Top Header Collector Gaskets

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
Port configuration comparable to Fel-Pro 1426.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

A BELOVED COLLECTORS ITEM: King Friday is a Mr. Rogers icon. Now you can have this exclusive enamel collector pin to showcase your fandom..
HARD ENAMEL & GLOSS FINISH: Attention to detail is a must for collector’s items. This decorative pin features a detailed King Friday character made of hard enamel and a glossy finish..
SHOWCASE YOUR PIN: This pin measures approximately 1.5-inches in height – the perfect size to display in your collection of other Mr. Rogers collectible items..
OFFICIALLY LICENSED HEADER CARD: Pin will arrive displayed on an officially licensed Mr. Rogers convention header card. Having this impressive showcase piece will greatly enhance your collection!.
LIMITED EDITION: A San Diego Comic-Con 2018 exclusive! Only 1000 pins were produced. Don’t pass up this opportunity to own a classic Mr. Rogers character in the form of a rare collector’s pin!.

1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
Port configuration comparable to Fel-Pro 1404.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

3.00 Inch Header Buddy Collector Kit 3.00 Inlet 2.25 Outlet 3 Bolt Flange Jones.
2 Flanges 2 Collectors and 6 Nuts and Bolts Included.
HEADER BUDDY Is An Innovative, New Design For Header/Exhaust Assembly That Requires NO GASKET.

Dynatech header flanges are of the highest quality for a great start to your exhaust header.
1/4 thick and CNC laser cut for a clean transition from the cylinder head port to the header tube.
This is made of mild steel for a strong long-lasting construction.
A great exhaust system starts at the beginning - the flange and gaskets.
A big Dynatech advantage is the wide selection of port matched flanges.

Available with 1-3/4” or 1-7/8” mandrel bent primary tubes and 2.50” collectors with merge spears for increased exhaust velocity.
3/8” thick header flanges for a leak-free seal.
2.50” V-band flanges and clamps for superior seal and even pressure at the flange.
Premium header gaskets and bolts included.
Designed for a variety of configurations (Up and Forward, Down and Forward, or Down and Back).

1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.

1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.

1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.

These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
1-5/8" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
These come painted black for corrosion protection prior to use - we suggest stripping the paint and applying your preferred color of high temperature header paint.
Oval exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.

STAINLESS STEEL CONSTRUCTION - Made of high quality T-304 stainless steel material, which features with strength, rigidity and durability, preventing....
SHORTY HEADER DESIGN - 4-1 shorty header design increases high flow air. The bent shape is helpful to the unrestricted flow along the entire flow....
HIGH PERFORMANCE - It provides each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders. More....
EASY INSTALLATION - Direct bolt-on installation , no more modification needs but hardware such as gaskets and bolts are necessary. 1 X pair of exhaust....
FITMENT - Headers may need to be clearanced if using the stock steering shaft, not compatible with factory AC components Compatible with 91-04 GMC....