Top Heat Exchanger Safety

How to Train A Police Bloodhound and Scent Discriminating Patrol Dog - Second Edition

• Endless hot water, On-demand usage, Compact, Space saving, Energy conservation.
• Computerized safety features, No pilot light to have to worry about.
• Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes.
• Satisfies the 2012 SCAQMD Rule 1146.2 for Ultra-Low NOx Emissions.
• Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel, Integrated controls and power cord as standard features.

Natural Gas Tankless Water Heater, FOGATTI Indoor 4.0 GPM, 90,000 BTU Instant Hot Water Heater, InstaGas Classic 90

• ...ater heater, yet it produces approximately 4.0 GPM of hot water through 90,000 BTU for both bathroom and kitchen hot water demand. The highly integrated components also provide greater safety from water pressure surges without the need to install an expansion tank..
• 【Fast and endless supply of hot water】The heat exchanger quickly heats the water to a maximum of 140℉ in 2 seconds and the hot water is quickly piped through to the shower and tap. No need to wait for the water temperature to heat up slowly like a tank water heater. After that it continues to operate at approximately 4.0 GPM for 40 minutes, which is enough time to produce almost 160 gallons of hot water..
• 【Stable and comfortable temperature】Benefiting from the calculation and control of the heating power 1000/s by the chip, the temperature difference of the water can be precisely controlled within ±2°F..
• 【High compatibility and easy installation】Most tank water heaters have exhaust vent, water and gas pipe that can be universally used in tankless, requiring only a simple re-layout. If installing a tankless water heater in a new house, its compact size makes it easy to install. Of course, we recommend that all installations are carried out in accordance with local building and....

Natural Gas Tankless Water Heater, FOGATTI Outdoor 7.5 GPM, 170,000 BTU White Instant Hot Water Heater, InstaGas Comfort 170S Series

• 【Endless water supply without preheating】The heat exchanger quickly heats the water to a maximum of 140 °F within 2 seconds, which is ready for use without waiting for hot water. It can run at approximately 7.5 GPM for 40 minutes, enough to produce almost 300 gallons of hot water. Make a multi-point water supply for the whole house to meet your family's water needs..
• 【Precise temperature control and stable temperature】Equipped with a wire controller cord length of 164ft, allowing you to control the water temperature indoors. The burner can be burnt in sections to meet the water temperature demand in the four seasons. Benefiting from the calculation and control of the heating power 1000/s by the chip, the temperature difference of the water can be precisely controlled within ±2°F..
• 【Compact design for easy installation】The tankless design is 1/4 the size of a 50 gallon tank water heater, making it easy to install. The highly integrated components also provide greater safety from water pressure surges without the need to install an expansion tank..
• 【Outdoor installation to save space】The product is installed outdoors and does not occupy the living space. The bottom built-in forced DC fan eliminates the influence of external wind. So as ....

Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute, 199,000 BTU

• Endless hot water, On-demand usage, Compact, Space saving, Energy conservation.
• Computerized safety features, No pilot light to have to worry about.
• Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes.
• Satisfies the 2012 SCAQMD Rule 1146.2 for Ultra-Low NOx Emissions.
• Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel, Integrated controls and power cord as standard features.

The Purge

• 94-Percent Energy efficient with stainless-steel condensing heat exchanger.
• Intelligent electronic controls designed to increase energy efficiency and safety.
• Up to 38-Feet of 3-Inch PVC Pipe or 5-Feet of 2-Inch PVC Pipe.

Ferroday 20 Plate Wort Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 NPT Thread Plate Chiller (7.5\ x 1.97\)

• [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
• [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 20 brazed plates and cools wort within minutes rather than several hours..
• [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
• [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
• [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....

FERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller - 7.3' x 2.8'

• [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
• [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours..
• [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
• [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
• [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....

IIS 220V 240V 18KW Premium Quality Water Heater Thermostat Swimming Pool Thermostat SPA Bath Portable Pool Heater Electric Water Heater Thermostat Heater Pump

• Industry-leading hydraulic performance with faster speed-to-heat capability.
• Intuitive and easy-to-operate electronic panel.
• Exclusive "Totally Managed" cupro nickel heat exchanger water flow.
• Low NOx emissions—meets clean air quality standards.

TC-Home 16L Natural Gas Tankless Hot Water Heater 4.2GPM on Demand Water Heater

Rinnai M060SN Condensing Gas Boiler Natural Gas 60K BTU

• Hot water heater: Heat the whole house with this boiler featuring a self-cleaning stainless-steel heat exchanger with a modulating ceramic burner and....
• Smart Features: Multizone control capability allows thermostat and control pumps to connect directly to the boiler of the smart heater that warms the....
• User-Friendly Interface: Electric heater features a digital display main screen, a temperature and pressure display, and an outdoor reset sensor with....
• Space-Saving Design: Compact wall-mounted design of this water heater saves space.
• multiple venting options include a 2-inch PVC up to 60 feet and....
• Guaranteed to Last: 12-, 5-, and 1-year residential and 5-, 5-, and 1-year commercial standard warranty for heat exchanger, parts, and labor....

Rheem RTGH-95DVLN 9.5 GPM Indoor Direct Vent Tankless Natural Gas Water Heater

• 94-Percent Energy efficient with stainless-steel condensing heat exchanger.
• Intelligent electronic controls designed to increase energy efficiency and safety.
• Up to 38-Feet of 3-Inch PVC Pipe or 5-Feet of 2-Inch PVC Pipe.

AB Plate Heat Exchanger, 3'x 8' 50 Plates Water To Water Heat Exchanger, Copper/SS316L Stainless Steel Brazed Plate Heat Exchanger For Floor Heating, Water Heating, Snow Melting

• 【Premium Quality】Our plate heat exchanger is UL listed and it is made of high quality 316L stainless steel which are brazed together by 99.9% copper at the edges for a reliable and rugged part to form a durable, integral piece that can resist leakage and withstand high pressure and temperature..
• 【Convenient For Use And Energy Saving】Smooth Thread makes a easy, quick, flexible hookup. Highly conductive and super-thin stainless steel plates make good performance and economy for heating transfer and cooling without electricity consumption and oxygen consumption..
• 【Product Parameter】310000 - 380,000 BTU CAPACITY: Depending on the application, this product can produce 160kBtu to 380kBtu per hour. 50 PLATES.
• 3"x8", 3/4" NPT: 50 brazed plates work to efficiently heat water for your application..
• 【Multiple Applications】AB water heat exchanger offers the highest level of thermal efficiency and durability in a compact & lightweight unit, perfect for domestic water heating, Floor Heating, Snow Melting, District or Zone Heating Systems, Outdoor Wood Furnaces, Hydraulic and Lube Oil Coolers, Radiator Heating, Hydronic Heating, Solar Heating, Wood Boiler..
• 【100% Satisfaction Service】 Our heat exchanger comes with a 1-year warranty to cover manufact....