Top Hard Drive Cover Screws

Seagate 6 TB 3.5' Internal Hard Drive ST6000NM0044

  • HIGH-DENSITY STORAGE - 6TB hard disk drive designed for Hyperscale applications/cloud data centers solutions requiring maximum storage efficiency. 3.5-inch form factor for space-constrained data centers. FAST DATA ACCESS - 6Gb/s SATA for high data integrity, scalability and fast data access..
  • ULTIMATE PERFORMANCE - Robust performance with dual processors, ramp load technology, top-cover-attached motor and humidity sensor for optimum performance in all chassis..
  • HIGHEST-RELIABILITY - The industry’s highest-reliability 7200-RPM drive, designed for 24×7 operation with MTBF of 2.0M hours and AFR of 0.44%..
  • Bare Drive Only, Single Pack, (No Screws, Cables or Accessories included) -Friendly Reminder- Please FORMAT HDD on system in order to be detected/shows on system..
  • 3 Years Warranty from Reseller, Worry Free Return! 100% Full Refund. Works for Desktop PC/Mac, RAID System, NAS Network Storage, CCTV DVR Surveillance System.
Check Stock

Quartet trade Hard Drive Cover for Sony Playstation 4 PS4 Slim CUH-2015A

  • Supported models : Sony Playstation 4 PS4 Slim.
  • Package Include : 1 x PS4 Slim Hard Drive Slot Cover.
  • Replace your damaged or defective hard drive slot cover..
  • Makes your hard drive slot cover look new all the time..
Check Stock

Baoblaze Compatible Screw & Washer Set for Sony Playstation 4 PS4 Hard Drive Caddy

  • Perfect fix and combine your PS4 hard drive caddy , make it work again as new..
  • One complete set includes: 1pc silver screw, 4pcs gold screws, 4pcs rubber washers..
  • Our replacement hardware repair screw kit can replace your lost or stripped screws.internal support..
Check Stock

ORICO 3.5 Hard Drive Enclosure 5Gbps Tool Free Transparent Computer External Hard Drive Enclosure for 3.5/2.5 SSD/HDD Up to 16TB-3139U3

  • ✔[3.5 inch External Hard Drive Enclosure] — ORICO usb3.0 enclosure can support all 2.5inch 3.5inch SATA II/II/I SSD HDD up to 18TB for any brand and a 3.5inch drive enclosure can protects your hard drive away from sreatches and provides the hard drive a safe and dry environment to protect the data you cherish.
  • ✔[Clear USB 3.0 Enclosure] — Made by high quality PC transparent board without any impurities in the hard drive enclosure 3.5 to make the whole case cool and clear, the transparent design of the 3.5 hdd hard drive enclosure can helps you to monitoring the hard disk working status easily and distinguish the data you want to with no need to open the enclosure cover.
  • ✔[5Gbps Fast Transmission Rate] — Adopt SATA Revision 3.0 5Gbps bridge solution that meanwhile the usb hard drive enclosure 3.5 support UASP accelerated transmission protocol and TRIM acceleration command which optimize CPU usage, greatly improve hard disk transfer efficiency. The usb3.1 sata enclosure also backwards with USB2.0 and USB1.1 port.
  • ✔[Widely Compatibility] — The 3.5 usb external hard drive enclosure can support Windows, Linux and Mac OS operation systems and also a good helper when connecting TV, laptops, computers, PS4, XBOX One and so on, ideal tools when p....
Check Stock

Cuifati 2.5in Hard Drive Enclosure, 5Gbps Transmission External HDD Case Adapter Supports for Windows,for Linux,for OS X 8.0

  • 5Gbps: The maximum transmission rate of 2.5in hard drive enclosure is 5Gbps, which is fast, and the hard drive enclosure can support UASP accelerated transmission protocol, which greatly improves the storage or backup efficiency of the device..
  • Scratch Resistant: Hard drive Enclosure preserves hard drives from external scratches and makes SATA hard drives easy for data storage..
  • Support System: External HDD case adapter supports for Windows,for LINUX,for OS X 8.0 and above. Designed for 2.5in 7mm/9.5mm SATA HDDs and SSDs up to 2TB..
  • Plug and Play: HDD enclosure tool free installation, no driver required, just push out the cover, insert the drive, close the cover, support hot swap, no additional power supply required..
  • Wide Compatibility: USB3.0 hard drive enclosure can easily connect 2.5in SSD and HDD to PC,Laptop for data transfer or expand storage..
Check Stock

Motion Pro 90 Degree 1/4" Hex Driver Carb Tool - With Bits

  • Motion Pro carburetor tool 90 degree 1/4" hex driver. This is a 17.5" long 1/4" driver tool with a 90 degree bend on the end so you can reach in and adjust hard to reach adjustment screws on motorcycle carburetors. This is a very versatile tool, it can be used with any 6mm or 1/4" hex bits!.
  • Designed for hard-to-reach areas and air/fuel mixture screws on multi-cylinder motorcycles.
  • Gear driven 1/4 in. hex drive. Includes five 1/4 in. hex drive bits (all 1/2 in. long) - Straight-slot, Phillips, D-shaped air/fuel mixture screw bit, 6mm hex jet bit 1/4 in.-hex-to-1/4 in.-drive bit..
  • Can be used with any 1/4 in. or 6mm hex bits. Max torque is 60 in. lbs. 17.5 in. long..
Check Stock

Cuifati 2.5in Hard Drive Enclosure, 5Gbps 2.5in Hard Drive Enclosure External HDD Case Adapter for Windows,for Linux,for OS X 8.0

  • Fast Transfer: The maximum transmission rate of 2.5in hard drive enclosure is 5Gbps, which is fast, and the hard drive enclosure can support UASP accelerated transmission protocol, which greatly improves the storage or backup efficiency of the device..
  • Good Protection: Hard drive Enclosure preserves hard drives from external scratches and makes SATA hard drives easy for data storage..
  • Support System: External HDD case adapter supports for Windows,for LINUX,for OS X 8.0 and above. Designed for 2.5in 7mm/9.5mm SATA HDDs and SSDs up to 2TB..
  • Easy to Use: HDD enclosure tool free installation, no driver required, just push out the cover, insert the drive, close the cover, support hot swap, no additional power supply required..
  • Wide Compatibility: USB3.1 hard drive enclosure can easily connect 2.5in SSD and HDD to PC,Laptop for data transfer or expand storage..
Check Stock

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

  • 2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
  • Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
  • Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
  • Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
  • Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..
Check Stock

Nimitz 2nd HDD SSD Hard Drive Caddy for Hp Elitebook 8560p 8570p with Faceplate/Bezel

  • Add a 2nd drive to your laptop by replacing your optical drive.
  • Comes with matched Faceplate/Bezel and mounting bracket,fits perfectly.
  • Works in optical drive bay of HP Elitebook 8560p 8570p.
  • Accepts 2.5″, 12.5mm-high SATA hard drives or less,Also compatible with 2.5″ SSD.
  • The hard drive attaches to the caddy from the side using long screws( 3rd picture).
Check Stock

ZXUY Hard Drive SATA 2nd HDD Caddy Tray for Unibody 9.5mm Laptop CD/DVD-ROM Drive Slot (Replacement Only for SSD and HDD)

  • It can be made part of RAID array and Bootable.Plug & Play, Supports hot swapping.
  • Compatible with: 2.5"/9.5mm SATA HDD or SSD, Hard drive NOT include.100% Brand New 9.5 mm-thick caddy..
  • Package Content: 1x 2nd HDD Caddy ， 4x Hard Drive Screws and 1pcs screw driver.
  • Fully integrated into laptop, no cables/PSU/software driver needed.Fast & Reliable connection in laptop, just as the primary HDD.
  • High performance SATA hard drive providing up to 500GB of additional internal hard drive space..
Check Stock

SSD Bracket 2.5 to 3.5 Adapter 2Pack, Hftywy SSD Mounting Bracket Kit 2.5 to 3.5 SSD HDD Hard Disk Drive Bays Holder Metal Mounting Bracket Adapter with Screws for PC SSD

  • ★ 2.5 to 3.5 Hard Drive Adapter SSD Bracket Converts 2.5" Notebook Hard Drive to 3.5" Desktop Hard Drive Bay Mounting Bracket Adapter.
  • ★Precise Fit- 4 screw holes are designed on the Mounting Adapter Bracket, which precisely corresponds to the 4 screw holes on the hard drive..
  • ★Specifically designed for SSD drives. Optimise your PC performance and make the most of the internal space inside your PC..
  • ★Using precision die stamping, great assemblability, easy to install. 2mm thickened metal, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
  • ★Package includes 2Pack of Hard Drive Holder, and 1 x screw driver and all screws needed..
Check Stock

MACHINIST 2.5'' SATA HDD SSD Enclosure Hard Drive Caddy Case, 12.7mm SATA to SATA Hard Drive Adapter for 12.7mm Laptop CD/DVD-ROM Optical Bay Drive Slot Aluminum Case

  • ... most brands and models of laptops, support 2.5″ HDD, SATA, SATA II, SDD, suitable for Samsung Evo, for SanDisk, for Kingdian, for Crucian MX, for WD for Western Digital, for Seagate, for Kingston, for OCZ Vector, for Drevo, Intenso, for HyperX, etc..
  • Trouble-free installation: There comes with 1 screwdriver and 4 screws for DIY installing, and the detailed installation steps are on the surface of the second HDD/SSD, just follow it to replace the optical drive to quickly upgrade the computer..
  • Package Includes : 1 x Hard Drive Caddy 1 x Screwdriver 4 x Screws If you have any questions or suggestions, please contact me, I will contact you within 24 hours and provide quality service.
Check Stock