Top Hardware Auto Fittings

Class A Customs 18.5 Gallon RV Waste Black Water Holding Tank WT-1850

  • 18.5 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

HILLMASTER Heavy Duty Gate Latch Kit for Wooden Vinyl Fence, 1 Pack Self-Locking Gate Latch and 2 Pack 3.5” Spring Tee Hinges, Gate Fence Hardware Set, Black Finish

  • ...so be operated with a cord or wire, auto-close T-shaped spring gate hinge exclusive bearing design eliminates metal to metal contact, the maximum rotation angle is up to 270 degree, provide for smooth, quiet operation and remain dimensionally and structurally sound in hot and cold climates..
  • 【Practical】Our fence hardware kit suitable for outdoor wood gates, exterior wooden fence, vinyl gate, it can also be installed in aluminum alloy doors or metal gates(Tips: Please replace professional hard screws), Use on garden door, vegetable farm, orchard, backyard, deck, shed, ranch, pasture, pool gate, animal shelters, cabin, driveway gates, corral gates, barn door, utility door and so on..
  • 【Easy to Install】 Gate Hardware Kit include 2 Pack 3.5in spring tee hinges , pre-drilled with three countersunk holes arranged in a half moon shape. 1 Pack Gravity Self closing gate latch and 21pcs mounting screws, can be used for right-handed or left-handed applications for full or half surface installations. Comes with installation instructions and all mounting screws, no angle measure required..
  • 【Professional Guarantee】We are specialized in producing various hardware fittings, please go find all kinds of home hardware fittings you need in HILLMASTER store and e....
Check Stock

Auto Meter 4384 Ultra-Lite Mechanical Vacuum Gauge Regular, 2.3125 in.

  • Traditional incandescent lighting illuminates around the perimeter of the dial.
  • Auto Meter’s race proven mechanical instruments provide trusted accuracy while being simple to install.
  • No electrical system required for gauge operation - compatible with every street or race vehicle.
  • Mechanical movements provide accuracy and durability even in the harshest environments.
  • Gauge kit includes 1/8” nylon line, T-Fitting, vacuum fitting, compression fittings, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation.
Check Stock

Class A Customs 48 Gallon RV Waste Black Water Holding Tank 56 x 30 x 9 WT-4800

  • 48 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Auto Meter 4321 Ultra-Lite Mechanical Oil Pressure Gauge, Regular, 2.3125 in.

  • Traditional incandescent lighting illuminates around the perimeter of the dial.
  • Auto Meter’s race proven mechanical instruments provide trusted accuracy while being simple to install.
  • No electrical system required for gauge operation - compatible with every street or race vehicle.
  • Mechanical movements provide accuracy and durability even in the harshest environments.
  • Gauge kit includes 1/8” nylon line, 1/8” NPT compression fittings, 1/4” NPT adapter, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation.
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

Vacuum Reservoir Tank, with Hardware (Texture Black Steel)

  • Fabricated of strong lightweight aluminum.
  • Includes mounting hardware brackets and fittings.
  • Improves power brake vacuum due to performance cam shaft.
Check Stock

Spectre Performance 2518 Fuel Pressure Regulator

  • Adjustable through a pressure range of 1 psi to 4 psi.
  • 3/8 In. barb fittings and mounting hardware included.
  • Use with 2515 or 59013 fuel pressure gauge.
  • 3/8 inch barb fittings and mounting hardware included.
Check Stock

SavvyCraft 4 Bow Bimini Replacement Top Canvas Cover4 Bow 96\ L 54\-60\ W Black Color

  • *Upgraded Bimini Top Parts - Casting from marine grade 316stainless steel , this external eye ends for bimini top fittings works for 7/8'' OD round tubes. Upgraded outside eye ends that stands up over time is a perfect choice to replace your plastic, nylon or broken fittings..
  • *Heavy Duty Stainless Steel - Stainless eye ends are well-built and highly polished for ultimate using. They are corrosion resistant, anti-rust, providing more durable solution for salty water environment..
  • *Easy to Install - Marine boat fittings are easy to assemble and install.Simply assemble jaw slide with eye ends to join the bimini top frame, then tighten screws to secure the inserted poles in place..
  • *Durable Design - 7/8’’ external eye end has shining polished looking and smooth touch, combining the modern design . Bringing this marine hardware for your lovely bimini will definitely surprise you for its outstanding product experience..
  • *Choose Right Size - Fits for 7/8'' OD round tube. One screw on each fitting measured 1/4''. the detail size refer to the left picture.Perfect replacement for marine hardware, widely used for boating, kayak, canoe, yacht,etc..
Check Stock

50 Rubber Tobacco Pipe Tip Grips (Small)

  • ...ould be adjust to 19 sizes,10" is to 26 sizes,12" is to 31 sizes. plumbers and DIY homeowners: gripping, pulling, tightening & loosening nuts, bolts, pipe & fittings.
  • 【Service From WISEUP】WISEUP has been Founded for 20 Years Who is always Committed to Hardware Manual and Electric Tools,as well as Pneumatic Tools, Labor Insurance, Auto Repair, Decoration etc. Contact to us Before You Leave an Unhappy Message.We Promise Free-24-Month-Warranty (New Replacement Instead Of Repairing)..
Check Stock

Kings County Tools Non-Marring Soft Jaw Pipe Pliers | Won't Scratch Your Hardware | Spring Loaded with 2-3/4\ Capacity | Made in Japan

  • PROTECT YOUR FITTINGS - The unique resin jaws keep you from ruining expensive or delicate hardware.
  • SOFT RESIN JAWS - Save money by not damaging hardware and fittings.
  • STANDARD SIZE - Spring loaded with 2-3/4" capacity..
  • MULTIPURPOSE - Includes two sets of jaws: one for curved surfaces like pipes, the other for angular surfaces like large chrome nuts..
Check Stock

Cabinet Hardware Jig All Metal with Φ5mm & Φ4.2mm Drilling Hole Aluminum Alloy Cabinet Hole Drilling Template for Knob/Handle/Pull Extra 2 Drill Bits & 1 Set of Fittings Inch & Metric 2 Scale

  • [ALL METAL CABINET HARDWARE TEMPLATE]10-inch(H) * 16-inch(W), the level bar is made of hardened stainless steel. The vertical bar & other parts are....
  • [MULTI-PURPOSE HARDWARE INSTALLING TEMPLATE]Our aluminum cabinet hardware jig is designed for precisely mounting of pull/knobs/handles at even height....
  • [ACCURATE & FRIENDLY TO DIYER]Easy to assemble, to find right spots for knob/handle/pull accurately & high efficiently. 2 Metal rulers can be....
  • [PORTABLE & GREAT LONGEVITY]A must-have cabinet installation tool for professional use. This punch locator drill guide is including enough fittings....
  • [PACKAGE DETAIL]1 Cabinet hardware template+ 2 drill bits( 5mm&4mm)+1 extra set of fittings(10 small pieces) to extend service life+1 instruction+1....
Check Stock