Top Hand Saw For Cutting Fence Posts

PORTER-CABLE Chop Saw, 15-Amp, 14-Inch (PCE700)

  • 15 Amp, 3,800 Rpm Motor With Replaceable Brushes Provides Power And Durability For The Chop Saw.
  • Quick-Release Material Clamp Of The Metal Chop Saw Allows For Easy Material Cutting And Removal.
  • Cutting Fence With Miter Adjustment Of The Metal Cutting Saw Allows Up To 45 Degree Angles To Be Cut.
  • Spark Deflector Provides Safety And Clear Line Of Sight For Cutting.
Check Stock

Zippity Outdoor Products ZP19028 Unassembled Madison Vinyl Gate Kit with Fence Wings, White

  • DIMENSIONS: The entire gate kit with wings spans 61-3/8in. Gate without wings is 36-7/8in. Gate must be installed with wings for optimal stability.
  • FENCE COMPATIBILITY: Designed for the Madison Vinyl Fence (item ZP19067).
  • GREEN INITIATIVE: We are proud to announce that our vinyl is made up of recycled PVC that is reprocessed, reinforced, and repurposed, reducing the carbon footprint to then create the cutting-edge designs Zippity Outdoor Products are known for while helping to sustain a greener environment..
  • INSTALLATION: To install, dig holes and secure the extended posts into the ground.
  • use gravel or concrete for extra stability (optional).
  • WHAT'S INCLUDED: Kit includes small stainless latch (1), hinges (2), supporting posts (2), decorative fence wings with posts (2) and post caps (6).
Check Stock

The End: Fuck Christmas

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

ReciProMate - Reciprocating Saw Guide For Cutting 6 x 6 Fence and Deck Posts

  • New saw guide for cutting of 6 x 6, 5 x 5, 4 x 4 posts at level on New or Existing posts.
  • Sold in Non Retail package for Internet Sales Only.
Check Stock

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a met....
Check Stock

GALAX PRO 12A 5500RPM Corded Circular Saw with 7-1/4 Circular Saw Blade and Laser Guide Max Cutting Depth 2.45 90° 1.81 45° for Wood and Log Cutting

  • Efficient and powerful motor: 12 Amps powerful pure copper motor windings, this circular saw can deliver full-size performance at 5,500 rpm to cut....
  • Adjusting depth of cutting and bevel angel: A depth fast and accurate adjustment lever allows for adjustment of the saw's base plate. Maximum cutting....
  • Laser and rip fence: An adjustable fence for thinner cuts, with graduated ruler markings on the base and fence. The integrated adjustable laser allows....
  • Lightweight saw: Only 7.1 lbs. and reduce your fatigue. Dust extraction facility for maintaining a clean work area and keeps the cut line free of dust....
  • What you get: 1 x circular saw, 1 x 24-teeth TCT blade, 1 x 48-teeth TCT bladerip guide, 1 x hex key, warranty card.
Check Stock

Bosch Parts 2608040070 Rotary Handle

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand..
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common..
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence..
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks..
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instru....
Check Stock

DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw

  • NO MORE GUESSING: The DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw.
  • Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately.
  • Easily taper table legs or use for construction and remodeling.
  • VARIOUS TAPERS APPLICATIONS: Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts.
  • The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches (length of jig legs).
  • ACCURATE MEASUREMENT: Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper.
  • Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper.
  • EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the ....
Check Stock

Rousseau 3509 9-Inch x 12-Inch x 3/8-Inch Deluxe Router Base Plate

  • LESS BOARD STRUGGLE: The Smart Cut Aluminum Table Fence universally attaches to any saw or stand (not included) giving you a flush fit to your saw....
  • COMPACT & LIGHTWEIGHT: The aluminum Table Fence is very lightweight, extremely portable, and jobsite tough. Our products are heavy-duty, yet fast and....
  • EASY & SMART DESIGN: Quickly allows you to shift table lengths left and/or right of the saw. Use your own tape with the Measuring System, and you....
  • FAST & ACCURATE CUTTING: Cutting trim or multiple boards to specific lengths takes time. You will spend half your time at the saw, so you can spend....
  • SATISFACTION GUARANTEED: Made in the USA and Veteran Owned, we are confident you will love our products. We are committed to providing the highest....
Check Stock

Bosch Js365 Jigsaw Top Hndl 6.5A

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

Towallmark Table Saw, 10 Inch 15A Multifunctional Saw with Stand & Push Stick, 90° Cross Cut & 0-45° Bevel Cut, 5000RPM, Adjustable Blade Height for Woodworking

  • [BEVEL ANGLE and HEIGHT ADJUSTMENT] The blade height can be adjusted to meet your specific cutting needs with hand wheel. This table saw has a rack and pinion bevel control that provides 90°cross cutting and 0-45°bevel cutting..
  • [REMARKABLE CUTTING PERFORMANCE] Towallmark portable table saw features with high-quality 15 Amp motor, which can achieve 5000 RPM cutting performance, easy to cut all kinds of hardwood. And triangle supports at the back of the metal stand improves the stability of the table saw. Besides, extensions on both sides of the table top also allows it to handle a larger piece of wood more stably..
  • [PORT FOR DUST COLLECTOR] Towallmark table saw is designed with port for connecting dust collector at the back, which can help create a cleaner working environment. And it is also designed with storage part at the left and right sides for storing wrenches and push stick when they are not in use..
  • [Safety Design] The table saw has a transparent blade guard which can provide a clear view and prevent hurt due to accidental touch. And it also comes with a push stick to enhance security during operation. Furthermore, On-off switch and overload protection are equipped for added safety..
  • [WHAT YOU GET] Towallmark Table Saw, 10-Inch 24-Tooth Carbide....
Check Stock