Top Hardened Sleeve

Kipp 03093-002903 Stainless Steel Indexing Plungers Without Collar, G Style, Locking Pin Not Hardened, M6 x 0.75 Thread, 34.5 mm Length

  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305.
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground.
  • Mushroom knob in anthracite gray thermoplastic.
Check Stock

Kipp 03093-11903 Stainless Steel Indexing Plungers Without Collar, G Style, Locking Pin Not Hardened, M6 x 0.75 Thread, 31.5 mm Length

  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305.
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground.
  • Mushroom knob in anthracite gray thermoplastic.
Check Stock

Kipp 03093-201105 Stainless Steel Indexing Plungers Without Collar and Extended Locking Pin, G Style, Locking Pin Hardened, M10 x 1 Thread, 46.5 mm Length

  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305.
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground.
  • Mushroom knob in anthracite gray thermoplastic.
Check Stock

Kipp 03093-201412AO Stainless Steel Indexing Plungers Without Collar and Extended Locking Pin, G Style, Locking Pin Hardened, Inch, 3/4-16 Thread, 84 mm Length

  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305.
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground.
  • Mushroom knob in anthracite gray thermoplastic.
Check Stock

Jacobs Chuck 31052D Professional Duty Chuck, 1/2-20 Mount, 0.5' Maximum Capacity, 1-23/32' Diameter x 3' Closed Length

  • Through hardened jaws provide hard, durable gripping surfaces.
  • One piece sleeve eliminates crack between driving teeth often found in other designs.
  • Each chuck 100 percent inspected for performance and precision.
Check Stock

Fowler 52-224-103-0, Digit Counter Micrometer Set With 0-3' Measuring Range

  • Digit Micrometer: Digit display has 0.001" graduations with a resolution of 0.0001" on the sleeve and an accuracy of 0.00016" (0-1” unit) for precise readings.
  • Accurate Readings: Outside micrometer set has a 0" to 3" measuring range and flat anvil/spindle pair with 0.256" diameter measuring faces for general purpose measuring.
  • Optimum Performance: Hardened, ground and lapped spindle thread provides smooth movement, accuracy, and long life.
  • ratchet stop provides a constant force for repeatability between users.
  • Durable Construction: Features thermal insulated frame.
  • blue baked-enamel frame provides durability and is heat-insulated to reduce temperature-related expansion or contraction for more accurate measurements.
  • Set includes: The digit micrometer set includes 0 to 1", 1 to 2" and 2 to 3", standard micrometers, a spanner wrench, and a shop hardened case for storage.
Check Stock

GEDORE 620 H-2000 Club Hammer ROTBAND-Plus, 2000 g

  • Contoured ash (620 E) or hickory handle (620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve.
  • The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit.
  • GEDORE stands for a universal, comprehensive offer of high-end tools, special tools. The GEDORE quality promise is based on 100 years of forging competence..
  • The closest attention is paid to every single detail of every single GEDORE tool: qualified staff, intelligent construction, first-class materials and modern production methods..
Check Stock

MotoAlliance Impact Implements Pro Disc Plow/Harrow for ATV/UTV with 2" Receivers

  • Eight (8), 12" notched, hardened steel cutter disc blades provide 54" of cutting width.
  • Features a stable axle with two (2) heavy duty roller bearings per axle.
  • Easy, one (1) pin mounting with the included pin.
  • Requires Pro 1-Point Lift System, Sleeve Hitch Adapter or CAT-0 hitch (sold separately) for attaching to ATV/UTV and Lawn Tractors.
Check Stock

Bestauto 3/4NPT Hydraulic Quick Connect 3/4body Hydraulic Coupler 20.7MPa Hydraulic Coupling Quick Connect 106L/min Hydraulic Quick Coupler (ISO 16028)

  • ... sleeve locking mechanism (with 3/4" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
  • Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
  • Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
  • High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged with most types of skid steers loaders, such as Bobcat, John Deere, CAT, Case / New Holland, Kubota, and many others..
Check Stock

Master Lock - (3) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-3

  • ...e shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. KEY RETAINING - ensures that padlock is not left unlocked..
  • PADLOCK FEATURES: 1-9/16"(21mm) wide x 3"(76mm) high. Armored Shackle Guard blocks bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing. Removable shackle sleeve. Sleeve off - Secures coupler latches to accommodate openings 9/32" (7mm) in diameter. Sleeve on - Works best with hasps, fits openings 1/2" (13mm) in diameter or larger. Precision pin tumbler mechanism resists picking..
  • IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches that are wider than 7/8..
  • ATTENTION: If you order two 3-packs they will NOT necessarily be keyed the same. To ensure you get two 3-packs keyed alike, you must order the 6-pack..
Check Stock

OKG Noose Security Chain - 3.6 ft x 23/64” Thick Heavy Duty Chain - 9mm Hardened Alloy Steel Cut Proof Chain - Premium Anti Theft Lock Chain -Ideal for Motorcycles, Trailers, Bikes, Mopeds, Generators

  • ✓ PREMIUM QUALITY SECURITY CHAIN - Robust and very sturdy cut proof chain is triple heat treatment hardened. Length 3.6 feet, weight 5.5 lbs with 10mm diameter chain links anti bolt cutter, anti angle grinder. High-quality automatic welding process is flat and smooth and the square hardened chain is made of specially tempered steel..
  • ✓ SPECIAL O-RING NOOSE LOCK CHAIN DESIGN - OKG ultra security square chain is different from the round cut proof chain or normal security chain, Cinch ring design at the end can doubles the effective working length. Multifunction security locking method can maximize the value of anti theft security chain and be used for various security applications..
  • ✓ COMPLIANT WITH EN ISO 9227 & ISO 2639 STANDARDS – OKG heavy duty security noose chain is made of HI-TECH special alloy steel. Cut proof chain is hardened to 64 HRC (780 HV) and galvanized finish prevents rust and corrosion. OKG uncuttable chain is wrapped in a nylon sleeve and comes with a chain bag for easy carrying and storage..
  • ✓ 2020-2023 SOLD SECURE GOLD APPROVED ULTIMATE - Maximum security protective security lock chain. Super strong antitheft guard system motorcycle lock chain for city outdoor & personal or business property. Waterproof weatherproof no corro....
Check Stock

Master Lock - (4) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-4

  • ...s NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches that are wider than 7/8..
  • SPECIFICATIONS: 3/4" (19mm) Armored Shackle Guard helps block bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing..
Check Stock