NOT include GPUs..
  • 【Professional Mining Power Supply】 1800W full voltage power supply allows to mine at home easily. The 10 customized long-line power cables directly power mobo and each graphics card without an adapter cable, avoiding burning the card due to poor contact, providing the best security for your mining..
  • 【4*4500 RPM Silent Cooling Fans】The mining machine has 4 powerful GPU cooling fans with a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. Equipped with the bottom plate to prevent turbulent airflow and achieve excellent efficient heat dissipation..
  • 【Stackable Open-air Mining Frame】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being over shaped. The open-air frame ensures that the graphics card is not limited in length. You can easily stack multiple SUOHUI mining rigs at will without covering too much space..
  • 【Quick and Professional Support】 We care about the customer and value your time. Our experienced after-sales team will ensure that your problem is properly resolved.For any ques....
Check Stock

Block Create Unlimited Miner - Purple Edition | Crypto Miner | Play to Earn | Passive Income | Algorand Blockchain | Metaverse

  • Litecoin Miner: L3+ is a dual-coin merged miner of Litecoin & Dogecoin. Has high computing power and efficiency: 504 MH/s (expected to fluctuate +/- 5%), Power consumption 800W+10%. Dimensions 8.66 x 18.11 x 11.02 inches.
  • Durable: This Scrypt Litecoin Miner has a built-in controller, and no separate host is required for operation. The chassis is made of premium aluminum alloy material, which is integrated and durable. With dual fans and independent heat sinks, the heat dissipation effect is good.
  • Stable: This LTC Dogecoin Mining Machine has a tight industrial power interface, which can be closely contacted and fitted to ensure long-term and stable output of power.
  • Note: The power consumption efficiency of the Scrypt ASIC Litecoin Miner will vary depending on the PSU, ambient operating temperature and the accuracy of the power meter. Please be careful to avoid dust and catkins, so that the heat of the ASIC Miner cannot be dissipated.
  • Equipment Condition: Our L3+ Litecoin Mining Machine is in good condition, dust free, used but like new. We will wipe, clean and debug them before shipping to make sure they work properly. If you encounter any problems, please contact our team in time.
Check Stock

ACTIMED PCIE Riser 1X to 16X GPU Riser (6PIN/MOLEX/SATA Powered) 10 Capacitors, PCI Express Risers Adapter Card for BTC/ETH/GPU Mining Rigs, with 60cm USB 3.0 Cable and LGB-7 Color Lights, 6 Pack

  • ...IE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on BTC Ethereum Mining rigs or GPU Mining rigs..
  • 【10 High-quality solid capacitors】10 FP independent solid capacitors are customized for the graphics card power supply. Compared with the general 4-8 capacitors, the graphics card power supply can be more stable and safe. effectively solving the problem of insufficient power supply capacity.Build in electric circuit protector keep device away from over current, over heat and over voltage..
  • 【3 power supply methods】3 power supply methods are used: SATA power interface, 6Pin power interface, and 4-pin interface power supply.Multiple power supply methods solve the problem of power mismatch. Reduces the power supply burden on the motherboard and can be freely selected according to the actual usage environment.(Please reserve 10W power supply for riser when configuring power supply).
  • 【Steel graphics card slot】The middle graphics card slot is a reinforced metal structure. Compared with the plastic bayonet, the metal bayonet has a tighter s....
Check Stock

Antminer L3+ 504MH/S Litecoin Miner, Professional ASIC Litecoin Dogecoin Mining Machine, Scrypt Algorithm LTC Miner & Dogecoin Miner

  • Litecoin Miner: L3+ is a dual-coin merged miner of Litecoin & Dogecoin. Has high computing power and efficiency: 504 MH/s (expected to fluctuate +/- 5%), Power consumption 800W+10%. Dimensions 8.66 x 18.11 x 11.02 inches.
  • Durable: This Scrypt Litecoin Miner has a built-in controller, and no separate host is required for operation. The chassis is made of premium aluminum alloy material, which is integrated and durable. With dual fans and independent heat sinks, the heat dissipation effect is good.
  • Stable: This LTC Dogecoin Mining Machine has a tight industrial power interface, which can be closely contacted and fitted to ensure long-term and stable output of power.
  • Note: The power consumption efficiency of the Scrypt ASIC Litecoin Miner will vary depending on the PSU, ambient operating temperature and the accuracy of the power meter. Please be careful to avoid dust and catkins, so that the heat of the ASIC Miner cannot be dissipated.
  • Equipment Condition: Our L3+ Litecoin Mining Machine is in good condition, dust free, used but like new. We will wipe, clean and debug them before shipping to make sure they work properly. If you encounter any problems, please contact our team in time.
Check Stock

Mining Rig Frame 8 GPU 70mm Slots with 8 Fans Crypto Ethereum Miner Case with Barebone Motherboard for ETH/ZEC Cryptocurrency System Machine with SSD/RAM Without GPU/PSU

  • 【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM.
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs....
  • 【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports,....
  • 【Mining rig case】The rig doesn't come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling....
Check Stock

Foyozisun GPU Mining Rig Complete System Ethereum ETC Crypto Miner with 8 GPU Mining Motherboard and 1800W Power Supply 8G RAM (Without GPU)

  • Mining Rig Complete System: Stackable open frame Complete System, Specially designed for crypto mining -ETH,ETC,FLUX,REGO,Ravencoin,Monero, Dogecoin, etc.supports Win10, Linux, hiveos (spark), nicehash, minero (os) and other operating systems..
  • 8 GPU Mining Motherboard: Intel-B85 mining motherboard.The 65mm distance gives the GPU enough space for air circulation, suitable for RTX3060, 3070, 3080, 3090, 6600, 6700, 1660s/2060 and other AMD/NVIDIA GPUs..
  • 1800w Quiet Supply Power: Both 110V and 220V can be used. easy to setup and very quiet..
  • Arrived fast : We ship from the amazon FBA warehouse in thEasy&Fast installation in 30 minutes with video detailed guide.Instant gratification!.
  • GPU Mining rig Including :B85 motherboard, 1800W Supply Power , CPU,128GB mSATA SSD, 8G DDR 3, 3000 rpm cooling fan * 4. win10 system (not activated) Without GPU. For any questions, please feel free to contact us.We will provide professional technical support..
Check Stock

Newest VER009S PCIE Riser Express Cable 1X to 16X (Dual-6pin / MOLEX) with Led Graphics Extension Ethereum ETH Mining Powered PCI-E Riser Adapter Card, with 24inches USB 3.0 Cable, 6 Pack

  • High-performance PCI-E Riser Board: This PCIE riser can expand the motherboard PCI-E X1 slot to the PCI-E X16 slot. It will provide safe and reliable connections with more PCI-E X16 graphics cards. It will be mainly used to build small open-air equipment or a large rack-mounted miner..
  • The Safety and Stability You Want: This GPU riser is equipped with 4 upgraded FP solid capacitors, which are a reliable source of safe and stable power. They can perfectly prevent overheating and overvoltage and provide reliable protection for power transmission..
  • Yes, It’s of Course VER 009S: 009S version of the riser mining kit is the latest and most advanced solution for setting up GPU mining equipment. Suitable for all Window systems, LINUX and MAC..
  • More Choices: This PCIE riser 1x 16x have 4PIN and two graphics card 6PIN interfaces (two 6PIN interfaces have different directions) are optional power supplies. They can provide an independent power supply of the graphics card-Enhance power supply performance, which solve the problem of insufficient power supply and easy burnout.
  • and reduces the burden on the motherboard when using more graphics cards..
  • Upgrade Design: This mining PCIE riser has 24inches (60cm) USB 3.0 cable, the cable with shielded net inside is more s....
Check Stock

PCIe Riser Card 1X to 16X GPU Riser for Mining Rigs, 6Pin Risers with 8 PCS Solid Capacitors, USB3.0 Cable, Upgrade Version Ver010x Riser for Ethereum Bitcoin Miner Rigs (6 PCS)

  • 【Latest version: ver010x riser card for mining rigs, it features gold-plated contacts and has good performance, Anti-burn machine chip to make graphics work more safe】.
  • 【Reduce Motherboard Burden: 4pin interface and two 6pin interface (two 6PIN interface directing differently) are optional to power, which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards.】.
  • 【The PCI-E riser card features a stable resistance, ver010x riser card for bitcoin, Litecoin and mining rig. It is has 5 LED light to display the working states】.
  • 【8 PCS high quality solid capacitors will improve power stability to GPU, keeping gpu riser mining rig devices away from overheating and over voltage.】.
  • 【Works with Most Systems】 Our VER 010X riser with a fixed buckle that make sure the graphics card will not fall off from the slot. It is compatible with 1x, 4x, 8x, 16x PCI-E slots, suitable for all Window, LINUX and MAC systems..
Check Stock

Mining rig B85 8GPU Full Mining Machine, Used to Build The Mining System of Bitcoin Mining Machine and GPU Mining Machine, Including Motherboard, CPU, SSD, RAM.PSU (Motherboard)

  • ❤ Professional and powerful, the latest mining motherboard. Provides the highest signal quality..
  • ❤8 graphics card slot motherboard, 65mm large graphics card spacing, no need to switch more stable..
  • ❤Support four or five generations of CPU, DDR3 notebook memory slot, support 1660, 2070, 3090, rx580 and other series of graphics cards..
  • ❤ Please note: B85-miner motherboard includes 1820/1840CPU, 128GB SSD, 4GB RAM,.
  • ❤ B85 chip, all solid capacitors, professional mining motherboard, 100 Gigabit network card..
  • ❤ When you encounter problems in use, please contact us, we provide professional technical support..
Check Stock

Miertou VER010S-Plus High Power PCI-E Riser 16x to 1x for Bitcoin ETH Coin Mining,Powered Riser Adapter Card, 4 Solid Capacitors,GPU Crypto Currency Mining Cable with USB Power Cable,with LED

  • Miertou VER010S high-performance PCI-E express riser can extend the motherboard PCIEX1 slot to PCIEX16 slot. Will provide a safe and reliable connection with more PCIEX16 graphics cards. It will be mainly used for Ethereum mining rigs or GPU mining rigs..
  • The graphics card power supply adopts 8X solid capacitors to make the graphics card power supply more stable and safer. The extension cable with 6-pin port enhances the power supply and completely solves the problem of insufficient power supply capacity and cable burning..
  • The slot fixing bracket is designed to remove and set up the graphics card. The card will not fall off from the slot. It can be converted into a SATA port and a SATA to 6pin line, so that the power supply of the graphics card is independent of the motherboard..
  • 60cm USB3.0 cable, very soft, easy to place and route. Cables with built-in shielding nets are more stable. PCI-E1x to 16x power riser adapter card with multi-layer shielded cable will not weaken the signal within 3 meters..
  • After-sales service: If you have any questions, please feel free to contact us! , we will reply to you within 24h!.
Check Stock