Top Heat Shrink Silicone Tubing

Industrial Heat Shrink Tubing Kit,AIRIC 300pcs 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat Shrink Tubing Black, 7 Sizes(Diameter): 3/4, 1/2, 3/8, 1/4, 3/16, 1/8, 3/32 inch

  • 7 Sizes: Industrial heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". The length of heat shrink tube is precut to 45mm..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

2 Pcs 1/2 inch (Diameter) Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK (4 Feet, Black & Red)

  • ★ Premium Wire Protector: Our heat shrink tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be exposed to harsh environments. They can be also used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your family. Round diameter: 1/2'', Length: 1.22M(4Ft)..
  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY..
  • ★ Fast & Easy Use: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and wi....
Check Stock

MILAPEAK 180 PCS Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black

  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Multiple Sizes: 180pcs black high-quality marine heat shrink tubing for your choose, various sizes can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc..
  • ★ Tidy Connection: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are both UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your famaily from toxins..
  • ★ Fast & Easy Use: Our heat shrink tubing was pre-cut to 3.5 inches, it is 3:1 heat shrink ratio, and will shrink up to 1/3 of or....
Check Stock

10 pcs 8 AWG 8 Gauge Butt Splice Connector Pure Copper Tin Coated Marine Grade Uninsulated - by WindyNation

  • Includes AWG splice butt connectors (use selection tabs to choose gauge size and quantity desired) + black dual wall adhesive lined heat shrink tubing (2 inches of heat shrink tubing per connector).
  • Butt connectors are made of pure copper with excellent electrical conductivity. Tin plated for corrosion resistance. Perfect for marine environments and outdoor use..
  • Dual wall polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 2 inches of heat shrink tubing per connector..
  • Designed to fit solid or stranded wire. Easily connect spliced cables to connectors for a non-insulated seamless connection. Connectors can be crimped or soldered. .
Check Stock

650pcs Heat Shrink Tubing innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2 1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection Safe and Easy Eco-Friendly Material

  • Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition....
  • Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low....
  • Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and....
  • Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink....
  • What You Get: Total 650pcs ratio 2:1 heat shrink tubes, 6 colors (Black, White, Yellow, Blue, Green, Red), 8 sizes. Supplied internal diameter, 1/24",....
Check Stock

180 PCS Heat Shrink Tubing Kit - 3 1 Dual Wall Adhesive Tube - Industrial Marine Shrink Wrap -Waterproof Electrical Cable Wire Kit Set Insulation Sealing Glue inside

  • 【THE WELDING PROCESS IS SIMPLE】: In the process of welding with the industrial heat-shrink tubing, no other crimping tools or welding machines are....
  • 【EXCELLENT WATERPROOF AND SEALING PERFORMANCE】: Shrinking ratio: 3:1. Each shrink tube has glue inside. When you heat it up, the adhesive comes....
  • 【TRANSPARENT PACKAGING AND ORDERLY ARRANGEMENT】: These heat shrink tubing will be arranged in the storage box in an orderly manner, which is very....
  • 【WIDE RANGE OF APPLICATIONS】: The dual wall heat shrink tubing have a wide range of applications. They are all certified electrical connectors.....
  • 【VARIOUS SIZES】: Our shrink tubing for wires contains seven different commonly used sizes, ranging from 3/32" to 3/4", and a comprehensive size....
Check Stock

Wirefy Heat Shrink Tubing Kit - 3 1 Ratio Adhesive Lined Marine Grade Shrink Wrap - Automotive Industrial Heat-Shrink Tubing - Black Red 200 PCS

  • 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation..
  • VARIETY OF SIZES - We have included larger diameter heat shrink tubing ranging from 1/8" to 1". Shrink tubing is precut to 1.75 inches..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Professional connections made in seconds..
  • DUAL WALL TUBING - Outer wall provides abrasion resistance. Inner wall creates waterproof seal and strain relief..
Check Stock

2 inch Diameter 3 1 Waterproof Heat Shrink Tubing Kit Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube Insulation Sealing Wear-Resistant Cable Protector by YUKSY 4ft Black

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance.....
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and....
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink....
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and....
  • Multiple Size - This is 4 feet long 2" in diameter large heat shrink tubing (Note: it is 2" in round diameter, but not 2" in width). Other sizes also....
Check Stock

ZhiYo Heat Shrink Butt Connectors - Electrical Wire Connectors Kit - Insulated Waterproof Marine Automotive Wire Crimp Terminals - AWG 22 – 10 3 Sizes Butt Splice (50PCS)

  • 3:1 Shrinkage Tubing: Dual-walled design, flame-retardant & waterproof. The inner wall of the heat-shrinkable tube has enough hot melt adhesive to ensure waterproof performance reliability. Can be used underground.
  • 0.8mm Thick Copper Core: Heat shrink butt connectors use a copper core with a higher thickness rating, providing minimal voltage drop, high current flow, less heat, and resists corrosion.
  • Easy Identiication: Tubings of varying colors with easily recognizable wire gauge markings. Simply measure the wiring, and by checking the mark of wire gauge of the polyolefin tubing, then you can quickly choose the right connector.
  • High-quality Heat Shrink: Translucent heat shrink tubing provides high tensile strength and resistance to stretch and minimize mechanical damage. And the tubing does not shrink in length when heated.
  • Wide Applications: Perfect for marine, automobile applications, Home or scientific project. Kit Include: Red 22 - 16 AWG (25 pcs), Blue 16 - 14 AWG (15 pcs) and Yellow 12 - 10 AWG (10 pcs). Different size meet your different need.
Check Stock

Swpeet 300Pcs Copper Ring Terminals Open Barrel Wire Crimp Copper Ring Lugs Terminal Connector with 2 1 Heat Shrink Tubing Assortment Kit OT 5A 10A 20A 30A 40A 50A 60A 100A

  • ★ HIGH QUALITY ---- Ring Terminal are Made from pure copper with good conductivity widely used in the electrical wire connecting, Heat Shrink Tubing....
  • ★ PRODUCT SPECIFICATIONS ---- High Quality Open Barrel Wire Crimp Copper Ring Lugs Terminal and Heat Shrink Tubing Kit. Copper Ring Lug Terminals:....
  • ★ WIDE APPLICATIONS ---- The Open Design is Easier to Crimp and Solder Than the Standard Closed Sleeve Type, Make Your Own Battery Cable, widely....
  • ★ WHAT YOU GET ---- In this kit, We have not only prepared Ring Terminal, but also have Heat Shrink Tubing. Including 185Pcs.
  • ★ WITH STORAGE BOX ---- Come along with the plastic box enable the user easy to store and carry these terminals.We are totally committed to....
Check Stock

MILAPEAK 270 PCS Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Automotive Industrial Heat-Shrink Tubing - Black, Red

  • ★【Versatile & DIY Helper】- Multiple sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★【Safe & ECO-Friendly】- Our heat shrink tubes are both UL & CSA certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, Formaldehyde (HCHO) Free, protect you and your famaily..
  • ★【Customized Protector】- Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you and your kids DIY..
  • ★【Fast & Easy Use】- Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heatin....
Check Stock

2 Pcs 3/4 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Cable Protector by YUKSY (4ft, Black & Red)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 3/4" in diameter large heat shrink tubing black and red (Note: it is 3/4" in round diameter, but not 3/4" in width). Other sizes also a....
Check Stock