Top Hdpe Pipe Extrusion Line

SharkBite 3/4-Inch Tee, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U370LFZ and U370LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 5/16\ 3.3ft Blue for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 5/16-inch(5mm x 8mm)(ID. x OD.), 1/16-inch(1.5mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 3/8\ 3.3ft Yellow for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 3/8-inch(4.5mm x 9.3mm)(ID. x OD.), 3/32-inch(2.4mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

0000-930-2340 Trimmer Line .095" (280') Orange 1 Lb Roll

  • An extremely robust, long-lasting trimmer line designed for some of the toughest trimming applications..
  • This rugged line is formed using 3-component, tri-extrusion technology..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance.
Check Stock

SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U362LFZ and U362LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

RIDGID 19238 NaviTrack Scout Locator, Underground Pipe Locator and Underground Cable Location Device & 16728 Remote Transmitter (512 Hertz Sonde) for Underground Pipe Location,Red/Black,Small

  • Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
  • Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
  • Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
  • Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
  • Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
  • Product 2: Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
  • Product 2: Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
  • Product 2: Meets FCC Class B and EN 55022 Class B requirements.
  • Product 2: Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
Check Stock

MECCANIXITY PVC Petrol Fuel Line Hose 3/16 x 5/16 16ft Pink for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for....
  • Fuel line hose, is in size of : 5mm/0.2-inch inner dia, 8mm/0.31-inch outer dia, 1.5mm/0.06-inch wall thickness, 5m/16ft total length.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment.....
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

10' x 10' x 55' Baseball Batting Cage Net - #42 Heavy Duty Net [Net World Sports] 24hr Shipping

  • Exceptional quality baseball or softball batting cage nets for use in all environments, indoors or out, nets will give you years of enjoyment..
  • #42 HDPE knotted netting with 218 LB. break strength..
  • Made with twisted knotted #42 HDPE netting for maximum UV and abrasion resistance..
  • A 3/8” HDPE over lock stitched border rope on all edges, and center roof support line, with convenient 6’ rope tails on each end for easier suspending..
  • All cages have a 4 ft. overlapping entry door with rope borders on one end for easy entry..
Check Stock

Genuine OEM Engine Coolant Thermostat Kit For BMW E60 E61 E82 E83 E85 E86 E88 E89 E90 E91 E92 E93 F30 1 3 5 X Z Series 3.0L L6

  • Fit for: BMW E46 E39 E36 E85 Z3 Z4 320i 323i 325i 328i 330i 525i 528i 530i. More detailed compatibilities please see Product Description..
  • A leaking heater pipe line is not only aA coolant pipe is a hard plastic line used to transport coolant between cooling system components. It is usually attached on both ends by coolant hoses, and the coolant pipe can, in some cases, act as a junction to split coolant to other parts. Often, a coolant pipe may be connected between the radiator and water pump, or between the water pump and the heater core..
  • A leaking heater pipe line is not only a waste of engine heat but also a cause of engine damage. Together with the heater hoses, this pipe line is where heated coolant passes through to eventually warm your cabin during winter months. If this pipe or tube is damaged, your coolant level will deplete quickly, thus resulting to heater malfunction and a steaming engine..
  • Please be sure to compare carefully with Pictures or OE number before buying items. If you are not s....
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

Garden Bench – Natural Sandstone Appearance – HDPE polyethylene plastic – Lightweight – 12” Height

  • NATURAL TEXTURE AND APPEARANCE – The EMSCO Group Garden Bench has a natural texture that resembles real stone, making it a perfect garden accent.Cube feet (meters) - 3.77 (0.11).
  • DURABLE HDPE Polyethylene Plastic CONSTRUCTION – This particular statue is manufactured from a durable HDPE Polyethylene Plastic to replicate a stone statue at a lower price..
  • LIGHTWEIGHT – This statue is made of a type of HDPE Polyethylene Plastic that's well known for its durability and lightweight properties. Features convenient fill-hole at the base to allow for sand filling, adding more stability.
  • ENHANCES ANY LANDSCAPE PROJECT – This statue makes a great addition to the beauty of any lawn or garden!.
  • VARIOUS PRODUCTS AND DESIGNS – EMSCO Group offers a complete statuary line with many options of figurines and sculptures!.
Check Stock