Top Heat Resistant Steel Alloys

XLCMSY Cobalt Drill Bit Set, M35 HSS Metric Straight Shank Twist Drill Heat Resistant Metal Drill Bits for Hard Metal, Stainless Steel, Hardened Steel, Cast Iron and Wood, 1.5-6.5mm (13 Pcs)

  • 【Heat Resistant】 This metric straight shank twist drill set is made of 5% cobalt high speed steel, adding molybdenum and cobalt to form a hardened alloy with a Rockwell hardness of 67, It is super heat resistant and wear resistance can cut hard metals quickly, suitable for drilling high hardness materials, up to 10 times life than ordinary HSS drill bits..
  • 【Safe & Eco-friendly】 High speed steel with 5% cobalt, durable, safe and eco-friendly, providing longer tool life and reducing environmental pollution, It is a very practical and user-friendly drill bit for cutting through hardened material, golden surface treatment holds up lubricant better for smoother drilling..
  • 【Lightweight & Durable】 Designed with a 135 degree split point, these metric drill bits are very lightweight, eliminating the need for a center punch, making cutting faster and less powerful, preventing walking and cutting stainless steel more precisely, thanks to its precision grinding inclined blade design, each bit ensures fast drilling with excellent chip removal..
  • 【Multiple Sizes & Widely Used】The metal drill bits set for steel ....
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • ...fessional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 30,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and s....
Check Stock

GYROS 1.5” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41502

  • ...fessional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 45,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and s....
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41702

  • ...fessional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 42,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and s....
Check Stock

Supercut Band Saw Blade Made in The USA 93 1/2-inch X 1/4-inch X .025-inch, 14 TPI Carbon Tool Steel Blade for Cutting Wood, Aluminum, and Other Materials

  • 100% MADE IN THE USA - Not made anywhere else but the USA..
  • 100% LIMITED LIFETIME WELD WARRANTY - Fatigue resistant premium carbon tool steel blade is built with the toughest alloys fused by our superior weld..
  • INTRICATE CUTS - Heavy duty and heat-treated raker tooth that can withstand sharp flexing and high speeds..
  • VERSATILE – Cut all types of wood and non-ferrous metals (copper, brass, aluminum)..
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

Supercut Bandsaw Supercut Made in USA 70 1/2-inch x 3/8-inch x .025 x 4 Hook Premium Carbide Infused Bandsaw Blade for Cutting Wood Materials

  • 100% MADE IN THE USA - Not made anywhere else but the USA..
  • 100% LIMITED LIFETIME WELD WARRANTY - Fatigue resistant premium carbon tool steel blade is built with the toughest alloys fused by our superior weld..
  • LESS HEAT & CHATTER – Aggressive alternate hook tooth and polished design allows the blade to freely move through the material..
  • CLEAN CUTS – Precision ground, razor sharp teeth, polished back and sides for reduced friction and the cleanest cuts possible..
  • MINIMAL WASTE – The best blade for the serious woodworker cutting exotic woods, where waste is not an option..
Check Stock

Buck Knives 110 Slim Select Lockback Pocket Knife with Thumb Studs and Removable/Reversible Deep Carry Pocket Clip, 3-3/4" 420HC Blade

  • RAZOR SHARP MODIFIED CLIP POINT BLADE- 3-3/4" 420HC stainless steel drop point blade has excellent strength, edge retention and is corrosion resistant. The modified tip makes the blade thinner with a sharper point..
  • STRENGTH AND SAFETY - Easy to open with thumb studs. The lock back design locks the blade open for reliable strength and safety while you work. Closed Length 4-7/8" Weight 2. 8 oz..
  • CONVENIENT CARRY- Heat-treated stainless steel deep carry pocket clip keeps the knife within easy reach while riding discreetly in the pocket. The clip is reversible and can be removed..
  • PREMIUM MATERIALS - The textured, glass filled nylon handle provides a secure grip. The 420HC blade approaches the wear resistance of high carbon alloys while delivering the corrosion resistance of chromium stainless steels..
  • AN AMERICAN ICON – Buck knives is known for American made, high-quality edged tools. With over 110 years of experience and craftsmanship, Buck continues to be an innovator in the cutlery industry..
Check Stock

LCW MPS16 Manganese Phosphate Parkerizing Solution 16oz

  • SPECS: 4 oz can of ceramic infused formula for bake-on coating and color customization.
  • COMPATABILITY: Designed for use with ferrous metals, alloys, stainless steel and synthetics.
  • DURABLE: Highly resistant to scratching, chipping and solvents.
  • FUNCTION: Highly resistant non-reflective matte finish.
  • AVAILABLE: Offered in black, flat dark earth and olive drab.
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler. Please contact Wheeler customer service for assistance.
Check Stock

PSCCO 12PCS U-Shaped Steel Tapped Hole Clip On Nut Including Screws

  • Corrosion resistant metal. However, over time, all metals tend to corrode. However, the properties of this metal are better than those of soft low-carbon alloys such as carbon steel..
  • U-shaped Steel Tapped Hole Clip Size: 25*14*5mm.
  • Just clamp it on the panel and fix it with the screws provided..
  • Clips are galvanized and screws are powder coated..
Check Stock

BHA Green Zirconia with Grind Aid Quick Change Sanding Discs Type R Male Roll On, 2' (36 Grit) - 25 Pack

  • 2 Inch Diameter Quick Change Sanding Discs made with premium Zirconia abrasive grains featuring Active Grinding Aid which prevents loading and reduces heat buildup.
  • Excellent for use carbon steel, cast iron, titanium, aluminum, brass, bronze, copper, or hard woods as well as heat sensitive materials such as stainless steel, nickel alloy or cobalt alloys..
  • Feature Male Type R - Quick Roll On / Roll Off fastening system and are meant to be used with a 2-inch backing pad that can then be attached to any ¼” power drill, air grinding tool, or die grinder..
  • Available in 36 grit, 40 grit, 60 grit, 80 grit, and 120 grit.
  • Comes with 25 Quick Change Sanding Discs Per Pack.
Check Stock

LPS 02908 Copper Anti-Seize,

  • MRO Anti seize solution 2500 is composed of grease, calcium and graphite for heavy duty applications. It is the proffered choice for chemical plants and refineries..
  • Solution 2500 can help reduce friction between two metal contact points for stainless steel and other alloys..
  • Thus eliminating the galling/seizing or locking up effect most commonly seen with stainless steel fasteners that are under extreme pressure..
  • This solution can also extend the life of a fastener and ease assembly and disassembly of fasteners..
  • Solution 2500 is temperature resistant up to 2500°F. Meets MIL-A-907-E..
Check Stock