Top Hand Crimp Tool

SharkBite PEX Crimp Ring Removal Tool, 1/2, 3/4 and 1 Inch Copper Crimp Rings, Orange Handles, Plumbing Fittings, 23055

  • SHARKBITE CRIMP RING REMOVAL TOOL: This SharkBite plumbing tool removes copper crimp rings from brass or poly crimp connections for fittings to be reused.
  • has 200 lbs of crimping force and features a 6 inch handle.
  • COMPATIBILITY: This plumbing disconnect tool works with 1/2 inch, 3/4 inch, and 1 inch copper crimp rings.
  • EASY TO USE: This intuitive SharkBite crimp ring removal tool allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Booms Fishing CP2 Fishing Crimping Tool for Single-Barrel Sleeves

  • Booms Fishing CP2 wire leader crimping pliers mainly used for #0-#6 single barrel sleeves size.
  • [Firmly Crimp Not Hurt Wire] Our crimping tool with six little teeth that individual pressure points on the crimp and also even when the jaws fully....
  • [Corrosion-Resistant] PTFE plated carbon steel construction for years of rust resistant service.This surface treatment better than nickle or black....
  • [A Secure Hand,Non Lost Again] The soft but textures grips for a secure hand while digging deep to save your lure. A hand string contact you hand for....
  • Drop forged high carbon steel , hardened and tempered for durability.
Check Stock

IWISS Deutsch Crimping Tool for Solid Contacts Size 12 16 20 Deutsch DT DTM DTP Connectors Amphenol AT Pins

  • Deutsch Crimping Tool: IWISS HD-2612 is a premium crimping tool for Deutsch solid contacts. Must have tool for making automotive electrical OEM wire....
  • Crimp Range: A high quality Deutch crimp tool creates a precise crimp for 26 to 12 AWG solid pin Deutsch terminals. For use with Size 20, Size 16,....
  • Four Indent Crimping: Built in die sets create a four-indent, 8-impression crimp providing the most uniform displacement of wire and contact material..
  • Applications: Ideal for repair and maintenance work of automotive electrical wiring in Truck, Bus, Off-highway, Construction, Agriculture, Mining,....
  • Tool Gauge: Periodic gaging is recommended to insure accurate calibration. Easy design provides quick results. Tests for a standardized and accurate....
Check Stock

AMZCNC Copper Tube Fittings Crimping Tool Copper Pipe Crimper Press with 1/2,3/4 and 1 inch Jaw for ProPress Copper Fitting-Manufactured Plumbing, Pipe Press Copper Crimp Tool

  • Built-in Dual Jaw: IWS-1234PS copper ring crimp tool with built-in 1/2”&3/4'' well-polished jaw, Go/No-Go gauge,and instruction manual on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Purpose: IWS-1234PS F1807 PEX crimp tool is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 2 major sizes of PEX tubing - 1/2" and 3/4" Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, etc.
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

Olsa Tools Ratcheting Wire Crimper | Crimp Tool for Wire Connectors, Butt Connectors, Spade Connectors and Insulated Electrical Connectors | Wire Terminal Crimping Tool | Professional Terminal Crimper

  • ★ PROFESSIONAL CRIMPING TOOL - This high-leverage crimper tool delivers reliable crimps every time. The tool automatically releases when the proper amount of force has been applied, ensuring every crimp is consistent..
  • ★ EASIER CRIMPING - Featuring a dual-lever design, the crimper amplifies your crimping force, easing strain on hands and ensuring an extra strong connection. Works with color-coded red, blue, and yellow terminals for 22–10 AWG wires..
  • ★ RATCHETING ACTION - The ratcheting action allows you to pause mid-crimp to get a better grip and will release automatically once the crimp is complete. It also conveniently enables you to secure a wire connector in the jaw before inserting the stripped wire into the barrel..
  • ★ ERGONOMIC HANDLES - These large, non-slip handles are designed to ensure a strong and comfortable grip. Compared to the cheap crimpers that usually come bundled with a wire terminal set, this tool is way easier on your hands, and won't leave your hands sore at the end of the day..
  • ★ OLSA TOOLS TRUST - Our deep commitment to quality is the reason why tool fanatics like you keep coming back to us for more. All hand tools from Olsa Tools are backed by a limited lifetime warranty that protects your investment against any manuf....
Check Stock

Cable Matters Crimp Tool for Cable Matters Cat 6 90-Degree RJ45 Slim-Profile Keystone Jacks with Model 180070 (Not compatible with Model 180005 Series Keystones)

  • Precision termination crimp tool simultaneously cuts and terminates all 8 conductors into a keystone jack.
  • Ensures consistent termination of Cat 6 Ethernet cables for reliable performance.
  • 50% faster labor saving keystone jack crimping tool finishes the job quickly and efficiently.
  • Ergonomic ratcheted design reduces hand fatigue and provides a rapid and clean installation.
  • Heavy duty metal tool with cold rolled steel construction is built to withstand frequent use on the job site.
  • Comfort molded grip handles with treads make the tool easy to grasp.
  • Keystone jack compatible with a precision module for our Cat6 90-Degree Slim Profile RJ45 Keystone Jacks (Model 180070 ASIN B06Y8T7NSH).
  • Convenient tool case stores the crimp tool when not in use.
  • Zippered case includes additional compartments for storing keystone jacks and other small tools.
Check Stock

Swpeet 14Pcs Professional Crimping Tool Kit, Ratcheting Wire Terminal Crimper Tool Kit with 1Pcs Cable Stripper and 10pcs 50 Ohm BNC Crimp Male / Straight Connectors for Coax Connectors

  • ☎ Crimping Tool: This tool is High quality professional crimping pliers tool, Heavy duty ratchet crimp tool, Die with .0255, Removable die, Quality handle for better control, Brand new heavy duty ratchet crimping tool for coax connectors with cable size RG-58, 59, 141, 142, LMR195, LMR240, 8/x..
  • ☎ Cable Stripper: Double blades, coax cable stripper, Fully adjustable and replaceable blades, Removes 4, 6, 8 and 12mm Insulation (Adjustable), Use easily, lock the tool over the cable, spin clockwise, then pull off the unwanted portion..
  • ☎ Crimp Male Connector: Brass (Not Alloy) material ensure higher signal transmission and connectivity, Adapter with nickel plated for durability and repeated disconnects Cable mount BNC male connector perfect Works with coaxial cable such as RG58, RG142, LMR195. Impedance:50 Ohm..
  • ☎ Crimp Straight Connector: Product Series: PL-259 cable mount RF connector Connector material is Brass (Not Alloy) ensure higher signal transmission and connectivity, Body Plating is Nickel. Contact Termination:Solder, Impedance:50 Ohm, Frequency Range:DC 0-2.5GHz..
  • ☎ Great Value: In this kit, You will not only get Professional Crimping Tool, But also you will get 1Pcs Wire Stripper and 5Pcs Crimp Male Connectors and 5Pcs Crimp Straight Con....
Check Stock

Morris 10817 Terminal Kit with Controlled Cycle Crimp Tool, 200-Piece

  • 200 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need..
  • 22-10 Awg Ergonomic Controlled Cycle Crimp Tool.
  • Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects.
  • Terminals and Disconnects are cULus Listed.
Check Stock

IWISS Pex Crimping Tool 1/2-inch & 3/4-inch Copper Ring Heavy Duty Dual Size c/w Go/No-Go Gauge Meets ASTM F1807

  • Capability: IWS-1234P PEX Crimp Tool Kit works with 2 sizes of PEX tubing-1/2-inch and....
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp s....
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate t....
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked for cor....
  • Innovation: Tool includes a gadget helps to reshape the deformed 3/4” rings and cinch rings a little bit smaller to avoid rings from slipping off....
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper： IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock

IWISS Open Barrel Terminal Crimping Tool for Molex Style DELPHI AMP TYCO Deutsch Terminals Crimper, Molex Crimping Tool,24-14 AWG

  • Open Barrel Terminal Crimper: IWS-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: Designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWS-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

HKS Spark Plug Connector Crimping Tool For Ignition Cable and Spark Plug Wire – Ratcheting Wire Crimpers – Max Diameter 8.5mm – Ratchet Terminal Crimper – Electrical Crimping Tool

  • Professional Crimper – This crimper features an efficient ratchet mechanism and finish-machined crimp die for a solid crimp. This crimping tool fits perfectly with spark plug terminals with a diameter of 8-8.5mm..
  • Precise Mechanics – The crimping process is accomplished by pressing the handle through a complete ratcheting cycle until the handle is automatically released. Due to the ratchet, you are able to secure the connector first and then insert the wire into the crimp..
  • Adjustable Crimp Force – The tool has a knob that adjusts the crimp strength to ensure the right crimp force for your project. Equipped with a quick release lever allows the crimper jaw to be opened in any position..
  • Ergonomic Handles – Ergonomic, cushioned, non-slip handles are designed to ensure a strong grip in all situations..
  • Crimp & Strip 2 in 1 – Suitable for single & dual spark plug crimp terminals.The crimper fits for the spark plug wire diameter of 8.5mm..
Check Stock