Top Grooving Bending Machine

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

• Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
• 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
• Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
• Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....

800W Compact Wood Router Tool, Portable Handheld Palm Router Woodworking,Electric Trimmer Wood Router with 15pcs Router Bits,Wood Laminate Router for Woodworking Handicraft and DIY

• ...cessed part of the wood easier and avoid the trouble of wood chips at the same time. The portable body makes it easy to use, store and move..
• ✔️ 15pcs Milling Cutters:15-piece set with precisely machined sharp tungsten carbide blades for edging, trimming, texturing and grooving of solid wood, medium density fiberboard, particleboard, plywood, etc.The included wooden case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects..
• ✔️ High-Quality and High Efficiency: The woodworking trimming machine is made of high-quality aluminum + plastic. it uses copper motor, which is strong power, low heat. The power of the motor is 800W and the speed is 3000rpm..
• ✔️ Wide Use: This electric trimmer is widely used in wood processing, cabinet processing, handicraft production, plastic sheeting, wood veneer and other similar materials chamfering, grooving, surface finishing, curve cutting, planning wood edge, pattern processing operations activities and DIY. Easy to wood trimming, grooving..

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

• QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
• DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
• DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
• SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
• SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..

FomaSP SPB2-26 26mm High Tool Holder for Grooving Adjustable Blades for GTN-2(SP200) Inserts, 1 PCS

• Application External Grooving Parting off, fit for all CNC lathes and manual lathes, good at grooves, parting off..
• Easy removal of grooving inserts with user..
• Boring bar with high speed steel shank, strong shock resistance, thermal cracking and resistance to deformation.

VAN ALSTINE G-1000, TIRE GROOVER, GROOVING IRON, W/BLADES, SOUTHWEST SPEED INC

• Brand New Deluxe Van Alstine Tire Grooving Kit (Part # G-1000) | * The G-1000 comes with a starter assortment of blades | * It operates on 110 volts.
• Unlike other groovers, this deluxe groover is instantly hot You don't have to wait for it to heat up to begin grooving When you plug the G-1000 in, it instantly heats to the setting on the dial, which has adjustable heat settings 1 through 4 This kit is great for numerous applications including race car tires, truck tires, motorcycle tires, karting tires, ATV tires, industrial tires, etc.
• Essentially, this groover is your easiest and most accurate choice for any tire grooving application | * Designed to be fast, smooth, & easy Glides over the tire surface Gives a precise, consistent cutting depth.
• virtually automatic | * Cuts with less heat than most groovers, which prevents heat degradation to race tire surface | * Unparalled control | * Instant blade change & adjustment.
• The Van Alstine G-1000 is designed to meet the exacting demands of modern tire grooving | * Its ease of use makes it possible for anyone to cut quickly & accurately | * The patented design of the G-1000 offers many advantages: The instant blade change & adjustment feature is critical for proper grooving | * This enables the operator to e....

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

• 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
• 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
• Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
• Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

• 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
• 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
• Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
• Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....

VEVOR SBG-40 Metal Scroll Bender High-Hardened Steel Scroll Bender Combination of Scroll Radius and Angle Bending Universal Metal Rod Bender For Steel Brass Cooper Aluminum

• 5/8" Bending Capacity: The bender can easily and smoothly bend max thickness stocks the diameter of 5/8" tubes. And The metal bending tool is made of high-hardness steel.
• it can be used for a long time. The heavy base improves stability during operation..
• 3 in 1 Bender: Our bender has a multi-function of bending. It can achieve angle bending, radius bending and scroll bending. Thus, the machine can meet different usage needs, making your work more convenient..
• Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. Max flat steel size: 1-3/16" x 5/16"(30 x 8 mm), max round steel size: 5/8" (15.8 mm) , max square steel size: 19/32" (15 mm)..
• Energy-saving Structure: The metal bender adopts long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground..
• Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron lamps, power construction, road building, bridges pipeline laying or repairing, etc..

Compact Wood Router, Trim Routers Hand Edge with 1/4 Inch Collets, 110V 800W 30000R/MIN Handheld Routers for Woodworking, Hand Wood Carving Trimming

• 【Durable】LOONPON wood router is made with high quality Aluminum + Plastic which is durable to use and have long service life..
• 【Easy Operation】The transparent base allows you to clearly see the trimming and easy operation. The transparent base design has high precision and is easy to identify during processing. Adjustable knob, scale can be adjusted..
• 【Power Design】Power is 800 watts, the voltage is 110V, the chuck diameter is 6.35mm, and the power is 30,000 rpm. The 1/4" motor can provide enough power for wiring and fine-tuning applications. Effective heat dissipation and protection of the machine. Anti-vibration, practical, simple operation, durable..
• 【Stable】The trimming guide rail and the rollers run along the curve to ensure accurate cutting and fine curve processing. Linear guide rail, thicker model is stable, no deformation, linear processing stable wooden wrench can tighten router head..
• 【Widely Used】Widely used in wood processing, cabinet processing, handicraft production, plastic sheeting, wood veneer and other similar materials chamfering, grooving, surface finishing, curve cutting, planning wood edge, pattern processing operations activities and DIY. Easy to wood trimming, grooving..

Cavnewt Hat brim bender,Hat rack,Hat shaper,Hat organizer for baseball cap,Hat pins for fitted hats,Fitted hats for men,Hat curving band,Hat bender brim,Hat curving tool,Fitted hat,Caps

• 【Easy to use】Insert the hat into the hat bending tool and leave it for more than 24 hours, the curve of the brim can be perfectly displayed. Use the hat bending tool to stand for more than 24 hours before participating in activities or wearing a hat, and the curve after bending is perfect..
• 【No environmental restrictions】The hat bending machine is easy to carry and can be used on the table, door hat rack, hat hook, and can also be used outdoors.
• 【Sturdy and durable】The hat shaper uses high-quality abs, which is flexible in bending and will not be easily broken, caught by the door, and will not break.
• 【Two options】The hat stylist has a large radius of 2.5 inches and a small radius of 2 inches. The edge bending machine has two bending radii to choose from, and the shape after bending is different..
• 【Wide Applicable】The hat bending tool is suitable for all visor hats,suitable for sun hats,baseball caps,fishing hats,hunting hats,cowboy hats,sun hats,casual hats, Ashland Cap,Canvas Mesh-Back Cap,Pizza Hat,Trucker Mesh Cap.

Steel Dragon Tools® 300 Power Drive and 1206 Stand for Roll Grooving or Pipe Threading 41855 42360

• Steel Dragon Tools 300 for roll grooving or pipe threading..
• Universal, 1/2 HP 115 V, 38 RPM, reversible motor..
• Ideal for use with SDT roll groovers (SDT 915 or SDT 918)..
• Can be converted to pipe threading machine with carriage kit.

Aloris Tool DA-81 Threading and Grooving Tool