Top Grip Range 1 313 1 437

BVV 1/4\ 37 Degree Female JIC Stainless Steel Hose-24-inch

  • 1/437° Female JIC Stainless Steel Braided PTFE Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications..
  • They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have female JIC swivel on each end and they DO NOT require Teflon tape to create a seal | BVV 1/437 Degree Female JIC Stainless Steel Hose..
Check Stock

Monoprice - 133870 MP Select PLA Plus+ Premium 3D Filament 1.75mm 1kg/Spool Blue

  • PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution..
  • It does not require a heated base and has a very low shrinkage rate (0.3 percent)..
  • This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm..
  • It has a nominal processing temperature range of 205 ~ 225 degree C (401 ~ 437 degree F)..
  • Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament..
Check Stock

5/16 -18 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw 5 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Inch Screw Industry Standards: ASME B18.3 Fastener Finish: Plain Thread Direction: Right Hand Temp. Range: 250 Degrees F Thread Dia.: 5/16" Length: 1" Basic Material: Stainless Steel Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Head Height: 0.313" Head Dia.: 0.469".
  • Screw Head Type: Vented Rockwell Hardness: B70 to B95 Screw Style: Socket Head Cap Screw Thread Style: Fully Threaded Material Grade: 18-8 Thread Length: 1" Vented Hole Size: 0.078" Drive Size: 1/4" Dia./Thread Size: 5/16"-18 Country of Origin (subject to change): Multiple.
Check Stock

NH404UD Replace Remote fit for Magnavox TV 39ME413V/F7 46ME313V/F7 46ME313V/F7A 40ME313V/F7 39ME313V/F7 39ME313V/F7A 50ME313V/F7 40ME314V/F7 40ME324V/F7 55ME314V/F7 39ME313/F7A 55ME345V/F7 50ME345V/F7

  • New NH404UD Replacement Remote Control fit for Magnavox TV 43ME345V/F7 32ME305V/F7 39MF412B/F7 50MF412B/F7 39ME413V 46ME313V 40ME313V 39ME313V....
  • 40ME313V/F7 39ME313V/F7 39ME313V/F7A 50ME313V/F7 40ME314V/F7 40ME324V/F7 55ME314V/F7 39ME313/F7A 55ME345V/F7 50ME345V/F7.
  • No programming or paring is needed.Just install new batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery. Batteries and manual are not included..
  • Please feel free to contact us if you have any query, thanks!.
Check Stock

MG Chemicals - 832HT-375ML 832HT High Temperature Black Epoxy Encapsulating and Potting Compound, 11.5 fl. oz 2-Part kit

  • Suitable for very high temperature applications.
  • service temperature range -40 to 225 °C (-40 to 437 °F).
  • Extreme resistance to chemicals. water and humidity (allows for submersion where needed).
  • Extreme compressive and tensile strength.
  • Excellent electrical insulating characteristics.
Check Stock

Wise 8WD437SS-R-B Swingback Cooler Seat Replacement Back Cushion

  • Replacement Back Cushion for 8WD437SS Swing Back 62 Qt. Livewell Cooler, Length: 32".
  • High Compression Foam Padding, Heavy Duty Marine Grade Vinyl with Embossed Detail.
  • Exact OEM Replacement Back Pad for Wise 8WD437SS 62 Quart Swing Back Cooler.
  • 32" Wide with pre tapped 1/4" x 20 threaded T-nuts (2 on each side).
Check Stock

EZ SPARES 2Pcs Eureka DCF-10 & DCF-14 Filter Hepa Fits Optima Series Replacement Attachment Compatible Part # 62731 & 62396

  • 2 Eureka DCF-10 & DCF-14 Dirt Cup Filters.
  • Easy to install so you can get back to cleaning as soon as possible! Simply remove your old filter and put this brand new one in it’s place! Compare to Eureka Part Nos. 62731, 62396..
  • Fits Eureka Optima Vacuum Cleaner Models: 437AZ, 437AZE, 437AXZ, 437-AXZ, 437-AZ, 437-AZE, 431A, 431AE, 431AX, 431AXZ, 431AXZE, UK431A.
  • Washable & Reusable. Essential For Allergy Sufferers.
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Transparent,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Luminous Blue,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Fluorescent Orange,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Fluorescent red,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Luminous Yellow,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock