Top Heat Exchange Steel Pipe

25 Pack Stainless Steel Hose Clamps, 1/4 inch to 1/2 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

  • Adjustable hose clamps are high torque, adjustable from 1/4 - 1/2 inch (6-12mm), ideal as 1/4 inch pipe clamps, 3/8 inch tube clamps, 1/2 inch screw clamps, etc..
  • Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryer, vent, radiator, etc. to meet your needs in different applications..
  • Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
  • You will receive 25 pieces of 1/2 to 1/4 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange!.
Check Stock

4 Pack Heavy Duty Monkey Wrench Set for Mechanics, Plumbing, Automotive Tools, Pipe Wrenches in 4 Sizes

  • Pipe Wrenches Set: Suitable for all pipe related home improvement repairs.
  • gas tank repair, household plumbing, or vehicle maintenance.
  • the wrench features an easy-spinning lock nut.
  • Monkey Wrench: The deep grooved teeth of each straight pipe wrench lock in place to provide a tight grip around smooth, round surfaces like shower heads, bathroom sinks, and drains.
  • High Quality: The head of the pipe wrench has a drop forged ductile steel jaw, heat-treated to resist distortion or breakage.
  • the I-beam cast iron handle is wrapped with stiff rubber for a secure hold.
  • Dimensions: The wrenches measures 8 inches, 10 inches, 12 inches, and 14 inches.
  • What's Included: The set comes with 4 of our quality pipe wrenches.
Check Stock

25 Pack Stainless Steel Hose Clamps, 3/4 inch to 1-1/8 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

  • Adjustable hose clamps are high torque, adjustable from 3/4 - 1-1/8 inch (19-29mm), ideal as 3/4 inch pipe clamps, 1 inch hose clamps, 1-1/8 inch metal clamps, etc..
  • Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryer, vent, radiator, etc. to meet your needs in different applications..
  • Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
  • You will receive 25 pieces of 3/4 to 1-1/8 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange!.
Check Stock

Toolman Premium Circular Saw Blade Universal Fit 4\ for Wood and Plastic Cutting STH019

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 115mm(4.5"), the incision thickness is approximately 2.3mm-2.4mm, with the arbor of 22.23mm(7/8"), suitable for most of hand-held grinder or trim saw with 7/8" arbor.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 13,300 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

Heidolph Temperature Sensor for Laborota 4003 Series Control Rotary Evaporator

  • Main structural parts made of corrosion-resisting Stainless steel, Long Using Life-span..
  • Transparent protective cover, heat preservation, saving energy, burst-proof, splash-proof, antirust, antiseptic..
  • Vertical condenser with feed-in pipe, big condensing pipe, big evaporating pipe, evaporating rate is more superior than rank instruments..
  • Evaporator is used for concentration, crystallization, separating and recovery biochemistry, organic chemistry, medical and experiment & scientific research of institutes and universities..
Check Stock

EXCEART 100pcs Stainless Steel Pipe Screen Filters Scotte Screens Metal Screen Ball Smoking Pipe Screen 13mm (Silver)

  • Effectively allow free flow of smoke and air while keeping dirty, harmful ash from pulling through your pipe. It let the tobacco lasts longer and made the smoking easier..
  • the hot ash and embers from entering the pipe, making the pipe easier to clean. smoking pipe accessories.
  • Good for long- term and repeated use. Metal Scotte Screens.
  • Stainless steel screens are longer lasting than brass and hold up to heat far better. Tobacco Pipe Filters.
  • Suitable for most sizes of pipes. Premium Pipe Screen Filters.
Check Stock

SHDIATOOL 12 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 300mm(12"), the incision thickness is approximately 3mm, Bore 25.4mm(1 In.) with pin hole.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 5,059 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

SHDIATOOL 14 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 350mm(14"), the incision thickness is approximately 3.2mm, Bore 25.4mm(1 In.) with pin hole.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 4,365 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

SHDIATOOL 7 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 180mm(7"), the incision thickness is approximately 2.6mm, with the arbor of 22.23mm(7/8").
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 8,730 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

SHDIATOOL 9 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 230mm(9"), the incision thickness is approximately 2.6mm, with the arbor of 22.23mm(7/8").
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 6,790 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

Champion Cutting Tool Corp Circular Saw Blade 5-3/8", 50T (RZR-538-50-ST)- Cut Stainless

  • New & innovative, RZR Cermet tipped circular saw blades cut faster and 2X longer than standard carbide tipped blades. Cermet = a ceramic and metal compound that resists heat and friction.
  • Razor sharp cermet teeth, specifically engineered to cut stainless steel resist and dissipate heat for cool, smooth, bur-free cuts.
  • Feature 2X more teeth than standard cutting blades to cut through tough 304 stainless steel.
  • Special 2-step saw body design and unique laser slits reduce vibration, noise and increase stability. Ideal for cutting stainless steel plate, angle iron, pipe, all thread/rebar and more..
  • Max thickness of cut= 1/8".Please note that when cutting pipe or tubing, "max thickness of cut" refers to wall thickness, not overall diam..
Check Stock

SYMOTTEC 1/18'' to 3-1/2'' Exhaust Tail Pipe Expander Muffler Spreader Tool Set Compatible with Most Vehicles and Trucks

  • This Tail Pipe Expander set includes three different expander sizes, can work with all 1-1/8inch to 3-1/2inch ID thin-wall pipes and compatible with most vehicles and trucks..
  • Drop forged and heat treated steel construction for strength and hardness and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence..
  • Kit Includes 1 x small expander: 1-1/8" to 1-3/4", 1 x medium expander: 1-1/2" to 2-1/2", 1 x large Expander: 2-1/8" to 3-1/2, 6 x extra O-rings..
  • IMPORTANT NOTICE!!! (1) When expanding, the beveled steel cones of the expander must be fully inserted into the pipe, not half.
  • (2) Try to use a manual ratchet or manual wrench to turn the pipe support tool to expand the pipe, rather than electric Ratchet.
  • (3) Avoid twisting the expander with excessive force..
Check Stock