Top Hdpe Pipe Band Saw

45-69-0010 Blade Pulley Tire Replacement for Milwaukee Band Saws Deep Cut 6230 6232-6 6225 6232 6227- 2 Pack

  • 【Part number】The band saw rubber tire part number is 45-69-0010, 45690010.The best 6 inch band saw tires are durable..
  • 【Package includes】2 high-quality band saw rubber tires..
  • 【Size】These tires saws that use 44-7/8 in Blades. These tires are 6 inches outside diameter and 1/2 inch wide.
  • 【Compatibility】These tires are compatible with the Milwaukee portable band saw models 6225, 6226, 6230, 6230N, 6232-6, 6232-6N, 6236, 6236N, 6238N and 6238.These tires will fit DeWalt band saw models DW328, DW328K, DW329, DW329K, and D28770 type 1, as well as Porter Cable Porta-Band saws models 725, 726, 736, 7723, 7724, 9725. The Porter Cable part number is AO2807..
  • 【Tips】Check the belt regularly and replace it when worn to keep the blade properly tracked and the band saw performing for the best..
Check Stock

Phoenix goods Urethane Band Saw Tires Specifically for 10" Delta 28-195, 2 Pack

  • Phoenix goods Urethane Bandsaw Tires, .095" Thick, 2 Pack.
  • Longer belt life – Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires. This alone provides you with an exceptional value over other types of band saw tires.From improved performance and safety to reduced downtime..
  • Fast, easy installation –no adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary..
  • Specifically for 10" Delta 28-195 Band Saw.
  • The surface is specially treated, more slip resistant than others Urethane Band Saw Tire, only Phoenix goods supply, All of this improves blade tracking and extends the life of your blade. urethane tire installation process is quicker and easier for increased productivity and efficiency. And, these tires are bright orange,which makes them super easy to inspectcess is quicker and easier for increased productivity and efficiency..
Check Stock

Grizzly Industrial G0803Z - 9\ Benchtop Bandsaw with Laser Guide and Quick Release

  • Blade Length (in): 30.5625 Electronic Speed Control: Yes Throat Depth Capacity (in): 2.5 Cordless / Corded: Cordless Maximum Cutting Capacity: Product Type: Portable Band Saw Manufacturer Warranty: 5 Year Max. Width Cut Cap. (in): Battery Ampere-hour (Ah): Throat Width Capacity (in): 2.5 Housing Material: Reinforced Nylon Battery Composition: Lithium-Ion (Li-ion) Battery Voltage (V): 12 Color / Finish: Red/Black.
  • Blades Included: 1 Charger Included: No Lock-on Switch: No Height (in): 6.0 Net Tool Weight (lbs): 6.0 Thermal Overload Protector: No Maximum Feet Per Minute: 570 Variable Speed: No Blade Type: Band Saw Length (in): 14.12.
  • Main Handle Type: Straight Width (in): 8.0 Integrated Work Light: Yes Power Source: Battery Voltage: 12 V Number Of Batteries: 0 Battery Included: No Battery Quantity Required: 1 No. Of Batteries Included: 21234 No. Of Batteries Required: 1 Manufacturer Warranty: 5 Years.
  • The MILWAUKEE M12 FUEL Compact Band Saw utilizes a POWERSTATE Brushless Motor and Constant Power Technology, making it the fastest cutting compact band saw in Unistrut with a cut capacity of 2-1/2 in. X 2-1/2 in. The M12 FUEL Compact Band Saw offers a compact design and weighs only six pounds, making it the lightest compact band saw on the market..
Check Stock

Milwaukee 2529-20 M12 FUEL Brushless Lithium-Ion Cordless Compact Band Saw Tool Only

  • Blade Length (in): 30.5625 Electronic Speed Control: Yes Throat Depth Capacity (in): 2.5 Cordless / Corded: Cordless Maximum Cutting Capacity: Product Type: Portable Band Saw Manufacturer Warranty: 5 Year Max. Width Cut Cap. (in): Battery Ampere-hour (Ah): Throat Width Capacity (in): 2.5 Housing Material: Reinforced Nylon Battery Composition: Lithium-Ion (Li-ion) Battery Voltage (V): 12 Color / Finish: Red/Black.
  • Blades Included: 1 Charger Included: No Lock-on Switch: No Height (in): 6.0 Net Tool Weight (lbs): 6.0 Thermal Overload Protector: No Maximum Feet Per Minute: 570 Variable Speed: No Blade Type: Band Saw Length (in): 14.12.
  • Main Handle Type: Straight Width (in): 8.0 Integrated Work Light: Yes Power Source: Battery Voltage: 12 V Number Of Batteries: 0 Battery Included: No Battery Quantity Required: 1 No. Of Batteries Included: 21234 No. Of Batteries Required: 1 Manufacturer Warranty: 5 Years.
  • The MILWAUKEE M12 FUEL Compact Band Saw utilizes a POWERSTATE Brushless Motor and Constant Power Technology, making it the fastest cutting compact band saw in Unistrut with a cut capacity of 2-1/2 in. X 2-1/2 in. The M12 FUEL Compact Band Saw offers a compact design and weighs only six pounds, making it the lightest compact band saw on the market..
Check Stock

Eastwood Benchtop Metal Aluminum Cutting Bandsaw Electric Portable Benchtop Steel

  • Our portable band saw features an aluminum-casting structure, light weight and stability..
  • Our portable band saw has the advantage of stepless speed regulation..
  • The saw bow of our portable band saw can be rotated from 0° to 45°. It is equipped with block feeder (with fixed sawing length)..
Check Stock

Carter Products QR1000 Quick Release Band Saw Blade Tension Toggle

  • Phoenix goods Urethane Bandsaw Tires 12″ x 7/8″ x .095″, 2 pack, They can be installed on any 12″ band saw that requires a 7/8″ wide and 3/32″ thick tire..
  • Longer belt life – Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires. This alone provides you with an exceptional value over other types of band saw tires.From improved performance and safety to reduced downtime..
  • Fast, easy installation –no adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary..
  • 12" x 7/8" Tire Fits: Craftsman 103.2425 103.2426 103.24280 113.242 113.24201 113.2429 113.2433 113.24331 113.24261 113.24336 113.243311 113.2434 113.243401 113.24341 113.243411 113.24344 113.2435 113.24721 113.24731 113.24741 113.24744 113.248211 113.248212 113.24829 113.24832 113.248321 113.248322 113.24844 113.24851 119.22400 351.22400, Also fits for any band saw that needs a 12″ x 7/8″ x .095″" tire.The actual wheel diameter can....
Check Stock

Inside Pipe Cutter, 1/4\ Hex Shank PVC Plumbing Inside Cutter Internal Plastic Pipe Cutter Set (32mm Saw Blades*3, 44mm Saw Blades*1）

  • Inside plumbing pipe cutter kit installation sequence: extension rod (first) - serrated washer - saw blade - flat washer - screw (last). The screws must be tightened and reinforced! Refer to the fourth photo for example~.
  • A set of plumbing PVC pipe internal cutter with 4 saw blades (3 blades with 1.25 inch diameter and 1 blade with 1.75 inch diameter), and two sets of screw fastening parts. Please protect the saw blade. There is a layer of protective oil on the saw blade. Do not mind. Refer to the fourth picture for parts installation sequence..
  • The saw handle is made of heavy-duty carbon steel for hardness, durability and smooth surface. The saw blade is made of strong HHS, durable and sharp, very suitable for PVC and plastic pipes, also can be used for soft metal pipes, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • The overall length of plumbing pipe cutteris 10.5 cm(4.13"), and the length of the hexagonal handle is 2.8 cm(1.1"). The pipe cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside but also for work scenarios where pipes need to be cut from the....
Check Stock

Plumbing Inside Cutter, 1/4\ Hex Shank Pipe PVC Inside Cutter Internal Plastic Pipe Cutter(32mm Saw Blades*3, 44mm Saw Blades*1，Hexagon wrench）

  • Plumbing Inside pipe cutter kit installation sequence: extension rod (first) - serrated washer - saw blade - flat washer - screw (last). The screws must be tightened and reinforced! Refer to the fourth photo for example~.
  • A set of plumbing PVC pipe internal cutter with 4 saw blades (3 blades with 1.25 inch diameter and 1 blade with 1.75 inch diameter), two sets of screw fastening parts and a hexagon wrench. Please protect the saw blade. There is a layer of protective oil on the saw blade. Do not mind. Refer to the fourth picture for parts installation sequence..
  • The plumbing saw handle is made of heavy-duty carbon steel for hardness, durability and smooth surface. The saw blade is made of strong HHS, durable and sharp, very suitable for PVC and plastic pipes, also can be used for soft metal pipes, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • The overall length of plumbing pipe cutteris 10.5 cm(4.13"), and the length of the hexagonal handle is 2.8 cm(1.1"). The pipe cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside but also for work scenarios where pip....
Check Stock

Ezygrind Inside Pipe Cutter with 1 1/2\ (36mm) Diamond Blade

  • Pipe cutter for cutting plastic pipe 1 1/2" - 3" from the inside..
  • Internal pipe cutter includes 2 Free Flow Guide Wheels that stabilize the blade during cutting..
  • Plumbing tool with reduced cutting vibration for a smooth cutting action..
  • Inside PVC pipe cutter for cutting HDPE and ABS pipe in hard to reach places..
  • Internal PVC pipe cutter comes with a longlife diamond blade that can cut concrete..
Check Stock

DEWALT FLEXVOLT 60V MAX* Circular Saw for Framing, 7-1/4-Inch, Tool Only (DCS577B)

  • A BETTER WAY TO MEASURE - The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen..
  • DIGITIZE YOUR MITER SAW - Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools. The M1 Caliber eliminates the need for a tape measure and pencil..
  • COMPATIBILITY - Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws. Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards to composites to pipe..
  • INCREASED SAFETY - Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location..
  • QUICK AND EASY SETUP - Clamp to your saw fence, release the arm, input your blade thickness and begin to cut. Perfect for professionals, contractors, woodworkers and other tradespeople. The M1 will provide the most accurate read on smooth materials..
Check Stock

FOXBC 64-1/2 Inch Bandsaw Blades, 64-1/2-Inch X 1/2\ X 14/18 TPI for Metal Cutting

  • 64-1/2-Inch x 1/2" X 0.025 X 14/18 TPI Band Saw Blades for Metal Cutting.
  • Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring a 64-1/2" long 1/2" wide blade.
  • Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
  • Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
  • Fits all band saws requiring a 64-1/2" long 1/2" wide blade.
  • Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
  • Unique welding technique :strong and smoother welding point.
Check Stock

Electric Reciprocating Saw, Portable Electric Jig Saw for Wood Metal Cutting, Electric Drill Tool Attachment, Electric Hand Saw with 3 Saw Blades, Blue

  • ...ess electric drill, lithium battery-powered cordless electric drill, impact drill, etc., universal electric drill to electric saw, convenient and fast, no need for another electric saw..
  • 【Multi-Material Cutting】 3 kinds of saw blades can be used for wood cutting, steel pipe cutting, PVC pipe cutting, tree pruning, curved edge cutting and other purposes. The saw blade is quickly replaced (different materials need to be matched with different saw blades)..
  • 【Excellent Performance】 high hardness saw blade drive shaft (triangular drive shaft).
  • widened and thickened baffle to ensure safety.
  • high-strength anti-fall shell, strong and durable.
  • auxiliary handle, convenient for applying force..
  • 【Small and Easy to Carry】 100mm/135mm/150mm saw blades of different sizes and different purposes, the total length of the assembly is 27cm long, curve cutting, irregular shape processing, etc. are convenient and quick..
Check Stock