Top Hardened Steel Tool

Titan Tools - External Deburrer 51950

  • 【Durable Hard Steel】 Made of extremely hard stainless steel with high strength and hardness for durability, anti-rust and anti-corrosion. It can....
  • 【Safe and Efficient】The high strength and hardness deburring external chamfer tool easily shave down the outer edges of a bolt, pipe or rod,....
  • 【Repair Damaged Threads】Hardened steel external deburring tool quickly repairs damaged threads on steel bolts including stainless steel and....
  • 【Simple Operation】Attaching the deburring external chamfer tool to the end of your power drill, Use the lowest speed on the drill bit, and then....
  • 【Widely Used】Compact size, you can carry the eliminate damaged extractor in your tool pouch and make hot forming tool. Fits size(approx.): 5/16″....
Check Stock

Floor Lifter Tile Removal Tool Hardened Steel Pry Bar Designed for Removal Lifting Scraping Prying Nails Pulling and More Premium & Durable Black & Red

  • 【LABOR-SAVING OPERATION】The trim puller is equipped with a non-slip EDPM rubber handle making the trim removal tool more comfortable to use than....
  • 【NO DAMAGE】The baseboard trim removal tool has a large, flatter, and wider contact area that can disperse the force without damaging the wall. Our....
  • 【INNOVATIVE DESIGN】The baseboard removal tool equipped with a noise-reducing felt cloth cover to reduce the noise caused by the martinez hammer....
  • 【HARDENED STEEL】The trim puller tool for baseboard is made of 48Rc hardened steel which is heated to temperature up to 900℃ for developing the....
  • 【MULTIFUNCTIONAL TRIM PULLER】The trim removal tool has a 15-degree wedge-shaped center, which helps separate the trim and baseboards. The Luvrd....
Check Stock

Johnson Level & Tool 116 Plumb Bob, 16 oz., Brass Finish, 1 Pack

  • PLUMB BOB: This plumb bob is used by foundation contractors, excavation contractors and surveyors for lining up, transferring points or establishing a straight vertical or plumb line by connecting it with a string..
  • PRACTICAL DESIGN: The plump bob tool has a practical design with a hardened steel tip to ensure accurate measurements. It also improves the work quality along with maximum efficiency and safety..
  • QUALITY MATERIAL: This steel tip plumb bob features a brass-plated body that adds to its durability and great performance. It also has a lacquer finish, which protects it against corrosion while adding to the lifespan..
  • EASY INSTALLATION: The brass plumb bob tool has a hardened steel tip and cap that can be removed and replaced easily to offer a quick installation of a string or line..
  • PRODUCT SPECIFICATION: Johnson steel plumb bob weighs 16 oz. and is ideal for a variety of indoor and outdoor applications, including carpentry, masonry, surveying and fencing..
Check Stock

Midwest Tool and Cutlery MWT-TND Trim Nail Driver

  • Hardened Steel Punch For Long-Lasting Durability.
  • This product is manufactured in United States.
  • Drives trim nails into soffit, fascia and other finishing trim.
  • Will not cause denting or damaging to the material.
  • Durable hardened steel driver and copper coated steel ball for free, easy action.
  • Hex shape provides secure grip and keeps tool from rolling away when laid down..
Check Stock

Trim Puller Tool for Baseboard,Wood Trim Removal Tool for Floor Tile,Molding,Flooring,Siding, Trim Puller with 2PCS Noise Reduction Cover

  • 【HARDENED STEEL TRIM PULLER TOOL】This Baseboard Removal Tool is made of hardened High-strength forged steel, Black matt coating, anti- rust and corrosion,can resist repeated heavy leverage well..
  • 【LABOR-SAVING DESIGN 】 The trim puller tool for baseboard is with sharp edge can be easily driven into the seam of tiles ,baseboards and flooring without damaging the walls and floor, 15 degree wedged center design enables your removal work more efficiently.it can competent with the work of the crowbar, trim bar and wrecking bar..
  • 【Ergonomic Handle】The trim puller is molded with EDPM rubber handle, anti-slip pattern design provides exceptional shock-absorbing , prolonged handle easy to grip , time and strength saving..
  • 【MULTI-USE TOOL】This Tile Removal Tool with nail puller is Multi-function home improvement tool can be widely used in removing molding,door window decorative Panel ,carpet tack strip, glued countertops and other home renovation work..
  • 【NOISE REDUCTION COVER】The trim removal tool equipped with 2pcs noise reduction cover ,which protect you from hearing hurts specailly when you work long time in tile removal,molding trim ,kitchen remold or other home improvement work..
Check Stock

Narex Cabinet Scraper Burnisher with Stained Hornbeam Handle 872401

  • This burnisher is the perfect tool for putting the small hook on cabinet scrapers.
  • Burnisher has a stained Hornbeam handle, brass ferrule and highly polished hardened high carbon steel rod.
  • Polished high carbon steel rod 3/8" diameter and 6" long hardened to Rockewll 62-64..
  • Stained Hornbeam handle 6 inches long by 1 1/2 inches in diameter ..
Check Stock

Starrett Air-Hardened A2 Tool Steel Flat Stock, Precision Ground, Standard Tolerance, ASTM A681, 1 1/2\ Width, 1/8\ Thick, 18\ Length

  • Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
  • This steel can be carburized or case hardened After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
  • The Starrett Company uses its own ground flat stock for many of its precision tool parts.
  • Full-length identification eliminates confusion with other steels.
  • Starrett A2 Tool Steel precision ground flat stock is a 20 carbon fine-grained, killed steel, which can be carburized or case hardened very similar to AISI 1018.
Check Stock

iCrimp Wire Rope Swager for Crimping Fishing Lines Up To 2.2mm

  • Hardened Steel / Black Oxidation Jaws: iCrimp Fishing Crimping Tool used high-quality carbon steel to support the jaws hardness.After black oxidation treatment on the surface form a dense layer of oxide film so you do not have to worry about it will be preserved by sea water corrosion or occasional inappropriate and rust.
  • 4 Crimping Positions and 2 Hardened Side Cutters:The 4 crimping positions include:0.5-0.1mm, 0.1-0.5mm, 1.0-2.0mm, 2.2mm.It can easy crimp copper / aluminum sleeve and more from 50-450 lb test line.
  • 2 Hardened Side Cutters and Loaded Spring Handle: The 2 hardened steel side cutters work with the spring which loaded handle.It help you cut the wire / monofilament without frays and the strong spring open the cutters instead by your hands.
  • Cushioned non-slip grips and Feature a Safety lock: The stainless grips wrapped with the non-slip cushioned and comes with a safety lanyard.The safety lock is easy way to keep you crimper close.
  • Better Quality:Hassle-free money back for non-artificial damage. Fishing promises 100% satisfaction to our every customers.
Check Stock

ZLKSKER 8 Inch Adjustable Lockable Steel Wing Divider, Leather Compass for Woodworking & Leather Craft, Marking & Scribe Tool

  • Hardened and tempered Bow springs and fulcrum spools to assure uniform tension without any play. Made of quality tool steel..
  • These are useful measurement transfer tool(s) for uneven surfaces, great for a variety of uses such as tracing contours and scribing circles into metal.
  • The forged steel legs feature hardened points for precise marking of the work piece.
  • An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment.
  • Frequently used in conjunction with other rulers for the most accurate measurement transfer.
  • Sizes in 4" (100 mm )- Comes as a Set of Insider, Outside & Divider Calipers.
Check Stock

Fongmore 10 Inches Heavy Duty High Leverage Coaxial Cable Cutter Wire Cutter, Cable Aluminum and Copper Cabling Cutter

  • Easy to cut up to 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable with our expertly induction-hardened high-carbon steel cutting edges, Not for steel or ACSR..
  • Made of durable Chrome-Moly steel, these cable cutters feature precision-machined knife and anvil style cutting blades with a low profile design that makes this the perfect tool for applications in confined areas..
  • The long handle of the wire crimper is 10 inch and wrapped with soft rubber, ergonomic lever structure design can increase friction and help you use less effort ..
  • You will get one piece cutter,Through-hardened (not case-hardened) for longer-lasting cutting surfaces..
Check Stock

The Best of Metal Blade, Vol. 2 [Vinyl]

  • EZARC oscillating saw blade with carbide teeth can easily handle the toughest metal applications with 30 × life vs Bi-Metal blades..
  • Upgrade carbide laser welding technology with a slim body makes the blades extremely strong and durable for heavy duty nails cutting..
  • Super endurance for hardened materials, e.g. stainless steel, hardened screws and nails, fiberglass and plasterboard boards, etc..
  • The 'MUST HAVE' caribe oscillating multi tool blades are designed for tough cutting jobs on hard material..
  • Our universal oscillating tool is suitable for professionals and DIYers. Two extra adapters fit most of the conventional oscillating tools on the market..
Check Stock

Real Avid Hammer & Punches + Smart Bench Block

  • ESSENTIAL GUNSMITHING TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and STANDARD PUNCHES Set paired up with innovative Smart Bench....
  • GUNSMITHING HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon.
  • STANDARD, FLAT TIP PIN PUNCHES FOR ANY GUN: hardened steel, nickel plated flat tip punches for driving out solid pins.
  • Includes 9/32, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 3/32, 5/64, 1/16" nickel-plated, hardened steel pin punches.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
Check Stock