Top Ground Circuit Terminal Blocks Screw

Valcom 600 Ohm Isolation Transformer

  • May be used for magnetically coupling line level audio or isolating ground references from one audio circuit to another.
Check Stock

Ciata 15 AMP, 120V, Double Pole, Toggle Switch, Industrial, Residential, On-Off, Brass Terminals, Ground Terminal, White

  • Ciata 15 AMP, 120V, Double pole toggle switch can be used in both industrial and residential applications. It can be used to control the electrical devices or equipments from a single location..
  • It consist of four brass coloured screw which is wired to the current carrying (hot) wires, which is usually black in colour. One brass terminal is connected to the incoming hot wire and other to the outgoing hot wire to the device, therefore four pairs of hot pairs from a 120-volt circuit..
  • It has a ground terminal for connection the ground wire..
  • Due to side wiring and quick-wire push-in-wiring the installation is fast and easier..
  • A double-pole has ON and OFF markings and controls a device or equipment from one location..
Check Stock

Eaton 271B 15 Amp Commercial Grade Toggle Duplex Switch, Brown

  • Commercial Grade - Toggle Combination Switches Back & Side Wire.
  • Receptacles have triple wipe line contacts and double wipe ground contacts to insure long-term plug retention.
  • Thick steel mounting strap zinc-plated for corrosion resistance.
  • Break-off provision for wiring both devices on same circuit or on separate circuits.
Check Stock

Duralec 20A Automated Monitoring Single LED GFCI With Cover Plate, Ground Fault Circuit Interrupter for Plug, 20 AMP GFI Receptacle With Decora Cover Plate, UL/DLC Premium Listed, (201502-White)

  • ... indicating the on-going protection. Once it turns off, it means power source (circuit breaker) breaks off or GFI is malfunctioning. Contact customer service for a replacement..
  • Easy Installation with back or side wiring. Standard wall plate, screws and installation instructions included. Caution: Do not unscrew the terminal screws too far or with excessive force. Do not use power tools to loosen the terminal screws. 15A/125V/1875W, ETL certified, 3-year limited warranty..
Check Stock

weideer 4 String PV Combiner Box with Circuit Breaker LED 15A Current Fuse Lightning Arreste Solar Combiner Box Waterproof with 3 Digit Combination Lock Mounting Plate for Solar Panel System

  • Product name:4 String PV Combiner Box with 3 Digit Combination Lock Mounting Plate(The current and voltage of each pin of the combiner box is up to 15A/250V DC.12V system up to 720W, 24V system up to 1440W, 48V system up to 2880W.).
  • 32A Fuse Holder Base.The fuse base has an LED indicator, if the fuse is burned out, the LED will light up.
  • 63A 2 Pole Miniature Circuit Breaker.Play the role of circuit protection and lightning protection.
  • Product advantages:Stainless steel mounting buckle, Waterproof, durable and easy to install.
  • The wiring of the combiner box adopts terminal blocks and wiring blocks, which are safe, clear and concise.
  • Product Applications:Suitable for photovoltaic grid-connected/off-grid solar power systems.
  • Product packaging:1PCS PV Combiner Box+1PCS 3 Digit Combination Lock+4PCS Lock Mounting Plate+4PCS screw.
Check Stock

Hubbell TD1000 Digital Display Module

  • Support AC and DC control signal, Relay action LED indicator, relay coil protection by means of a freewheeling diode..
  • Panasonic PA1a SPST-NO 5Amp power relay. Original Panasonic PA1a-PS pluggable socket for support replacement relay, and with removal key..
  • Dinkle high quality fireproof nylon material DIN rail mount housing, can support width 35mm, 32mm and 15mm rail..
  • High quality screw terminal blocks and clear marking label for terminal block position. Pitch 5.08mm/0.2" and 7.62mm/0.3" screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
  • High quality glass fiber FR-4 PCB, top and bottom dual copper layers..
Check Stock

Erayco USLKG5N DIN Rail Mounted Ground Circuit Connection Terminal Block, 600V 30A, Screw Clamp (Pack of 20)

  • Type: USLKG5N Ground Earth Screw Type Terminal Blocks Wire Connector.
  • Material: Nylon PA66 Housing + Fine Copper + Nickel-plated Screws.
  • Application:Conduct Electricity, Transmission of Electrical Signals.
  • Rated current: 30A. Large wire funnel entry, Solid Wire (AWG/mm2): 24-10, flexible(AWG/mm2): 24-10.
Check Stock

Hilitchi 12pcs 5 Positions Dual Row 600V 15A Screw Terminal Strip Blocks and 400V 10A Pre-Insulated Terminals Barrier Strip

  • ✅ Product Name: [1] 5P Dual Row Terminal Block Stripe.
  • [2] 12P Fork Type Terminal Stripe. Package Content : 6 x Barrier Terminal Block, 6 x Terminal Stripe (3 x Black,3 x Red).
  • ✅ [Terminal Block Stripe] 600V 15A, Material : Copper, Plastic. Our dual row screw terminal strips has a clear cover to protect accidental touching of the terminal. The shell can not break in an environment with low temperature, it is clean and beautiful with smooth surface. Safer when they are protested by the sell..
  • ✅ [Fork Type Terminal Stripe] 400V 10A, Material : Copper, PVC. With our terminal block, no more cluttered battery terminals anymore. Our terminal strips are well made sturdy and with quality and robust screws..
  • ✅ [NEAT WIRING JOBS]- The terminal blocks are easy to install and held in place by two screw holes at either end of the terminal. Bonus standard spade crimp type connectors work well and you have many options of of making individual connections or by using the whole barrier bar or part of it up to 12 connections to a single line..
  • ✅ [QUALITY AFTER-SALE SERVICE]: If you do not satisfy with our products or any questions, please come to us anytime. 12 hours quick response service. We promise to offer a satisfactory solution to all your problems..
Check Stock

Autel® Powerscan PS100 Power Circuit Probe Tester, Automotive 12V 24V Electrical Car System Diagnostic Circuit Tester, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test, 40ft Cord

  • 【Durable and Safety】Autel PS100 Circuit Probe Kit has short-circuit protected as well as a safety measure to protect the device from overload.Autel PS100 instantly checks component continuity and identifies positive, negative and open circuits. When the positive terminal is connected, the red LED light is on, accompanied by a beep. When the negative terminal is connected, the green LED lights up, along with low pitched tone. If it is an open circuit, the LED light won‘t on.
Check Stock

Micmi 20A GFCI Self Testing Outlet WR TR Weather Resistant Tamper Resistant Receptacle Ground Fault Circuit Interrupter Outlets (20A GFCI Self Test WR TR 1pack)

  • ...indicating the on-going protection. Once it turns off, it means power source (circuit breaker) breaks off or GFI is malfunctioning. Contact customer service for a replacement..
  • Easy Installation with back or side wiring. Standard wall plates, screws and installation instructions included. Caution: Do not unscrew the terminal screws too far or with excessive force. Do not use power tools to loosen the terminal screws. 20A/125V/2500W, ETL certified, 3-year warranty..
Check Stock

Fluke BT510 Battery Analyzer

  • ...lly and give you a buzzer prompt, reminding you whether the tested component is faulty..
  • [ How to Use ]: Clip the red clip to the positive electrode of the car battery and the black clip to the negative electrode of the car battery, press button to “Positive”side with LED lighting RED, conact the tip to positive terminal of tested component to active the component. If LED turns to GREEN with buzzer, stop testing and check the component if defective or not, or rating current of component is higher than that of this tester..
  • [ Packing Include ]: 1 X Power Scan, 1 x Probe Tip, 1 x Battery Hookup Clips, 1 x User Manual, 2 x clips. The cable length of the circuit tester is about 4m(13ft) which allows you access and test any electrical system easily. Note: This circuit tester can not be used for 110/220V systems, it is only used for DC 6-24V systems. Do not use on AC voltage..
  • [ NOTE ]: Before performing the test, please make sure that your tester is properly connected. Connect the red clip to the positive terminal of the car battery. Then connect the black clip to the negative terminal of the car battery. During the continuity test, the auxiliary ground wire needs to be connected to one side of the wire under test. When testing components in/out of the v....
Check Stock

PZRT 40pcs M4x8 Terminal Block Screws with 8x8mm Square Washers, Nickel Plated Carbon Steel, Silver

  • Made of high-quality carbon steel, nickel-plated surface, durable..
  • Phillips pan head screws have deep threads and do not slip..
  • The combination of the terminal block screw and square washer makes it easy to fix wires in electrical facilities..
  • It is suitable for the crimping of electrical appliances such as switches and terminal blocks..
Check Stock