Top Ground Clamp Connector

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps

  • Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders..
  • NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs..
  • OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability..
Check Stock

PLG Heavy Dutty Garden Hose Repair Fittings Male Hose End Water Hose Connector/Replacement/Mender for All 3/4-inch or 5/8-inch Garden Hose

  • Heavy Duty ,Fit 5/8 inch or 3/4 inch Garden Hoses,durable, reusable and easy to install.
  • Broken and Leaking Garden Hose Repair: Save the cost of a new hose with the hose menders and couplings. They are leakproof, rustproof, unbreakable, reusabole and easy to use..
  • Easy to Install Hose Fittings:Step 1: Examine Hose and Cut.Step 2: Put the Hose Clamp On.Step 3: Insert New End and Clamp.Step 4: Using a screwdriver, attach the clamp that came with the hose repair kit securely around the end of the garden hose..
  • Water hose connector:Connect garden hose to your hose nozzle,sprinkler,Y hose connector,outdoor faucet,hose to hose connector,faucet to garden hose adapter,water sprayer..
Check Stock

hynade Brass T-Style Welding Ground Clamp 300-Amp Wide Jaw Clamp Tool

  • Ground clamp size :7 inches long, 1.18 inches max chin opening.
  • The welding ground clamp adopt high-quality brass material, sturdy structure, strong grip, multifunctional wide-jaw grounding clamp.
  • The clamp tool suitable for most grounding situations, specially designed for heavy-duty high-current welding applications/MIG/MMA/TIG/plasma welding/cutting machines.
  • Large contact surface area provides good cable connection and positive grounding.
  • If have any questions, please contact us and we will provide you with 100% satisfactory service.
Check Stock

2-pin 8 mm LED Connector kit LED3528 Connector L-Shaped Connector 2 Needle Angle Connector T-Shaped Connector weldable Seamless Connector Jumper Connector (8 mm)

  • LED connector kits apply to 2835 3528 2-pin 8 mm LED lamp strip. Not suitable for 10 mm connectors.
  • 2 needles 8 mm LED connector support 0-4A current and 0-24V voltage input, heat resistance level is -20 to 100 degrees.
  • Note: When the waterproof LED is connected to the LED lamp strip, the silica gel on the surface of the weld region must be peeled off..
  • Easy to install. Connect the positive and negative poles of the connector. Simply insert the lamp bar into the connector and clamp the cover. No soldering and other processes.
  • It is easy to install, according to the positive and negative connections of the connector, simply insert the lamp bar into the connector and clamp the cover. No soldering and other processes..
Check Stock

Lukovee Aquarium Gravel Cleaner, Fish Tank Vacuum Cleaner Kit Tool With 2 Extendable Pipe, Glass Scraper, Water Flow Controller Clamp, (Aquarium Gravel Cleaner With Fish Net)

  • ... turtle aquarium tanks height less than 36in/92cm..
  • ➤ 【Simple Assembly, Easy Operation】 --- It’s easy to install and use. ①Connect the inlet pipe.②Insert the 6ft flexible outlet hose with water flow clamp on the other side and attach it on the bucket to prevent water from splashing. ③Spin on the orange connector to install the extension tube tightly. ④Keep pressing the air-pressing button until the water automatically flows out. ⑤Fix the controller clamp to adjust water flow..
  • ➤ 【Prevent Clogging】 --- The aquarium gravel filter cleaner can replace the water and keep it fresh. With filter basket in the tube which can avoid clogging by gravel, it’s helpful to effectively separate and remove debris in the aquarium..
Check Stock

Welding Ground Clamp 500A Electroplated Welding Earth Clip for Manual Welder Copper US Type Dutch Type(US Type)

  • ▶ GOOD WEAR RESISTANCE---This welding ground clamp is processed by electroplating, having good wear resistance, could be used for a long period.
  • ▶ GOOD CONDUCTIVITY---Adopting high quality copper, the welding ground clamp has good conductivity, easy to assemble and use.
  • ▶ PERFECT REPLACEMENT---This welding ground clamp is perfect replacement part for manual welder, with stable performance, high reliability.
  • ▶ SPECIFICATION---Condition: 100% brand new.
  • Size: 20 × 9 × 3cm / 7.9 × 3.5 × 1.2in.
  • ▶ SUPERIOR AFTER SALE SUPPORT---Please feel free to contact us for your any problems about our product. It is our pleasure to service you. Do not doubt your importance to us.
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ...accurate current readings .The current clamps are the ideal tools to extend the current ranges of Oscilloscope tools.Support Auto zero at power on, relative zero correction function.It has Band wide up to 200KHz,support low battery indication .Adopt of amorphous alloy core, with high performance, low loss ..
  • ¡¾BNC connector¡¿The current clamp Multimeter features a BNC connector and can be plugged directly use. After connected well, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps h....
Check Stock

abcGoodefg 4 Sets Brass Garden Hose Mender Female and Male Hose Connector 5/8 Hose Fittings Garden Hose Adapter Water Hose End Replacement Repair Kit with Clamp and Rubber Gaskets

  • Standard 5/8″ hose connection — The brass garden hose mender’s diameter is approx. 14mm/ 0.56 inch, fit for 5/8 inch hose for easily insert and remove hoses, please select the corresponding size before placing an order. Brass connector with the stainless tightening clamp you can make it tightly as you want. Work with your garden hose, sprayers, nozzle, etc..
  • Wide applications — This hose end replacement kit can be use to garden hose mender, end hoses male mender, end hoses female mender, hose repair mender. You can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc..
  • Easy to Use — This garden hose adapter use to repair and connect the water hose end. Easy to connect and disconnect when replacing the end of the garden hose, quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
  • Sturdy material — These hose fittings are made of brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage..
  • Packge Included — 4 Male Mender + 4 Female Me....
Check Stock

TIG Welding Torch WP17FV Flexible 13 Feet Air Cooled with 10-25/35-50 Plug Valve 0.04 -1/8 Tungsten Electrodes TIG Welder Adapter for High Frequency/Lift TIG Welder

  • [Plug Size] WP17V flexible comes with quick fitting connector 10-25 and 35-50 plug(can be replaced as needed), air cooled with valve.
  • 0.02" to 3/32" tungsten electrode available.
  • [Flexible TIG Torch] Torch head can be adjusted to any angle as you want.
  • V-style torch knob to control gas on/off for quick and convenient control of shielding gas.
  • [Applicable Models] Can work with Reboot RBM-1300/RMB-1600/RBM-2100D/RBM-1550D as those welders support a LIFT TIG mode.Also the RBT-200PD/ACDC high frequency tig welder..
  • [How to use Lift Tig?] Connect to negative on the mig or stick welder with the quick fitting connector(correct your plug),blue cable for gas connection and leave the 2pins socket along,plug the ground clamp to positive.
  • [Standard Length] 13 Feet ,M16*1.5 & Two-pin socket,please check your tig welder before orders.
Check Stock

QISF 6 Pcs Magnetic Welding Head, Welding Ground Clamp, Magnetic Welding Support,Strong Magnetism Large Suction,Copper Tail Welding Stability Clamps(2 Sets)

  • 【Feature】-- This magnetic clamp is easy to attach to any smooth metal surface, flat or curved.Strong magnetic grip which can make you welding Work more easy and simple..
  • 【Convenient work】-- Undamage the surface or car's paint,this magnetic clip is very convenient..
  • 【Wide Fits】-- The clamp can also be attached to metal poles, struts, railings or the welding table..
  • 【Material】-- Copper / Insulation Board.
  • 【Package】-- 1Pcs Single Head Magnetic Welding Ground Clamp.
  • 1Pcs Double Head Magnetic Welding Ground Clamp.
  • 2Pcs Copper Tail Welding Stability Clamps.
Check Stock

LOTOS GC01 19' Ground Cable 10-25 Ground Clamp for Plasma Cutter LTP5000D LT5000D CT520D LTPDC2000D LTP6000 TIG Welder TIG140 and MIG Welder MIG140, Black, Normal Load

  • 19 feet Ground Cable 10-25 Ground Clamp for Lotos Plasma Cutter LTP5000D LT5000D CT520D LTPDC2000D LTP6000 TIG Welder TIG140 MIG Welder MIG140.
  • More than twice longer than the original ground clamp.
  • Large electric current load capacity, safe to use.
  • Large contact area in the clamp, stable for your plasma cutter and welder.
Check Stock