Top Hardening Water Tank

GROW1 Collapsible Reservoir Water Tank 132 Gallon Water Storage Barrel Container Portable for Garden Plants Gardening Greenhouse

  • COLLAPSIBLE WATER TANK – GROW1 Collapsible Water Reservoir Tank is a compact and flexible water tank. The perfect water storage tank for gardening to store water..
  • LIGHTWEIGHT AND DURABLE – Made of long-lasting, durable PVC material, this lightweight water holding tank is able to withstand bad weather damage easily..
  • EASY STORAGE AND TRANSPORTATION – Thanks to a flexible design, the portable water tank folds flat for easy transportation and compact storage..
  • QUICK AND EASY SET-UP – No tools are required to assemble the water storage barrel. Assemble the water storage container in a couple of minutes. Store and move the water drum anywhere..
  • FEATURES A TAP AND VALVE FITTING – An ideal water tank for garden, water tank for greenhouse, also ideal for daily use. Water holder tank features a 3/4'' tap, valve fitting, and 3/4'' fill fitting..
Check Stock

PR Replacement Humidifier Water Chamber for System One 60 Series (Original version)

  • This is NOT compatible with the very similar 50 series line of machines also from Philips Respironics.
  • Do not fill the water tank above the maximum fill line. Damage to the humidifier or therapy device may occur. If the water tank is overfilled, water may leak out of the tank inlet (located on the back of the tank) when installing the tank lid. Use only room temperature distilled water in the tank. Do not put any chemicals or additives into the water. Possible airway irritation or damage to the water tank may result. Remove the tank, empty all water, and replace the empty tank before transporting.
Check Stock

3M 550 Polyurethane Adhesive

  • Polyurethane adhesive used as an elastic adhesive for paver caps, masonry veneer and faux stone.
  • PERFORMANCE: Fast hardening, waterproof and water immersible once dried. Can be used to fill in gaps and can be painted over water-based, oil-based, and rubber-based paints..
  • SUPPORTS: Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, and wood..
  • DURABILITY: Good weathering resistance. High durability and flexible..
  • USES: Can be used for net tile installation, floor moldings and door sills, lightweight construction materials, wood or metal window and door frames.
Check Stock

Custom Molded Orthotic Arch Support Insoles - Pain Relief Shoe Inserts for Flat Feet, Plantar Fasciitis, Pronation - Comfortable Orthotic Insoles for Men & Women - Ideal for Walking, Running & Hiking

  • ... the top as well as on the bottom, making them ideal for all athletics. Once activated, the shoe inserts for women can support up to 400 lbs all while remaining perfectly comfortable..
  • Customized fit: The heel cup contour layer of our shoe inserts for men forces the orthotic layer up into the arch of your foot while hardening to ensure a 100% customized fit. This in-shoe casting technique realigns your feet to their natural state which prevents overstretching of the plantar fascia and prevents overpronation during all kinds of outdoor activities..
  • Personalized orthotics in just 15 minutes: Using the provided syringe, inject a small amount of water through the water port on the back in order to activate the medical-grade composite orthotic that’ll mold itself to your feet’s size. Fifteen minutes after water activation, the composite layer of our shoe sole inserts hardens in the shoe and retains the shape of your foot permanently. NOTE: Water leaking around the edges of the orthotic is normal..
  • Instant relief from painful feet: Our custom orthotics are designed to provide effective relief against foot abnormalities such as foot pain, plantar fasciitis, abnormal pronation, foot/ankle arthritis, high arch, flat feet, achilles tendinitis, and shin splint....
Check Stock

Maichis 12V RV Tank Heater Pad 12\ x 18\

  • DURABLE STAINLESS-STEEL METAL TUBE: Campground water supplies vary, so a flushing tank is critical for every RV owner. And RV water heater anode rod will slowly disintegrate and leave calcium deposits and sediment as water is heated over time. This RV water heater flush wand is a must for cleaning your camper's hot water heater tank. Not only can it give the tank a longer life but it can also prevent sediment from clogging the water lines in the camper..
  • ADJUSTABLE METAL NOZZLE & POWERFUL WATER SPRAY: The metal tube water tank flusher can adjust the water flow by the user rotating the nozzle. The water outlet diameter is 1.5cm. Loosening the nozzle will form a "water column" spray, and tightening the nozzle will form a “shower” spray. With the nozzle removed, there are two large openings at the front of the wand. A powerful spray can be created to reach the bottom, top and sides of the tank for a complete cleaning..
  • EXQUISITE HANDLE: The rubber handle is not only ergonomic but also wear-resistant and durable. Both the frosted rubberized design and widened handle, and the stainless-steel spring and handle help protect your hands and make them more comfortable. Adjust the high flow or low flow through the valve as needed. Press and hold the water reg....
Check Stock

Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank

  • 75 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 50.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the US....
Check Stock

Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank

  • 65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 44.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the US....
Check Stock

Sika Anchorfix-2, Super Strength anchoring Adhesive, Two Component Anchor System for Threaded Bars in uncracked Concrete, 10.1 fl. Oz & Bosch HC2083 1\\/2 in. x 8 in. SDS-Plus Bulldog Rotary Hammer Bit

  • Product 1: Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive..
  • Product 1: SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock..
  • Product 1: USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems..
  • Product 1: PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces..
  • Product 2: Optimized brazing and hardening process for long life.
  • Product 2: 15 percent faster (compared to S4L).
  • Product 2: Bosch-made carbide tip is tougher and more durable under heavy loads.
  • Product 2: Proprietary Bosch hardening process results in more holes per bit.
Check Stock

Coodss Dry and Wet Mop Cleaning Head for Dyson V7 V8 V9 V10 V11 Wireless Vacuum Cleaner Accessories Electric Cleaning mop Head,Hardwood Floor Attachment

  • The Dual Spinning Mop head - attachment for Dyson vacuum cleaner V7 V8 V10 and V11 models, allowing you to vacuum and mop simultaneously. It have a water tank to wet floor mopping.Note: * Please add water to the open tank and rotate the valve above the tank to let the water out *. * Do not use this mop head on a flooded floor *.
  • Tough on Dirt - Spinning at a dizzying 160 RPM, the scrubbing mop head can easily cut through dirt and stubborn grime on your wood, vinyl and ceramic tile smooth floors.Note: * Please add water to the open tank and rotate the valve above the tank to let the water out *. * Do not use this mop head on a flooded floor *.
  • Efficient Cleaning – With a high powered dual spin motor, it cleans incredibly efficient up to 7-10 cubic meters per minute, saving your time and labor.Note: * Please add water to the open tank and rotate the valve above the tank to let the water out *. * Do not use this mop head on a flooded floor *.
  • Easy for Maintenance – Made of nanoscale nylon cloth, the washable mop pads are effective to collect dust and water without stains, streaks or marks on the floor.Note: * Please add wa....
Check Stock

Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the ....
Check Stock

White Butyl Tape 1/8 inch x 1 inch x 30 feet for RV/Mobile Home (Single Roll)

  • Commonly used on RV's & Mobile Homes for Installing or replacing windows, doors, vents & trim for a water tight seal..
  • Use on any overlapping metal seam for a water tight seal..
  • Tolerance of +- 1/32" Thickness and +- 1/16" Width.
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA i....
Check Stock