Top Hand held Angle Measurement Tool

Generic Aluminum Alloy Multi Angle Ruler Drill Guide Template Tool Ceramic Tile Hole Punch Locator Folding Ruler for DIY Carpenters Tilers Measuring, 6 fold, single section 17.5x2.5cm

  • ... the shape you want. Measuring objects of different shapes is fast and easy..
  • Time saving: Use a sliding ruler to quickly measure the angle and size, lock it, and then stick the ruler on the material you need to cut, quickly draw the size and cut, save your time and improve your work and productivity..
  • Accurate angle measurement tool: This angle tool is etched marks (inches and centimeters), which is very suitable for angle measurement. You can adjust the size to accurately mark the tiles. The metal protractor is a measurement and integrated hole positioning tool..
  • High-quality materials: This multi-angle measuring ruler is made of high-quality aluminum alloy, which will not break due to bending or rust, and is more durable and stronger than plastic..
Check Stock

GemRed Digital Level and Protractor, 2 in 1 Digital Angle Finder LCD Display, 10inch/270mm/360°Angle Gauge for Woodworking/Carpenter/Construction/DIY Tools (Black)

  • 【Accurate Data & 360°Measuring】 The GemRed level tool applies Absolute Angle Sensor , to ensure the accuracy of data up to ±0.15°, resolution is 0.05°. 360°measuring range to meet your production needs. Conversion between absolute measurement and relative measurement. Absolute measurement mode and relative measurement mode can switch freely according to demand.
  • 【2 in 1 & Easy Used】 The Angle Finder both measure the angle and level. Calculating quickly and accurately, it’s your good partner in woodworking, construction, mechanical work and life. ☆Easy to measure all kinds of angle and draw lines.Easy calibration and Zero setting. ☆V-notch end for checking 90° degree quickly..
  • 【Practical LCD Display】 ☆Backlit LCD Display:Large LCD display with backlight, means that you can read clearly even in a dim environment. ☆Analogue quadrant showing ☆Display always reads upright: no matter which way it is turned..
  • 【Locking & Holding Function】 ☆Locking Function: Good locking function could lock the measurement at any angle. ☆Holding Function:Display has a hold function to freeze movement for accuracy.If you want to use data holding function, you need to press the HOLD button rather than twist the knob..
Check Stock

3inch Air Cut Off Tool ,Angle Grinder Pneumatic Cutting Machine With 6-Pieces 3" Cutting Disc Set

  • Maximum rotary speed up to 20,000rpm, helps you to cut efficiently.
  • Speed Is easily controlled with an infinitely progressive throttled trigger control.
  • Die-cast aluminum body, air cutting tool is wear-resistant and anti-oxidative, fine workmanship keeps long service life.
  • The Tool’s hand-held and compact right-angle design provides flexibility in tight spaces for minimal user hand fatigue when operating..
  • Applications:including cutting, polishing and grinding,porting, weld breaking, deburring.
Check Stock

YIYATOO Aluminum Alloy 6-Sided Angle Measurement Tool Tile Tools with 5 -Hole Positioning Aperture for mark tile flooring bricks lumber laminate metal & more!

  • 【Aluminum alloy with laser engraving 】: Made of aluminum alloy with durable metal knobs and bolts, It`s more durable and quality than plastic one.....
  • 【Multiple applications】: this angle ruler came with six arms and the circular inserts， could do multiple things ，Just place onto your work....
  • 【Accurate angle measurement tool】: This Six-Sided Aluminum Alloy Angle Template Tool is Laser engraved markings(inches & centimeters) perfect for....
  • 【Portable & Easy to store】This Foldable Angle Ruler easily folded and carried to your next project, helps speed up the process of making those....
  • 【Great versatile gift】 A six-sided multi-angle ruler is a universal angle measurement template tool that provides brick, wood, tiles, flooring,....
Check Stock

Zircon 63266 StudSensor Edge

  • Locates the edge of wood or metal studs behind standard walls up to 3/4-Inch thick.
  • New Ready light indicates when calibration has completed successfully.
  • New Edge light indicates when the tool is over a stud edge.
  • Updated SpotLite Pointing System shines an arrow-shaped light on the wall to mark the target.
  • New ergonomic design can be comfortably held in either hand at any angle.
Check Stock

Huepar Digital Level Angle Gauge Mini Angle Finder Level Box with V-Groove Magnetic Base&Backlight LCD Bevel Gauge Inclinometer for Carpentry,Building, Automobile, Masonry -0-360°Fast Measurement AG01

  • ...ich can meet various working demands. This digital angle inclinometer provides convenience in woodworking, construction, machinery, telecommunications, automobile etc..
  • ✔️BACKLIGHT LCD DISPLAY & EASY-TO-READ: The Digital Angle Gauge has a large LCD display with backlight, which provides accurate, quick and clear measurements. Users can easily read the measurements even in dark environment. The backlight can be switched on and off freely. Also the Display will be inverted Automatically when the tool is upside down. In addition, this digital level tool will automatically turn off after 5 minutes of no operation to save battery..
  • ✔️MAGNETIC V-GROOVE BASE&EASY MARKING: With its powerful magnetic V-groove base at the bottom, this digital bevel gauge can easily and firmly attach to miter saw, band saw, table saw blades, metal poles and even round pipes. You can also use it on fences, tables, and other metal surfaces. Thanks to its strong magnet, there’s no need to worry about holding the tool in place while taking measurements. And the groove lines on the left and right sides are convenient for marking when measuring..
  • ✔️HOLD&ZERO FUNCTION: The current measurement value can be held on the display by short pressing the HOLD switch. The zero funct....
Check Stock

Digital Angle Finder, farway 2 in 1 Digital Protractor, 7Inch / 200mm Stainless Steel Digital Angle Ruler with LCD Display for Woodworking/Carpenter/Construction Tool (Battery Included)

  • ...and a protractor makes it easy to measure internal and external angles. Great gift for dads, men and women who work in woodworking, construction, engineering..
  • 【Stainless Steel Digital Protractor】The stainless steel material is hard and durable, which can prolong the service time of this protractor. Laser etched measurements offer clear reading and years' usage..
  • 【High Accuracy & 360° Measurement Measure Angles Tool】Accuracy of this digital angle gauge is ±0.3 degree. The ruler supports measurement between metric(mm) and imperial(inch), makes it can measure length (0~200 mm/0~7 inch) convenient and accurately.Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles..
  • 【Angle Finder with LCD Display & Locking Function】Angle Finder Protractor comes with a large easy-to-read LCD display. For read it easily, this woodworking tool could be locked at any angle,and has zeroing button to reset angle finder tool at any time. It also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement,the display could read up-side-down.The function of automatic shut-off after 6 min saves energy of the battery..
  • 【Easy Operation & Wide Application Angle Protra....
Check Stock

Angle Grinder Spanner Wrench 12 pcs Angle Grinder Flange Nuts with 2 pcs Spanner Angle Grinder Flange Replacement for Makita Ryobi Dewalt Milwaukee Craftsman

  • ★Return your hand-held power grinder to its full operating capacity with this angle grinder flange nut for 5/8.
  • ★14pcs include: 6 x inner angle grinder flange nuts, 6 x outer angle grinder flange nuts and 2 spanners.
  • ★The Angle Grinder Spanner wrench is approx. 5.5”/ 140mm length, and for the flange nut, the outer diameter is 0.55”/14mm, the inner diameter is....
  • ★The grinder angle spanner wrench flange nut kit is made of carbon steel, durable and stable.
  • ★NOTE: All grinders are different, all brands have different size grinders, look over your grinder and find the info on the tool, find the size for....
Check Stock

Gain Express Digital Protractor Angle Finder Level Inclinometer Magnetic V-Groove 0~360 Degree with Backlight

  • USEFUL 3-IN-1 DEVICE – This newest digital gadget features with protractor, angle finder and level in one measuring tool. Large and ultra clear....
  • WIDE APPLICATIONS – Great tool for automotive, wood & mechanical industries, machinery, medical fields and etc.
  • V GROOVE BASE – The V Groove base with strong magnets enables strong attachment over a curve or cylindrical magnetic surfaces such as metal pipeline....
  • CONVERTS ANGLE TO OTHER UNITS : Conversions between : 4 x 90˚ m/m : 1000mm/m, % : 100%, in/ft : 12in/ft. No more guessing or fuzzy conversion!.
  • ABSOLUTE & RELATIVE MEASUREMENT – The regular absolute measurement mode can only measure the angle against horizontal plane. This tool also features....
Check Stock

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

  • 2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
  • This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
  • Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
  • When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
  • TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
  • Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
  • PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
  • The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
  • Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
  • The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....
Check Stock

Aluminum Alloy Woodworking Square Size Measure Ruler, welltop 3D Mitre Angle Measuring Tool, Multifunctional 45/90 Degree Angle T Ruler Gauge, for Three Dimensional Items Measuring Timber, Pipes

  • ...0° angle, ten common angles to meet your different needs..
  • 【Tough & Durable Material】The 3D mitre angle measuring tool is made of high quality aluminum alloy material, high hardness, high toughness, non-toxic, rust-proof, durable and non-deformable, high-precision measurement and long life span. Compared with other plastic rulers, which is more durable and has higher accuracy..
  • 【High Measurement Accuracy】Superb carftsmanship, square marking gauge, fine polishing surface, comfortable in your hand, and easy to use. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree or 90 degree angles. The measurement accuracy is 1mm. It can help you to improve working efficiency and save time with woodworking projects..
  • 【Clear Scale】The multi-functional angle ruler with clear engraving metric scales, is easy to read and elegant in appearance. Compared with other plastic rulers, it is more accurate. The maximum measuring range is 155mm. Suitables for household woodworking DIY, very convenient to use and carry..
Check Stock

DIDUEMEN Handheld Without Debugging Tungsten Electrode Sharpener TIG Welding Rotary Tool with Flat Grinding Block Cut-Off Slot Multi-Angle & Offsets

  • Caution: When using this tool, please wear a mask and other protective gear..
  • Miniaturization and High Performance：This tungsten sharpening grinder is a hand-held tool. It is small enough to fit on the TIG table, saving the....
  • Simple and Convenient Operation: Unlike the single-head configuration, this tungsten grinding machine does not require installation and debugging.....
  • 4 Size Brass Tungsten Guide Rails and Four-angle Screw Holes: The tool has four copper tungsten guide rails: 0 / 40 inch, 1 / 16 inch, 3 / 32 inch and....
  • Cut-Off Slot and Rotary Tool : Tungsten sharpening tool also has tungsten cut-off port processing. After the tungsten you are using is worn or....
Check Stock