Top Hard Drive Bracket 5 25

Seaocloud 5.25 Trayless Mobile Rack CD-ROM 3.5 inch Internal SATA Hard Drive Adapter

Fits 3.5 inch SATA hard drives in a front-accessible 5.25 inch PC drive bay without capacity limitations.
Tool-free mounting process, just lock your 3.5" hard drive in, mount in your 5.25" CD/DVD drive bay, and connect through SATA interface..

It fits for PC Case which CD-ROM Slot Inwall is flat, or Bracket Installation Type CD-ROM Slot, Some PC case special design may not support this Hard Drive Rack, then you can only DIY your PC Case or use it External, please note before buying.
Heat Dissipation:With 1x 12cm cooling fan Install slot space.Can help heat dissipation and would not easily get out of shape, protecting your hard disk effectively.
Perfectly fitting with the optical drive bay, accurately locating the site of case, hard drive and screw hole, easily expanding storage capacity..
Holding 5x 3.5 With Cooling Fan Install Lock space. Hard Drive Cage Drawer Rack Bracket.
Package included: (Fan and Hard Drive are not included) 1 set x HDD Hard Drive Cage Rack..

You can use it for 2 drives,2.5" SSD and 3.5" HDD.Allow to mount a 3.5 inch drive and a 2.5 inch drive (or a 8cm fan) to a 5.25 inch drive bay in your computer case at the same time..
Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive)..
Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk..
Mounting the 2.5'' drive firstly when you mount 3.5'' drive and 2.5'' drive at the same time,you can mount 8cm fan at the back if not mount 2.5'' hard disk..
Made of plastic body,quick and easy installation.

You can use it for 1 drive,2.5" SSD or 3.5" HDD.Supports computer cases with an available 5.25 inch drive bay.
allow to Mount 1x 3.5 - inch （or 2.5 inch or SSD）Drive and 1x 12cm fan..
Above Install hard disk , below install the fan. Make sure the hard disk high speed read and extend drive life..
when you install a fan, it will account more than a optical drive..
This adapter can adapts any 2.5" or 3.5" form factor drive to 5.25" drive tray..
Dimension 145 x 120 x 8mm(L x W x H)/ approx. 5.71 x 4.72 x 0.31 inch..

2.5" To 3.5" - 2.5" To 3.5" Mounting Adapter Bracket SSD Caddy, Support 2.5" hard drives (SSD and HDD) of laptop, compatible with SATA I, SATA II, SATA III..
SCREWS INCLUDED- 16 pcs(8pcs per adapter) screws included for each 2.5 to 3.5 bracket to ensure you can mount the bracket onto the PC case. 4 screw holes are designed on the SSD Bracket Mounting Adapter Bracket, which precisely corresponds to the 4 screw holes on the hard drive..
Easy to install 2.5" to 3.5" mounting adapter bracket. Suitable for HDD/SSD.
Metal Material- Our ssd mounting bracket is made of metal,which could strengthen the heat-sinking capability, so provides your hard drive a full protection..
Package Include: 2 x ssd mounting bracket 2.5 to 3.5 , 16x Screw.

Metal Material- Our ssd adapter 2.5 to 3.5 is made of metal,which could strengthen the heat-sinking capability, so provides your hard drive a full protection..
2.5 to 3.5 Adapter - 2.5" To 3.5" Mounting Adapter Bracket SSD Caddy, Support 2.5" hard drives (SSD and HDD) of laptop, compatible with SATA I, SATA II, SATA III..
PRECISE FIT- 4 screw holes are designed on the ssd bracket, which precisely corresponds to the 4 screw holes on the hard drive..
SCREWS INCLUDED- 16 pcs(8pcs per adapter) screws included for each 2.5 to 3.5 bracket to ensure you can mount the bracket onto the PC case..
Package Include: 2 x ssd mounting bracket 2.5 to 3.5 , 16x Screw, 5pcs colorful Reusable Cord Organizer.

Major Branded Hard Drive (Seagate, Toshiba, Hitachi, Fujitsu, WD) – with 1 Year Warranty With Bipra Limited.
Comes with PlayStation 3 Slim Hard Drive Mounting Bracket Separately ready to install the hard drive.
Just Install the Drive into the Mounting Bracket with the Screws Provided.
Quick and Easy Installation upgrade for your PS3 Slimline.

Hot swap up to four 3.5" SATA or SAS hard drives using three 5.25" bays.
4 Bay 3.5" SATA SAS Backplane with trayless design.
Hot Swap Mobile Rack for three 5.25" bays, supports SAS I/II and SATA I/II/III (up to 6Gbps).
4 bay mobile rack with durable plastic and aluminum construction provides a cost-effective solution for drive maintenance and hot swapping drives....
2 fans and venting to optimize heat dissipation / HDD Rack/ SAS Backplane/ SATA Backplane / hard drive tray / 4-bay SAS/SATA backplane / Hard drive....

2022 New Chipset, 2 Year Warranty from Mediasonic Store. Previous model ASIN: B003X26VV4.
Support all brand of 3.5″ SATA 1 / 2 / 3 hard disk drive up to 18TB per drive, and up to 4 x 18TB.
Support SATA 3 6.0Gbps hard drive transfer rate..
Transfer rate up to 5.0Gbps via USB 3.0, Transfer rate up to 6.0Gbps via eSATA.
Support 2.5” SATA SSD / HDD up to 12TB (Bracket Adapter required, not included in the package, sold separately).

Support all brand of 3.5" SATA I / II / III hard disk drive up to 14TB per drive, and up to 4 x 14TB.
Support SATA 3 6.0Gbps hard drive transfer rate..
Transfer rate up to 5.0Gbps via USB 3.0, Transfer rate up to 6.0Gbps via eSATA.
Support 2.5” SATA SSD / HDD (Bracket Adapter required, not included in the package, sold separately).
Thermal Sensor Built-in, Auto and Manual mode, and ONE Button interface selection to switch USB 3.0 or eSATA.