Top Hdpe Pipe Extrusion Lines

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • 【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger..
  • 【Easy to Operate】Step1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step2.Place the pipe marker tool on the pipe and find the angle you want. Step3.Push the center column down to the fixed point position. Step4.Tap with a hammer to leave a fixed point mark on the pipe..
  • 【Durable and Sturdy Material】The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and....
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U362LFZ and U362LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1 Inch x 300 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U880W300

  • SHARKBITE WHITE PEX-B PIPE: This SharkBite white PEX-B pipe is available in coils up to 1,000 feet in length, allowing longer runs and fewer connections to save time, money, and potential leak points.
  • FREEZE RESISTANT: This flexible PEX tubing expands and contracts as water freezes and thaws within the pipe.
  • ideal for hot and cold potable water distribution, fire protection, and municipal water service lines.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass PEX water tubing offers faster installation compared to rigid pipe, six-month UV resistance, and the highest-rated chlorine resistance.
  • PREFERRED BY THE PRO: This portable PEX pipe is certified to meet ASTM F2023 oxidative-resistance requirements for continuous hot water recirculation.
  • approved for water service lines and burial applications including being buried under concrete.
  • SPECS: SharkBite water pipe tubing features a minimum working temperature of 33 degrees F at 160 PSI, a maximum working temperature of 200 degrees F at 80 PSI, and a maximum working pressure of 160 PSI at 33 to 70 degrees F.
Check Stock

HEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 75-feet 120V Roof deicing and Pipe freeze Protection

  • 6 ft. water pipe heating cable, 42 watt, black color.
  • Stops metal and rigid plastic pipes from freezing down to -40°F — built-in thermostat automatically turns heating on when pipe temperature is below 42.8° F (close to freezing) and turns heating off once pipe is warmed to 55.4° F (well above freezing).
  • A single 6 foot heating cable is suitable for 6 foot to 8 foot long pipes that are 3/8 inches to 3/4 inches in diameter, or for 6 foot long pipes that are 1 to 1-1/2" in diameter. NOTE: Use only for water filled plastic (including PEX) or metal pipes. Not for use with anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines, and so on..
  • Features grounded plug with indicator light.
  • Pre-assembled, easy to install using the included instructions. Materials required (not included) are: aluminum foil (recommended for plastic pipe), fiberglass plumbing pipe insulation, fiberglass tape or similar with temperature rating 175° F or higher..
Check Stock

SUNEVEN Metal Craft Brass Bracket Floating Shelves Shelf Brackets Rack Wall Hanging Decoration Sector Bracket Modern Iron Art Stand for Home Office Restaurant for Christmas Decor

  • ❤ Iron Pipe Shelf Bracket :Use the thickened base and Thickened galvanized steel pipe.Size:5.9*5.9inch/7.67*7.67inch/9.87*9.87inch(Note: Only shelf,wood board no include).
  • ❤ These pipe shelf supports are reusable, and easy to instal..
  • ❤ Use the heavy-duty wall brackets keep your shelf safely attached to the wall..
  • ❤ There are 11 ‘lines’ on each bracket, the additional lines gives them the extra glam you are going for..
  • ❤ Perfect for Custom shelves, Floating shelves, Plumbing Pipe Shelf, Restoration Hardware Shelf.Perfect for Home Office Restaurant Decor etc.Wall Shelf Shelf Brackets Shelf Supports Iron Shelf Brackets Shelf Supports Hanging Shelf Brackets Shelf Supports Hanging Wall Hardware Hanging Wall Shelf Brackets Shelf Supports Shelf BracketsTools Industrial Shelf Brackets Shelf Supports Custom Shelf Plumbing Pipe Shelf Restoration Hardware Shelf Wall Mounted Floating Shelf Hanging.
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

ALSKAR DIAMOND ADTVBT 8 inch All Purpose Metal Cutting Dry or Wet Cutting Segmented Diamond Blades for Metal and Plastic Materials (8\)

  • All purpose. Used to cut many metal and plastic materials (angel iron, rod, rebar, iron bars, ductile pipe and cast iron, HDPE and PVC plastic pipe, metal roof deck, metal sheets, copper tubes, perlings, drywall studs) and concrete and asphalt..
  • Vacuum-brazed segmented bladewith the rescue/fire/accident designation.
  • It is equivalent to 80-100 pieces of Abrasive metal cutting blades. Unlike traditional abrasive discs that shrink with use, this blade maintains its size and consistent cutting depth..
  • Size 8"x0.080"x0.315"/8mm. Arbor size 7/8"-5/8"..
Check Stock

Jackson Safety Pipe Measure Tool, Wrap-Around Tape, Flex Angle Measuring, Marking Gauge 3” to 6” Diameter, Medium, Black, 14752

  • PREMIUM PIPE MEASURER – Easy to use marking tool designed for pipe fitters and welders as economical measuring tape tool for marking straight lines around pipes, enabeling superior precision at all times.
  • HEAT RESISTANT MATERIAL – Comes in black and made from a flexible gasket material with resistance to both low or high temperatures up to 350º Fahrenheit.
  • PRINTED SCALES – Tape printed with a scale in inches, and features an inch chart, tangent chart, and other helpful markings to assist you in making straight lines around pipes.
  • DIAMETER RANGE – Flexible pipe angle measuring tool has a marking scale from 3 88" to 4'.
  • magnetic marker holder designed to gauge pipe diameters that are sized 3" to 6".
  • SAFETY STANDARDS – Unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Ridged Slats Slat Depot Single Wall Bottom Locking Privacy Slat for 3 4 5 6 7 and 8 Chain Link Fence 3ft Brown

  • 3' (32.5") privacy slat desgned for 3ft 11 or 9 Gauge Chain Link with 2 inch diamond. Also works with 11.5 amd 12.5 gauge wire with larger diamond but....
  • Each slat measures 1.25 inches wide. Bottom-locking Ridged Slats will provide approximately 85 percent blockage in chain link with a 2" diamond. Slats....
  • Each box contains 82 “W” shaped slats and three 42-inch pieces of Viper Channel - enough to cover 10 linear feet of chain link with a 2" diamond....
  • Slats are manufactured in the USA using domestically sourced HDPE (high density polyethylene), color concentrate, and UV inhibitors to protect from....
  • Single wall bottom lock Ridged Slats provide the most privacy for the money compared to other vertically inserted slat designs. This wider extrusion....
Check Stock