Top Groove Turning Inserts Bars

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

3PCS 5/8\ CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)

  • ★Package Included：3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ).
  • 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331).
  • ★Shank Diameter （length×width）: (16*16mm ≈ 5/8"x5/8" ).
  • Overall Length：(100mm ≈ 3-7/8" ) ,Cutting Direction：right hand..
  • ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
  • ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder).
Check Stock

MABUARN 5/16 Shank Nickel Plated Turning Holders 7 Sets CNC Lathe Turning Tool Holders with Indexable Carbide Inserts for Turning Grooving Cutting Threading

  • Turning tool holders material: High speed steel.
  • 5/16" (8mm) shank. Indexable Inserts material: tungsten carbide. Stable and durable..
  • Surface treatment: Nickel plated, quenching and hardening..
  • Model of 7 pieces turning tool holders: MGEHR0808-2, SER0808H11, SDNCN0808H07, SDJCR0808H07, SWLCR0808H04, SCLCR0808H06, SCLCL0808H06. Model of 7 pieces applicable inserts: MGMN200, 11ER AG60, DCMT070204, WCMT040208, CCMT060204.
  • Suitable for: CNC lathe external turning, threading, grooving, cutting, etc..
  • Packing includes: 7 pieces turning holders, 7 pieces carbide inserts, 3 pieces keys, and 1 piece aluminum case..
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

SDJCL 1212H07 1/2\ 93° External Turning Holders Lathe Turning & Profiling Tool Holder Lathe Turning Boring Bar for 55° Carbide Inserts DCMT32.5/DCMT21.5 (SDJCL1212H07)

  • Turning tool holders material: 40Cr-42CrMo steel.
  • 5/8" (16mm) shank. Indexable Inserts material: tungsten carbide. Stable and durable..
  • Surface treatment: Quenching and Hardening..
  • Model of 7 pieces turning tool holders: S16Q-SCLCR09, SCLCR1616H09, SDJCR1616H11, SDNCN1616H11, SNR0016Q16, SER1616H16, MGEHR1616-3. Model of 7 pieces applicable inserts: CCMT09T304, DCMT11T304, 16IR AG60, 16ER AG60, MGMN300..
  • Suitable for: CNC lathe Internal and external turning, boring, threading, grooving, cutting, etc..
  • Packing includes: 7 pieces turning holders, 7 pieces carbide inserts, and 7 pieces wrenches..
Check Stock

MAXTOOL 2PCs 16NR12ACME Internal American Acme Indexable Threading Inserts 3/8\ I.C. 12 TPI Carbide TIALN-Coat; 16NR12ACME-T02

  • ♥Package includes ：11pcs 16IR A60 inserts, 1pc SNR0013M16 holder, 1pc wrench T15.
  • ♥Turning holder : tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
  • ♥16IR inserts pitch : AG60 60°, machining pitch range: 0.5mm~3.0mm. Inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Holder Cutting direction: Right, Shank Diameter :1/2" inch ≈ 13mm, Over Length: 6" inch ≈ 150mm.
  • ♥Package: The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

Mann Lake FR812 100-Pack Unassembled Grooved Top and Bottom Endbars without Holes, 6-1/4-Inch

  • Unassembled groove top and groove bottom frames with no holes.
  • Standard outside dimensions, works with all uncapppers.
  • Includes 200 end bars, 100 top bars, and 100 bottom bars per pack.
  • With this 6-1/4-inch frames, use 6-5/8-inch supers and 5-5/8-inch foundation.
  • Measures 19-inch length by 1-3/8-inch width by 6-1/4-inch height.
Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

  • 【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
  • 【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
  • 【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
  • 【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....
Check Stock

20 Pieces Carbide Turning Inserts TCMT110204 TCMT21.51 TCMT Insert Tain Coated CNC Lathe Inserts for Lathe Turning Tool Holder

  • Carbide Turning Inserts are made of high quality carbide material, not easy to rust and durable..
  • Carbide Inserts are hard and sharp, cutting faster and more efficient..
  • Suitable for turning and finishing machining steel, stainless steel, cast iron and non-ferrous metals materials..
  • 20 pieces gold carbide inserts in a plastic box, easy to store..
  • Size: TCMT110204 TCMT21.51, 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

  • PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
  • Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
  • If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..
Check Stock