Top Heat Shrinkable Straight Joint

530Pcs 18650 Insulator Ring and 500Pcs (29.5mm10 Colors)18650 FlatFire Retardant PVC Battery Wrap Heat Shrink Tube for 18650 Batterie

  • 1. High quality PVC heat shrinkable tube of battery has excellent environmental protection, heat insulation, stable performance and rapid shrinkage. 5 mm, shrinkage temperature: 80 ℃, shrinkage rate: ≥ 48 ± 5%.
  • 2、 Length 72.5MM/2.85inch and width29.5MM/1.16in Round diameter: Φ18.7mm/0.74in 500个 PVC heat shrinkable tubes in 10 different colors, 50 in each color. Note: please put the product in a cool and dry place to avoid deformation caused by high temperature.
  • 3.Good insulation,corrosion resistance,tear resistance and wear resistance it have waterproof function.
  • 4.Safe and stable,better protection to avoid battery shorts,easy to peel and paste.
  • 5.Insulating ring Outer ring diameter: Φ18mm. Inner ring diameter: Φ10mm the thickness is 0.18MM.
Check Stock

DIY Battery Pack PVC Heat Shrink Wrap Tube,Length 3M Flat Width 150±1MM for Big Battery Pack Power

  • 1.Heat Shrinkable Tubing Thicknessl is 0.15MM,Length is 3M..
  • 3.Warm Reminder :Battery Heat shrink Tubing Width is 150±1MM .So Pls calculate ur battery pack or mechine size exactly,IF not ,it will too big or small .coz I hope i dont waste ur time and hope u have a Happy Shopping..
  • 4.PVC Heat Shrink Tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics. When exposed to heat in excess of102 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly andȀ㯸Ȁ㯸 ⾯Ȁ䃸Ȁ䃸 クȀ磸Ȁ磸 ㆯȀ铸Ȁ铸 ㊯Ȁ꛸Ȁ꛸ ㎯Ȁ췸Ȁ췸 㒯Ȁ铹Ȁ铹 㖯Ȁ당Ȁ당 㚯Ȁ볹Ȁ볹 㞯Ȁ퓹Ȁ퓹 㢯 㢯.
  • 5.Shrinkable Plastic Tube Sleeve ,Applications include insulation and jacketing of batteries, capacitors and similar objects-a vast range of applications in the production of industrial equipment, toys, sporting goods, electronics, and consumer products..
Check Stock

3/4 18FT Heat Shrinkable Braided Tubing Tightly Woven Shrink Sleeve Flexible for Bundles Automobile & Marine Rubber Hoses Harness Wiring

  • 【Shrinkable Braided Material】 Our heat shrinkable braided tubing consists of tightly woven polyester multi-fibers and specially modified polyolefin filaments, making it the only shrinkable fabric of its kind. This unique weave structure makes it very flexible and can be bent and deformed at will without affecting its use. It is particularly suitable for installation on irregularly shaped or oddly shaped objects, providing secure wire loops or end protection for braided sleeve items..
  • 【Tight & Strong Shrinkage Performance】 Our heat shrink braided tube automatically shrinks to 1/2 of its original size when it reaches shrinkage temperature, increasing the inner wall thickness of the tube and greatly enhancing the tightness and protection of the tube. No additional fixing is needed to tightly bind the cable bundle and effectively prevent it from slipping off. Excellent firmness and protection for the parts to be enclosed..
  • 【Exceptional Abrasion & Cut Resistance】 Our heat shrink tubing has a tightly woven structure that makes the product highly flexible and provides excellent protection against abrasion, chaffing and cutting. This special weave structure will not come apart at the cut even if it needs to be cut or slit. Ideal for protect....
Check Stock

Saladulce Electric PVC Capsule Shrinking Machine SS Wine Bottle Capsule Heat Shrinker Thermostatic Digital Display for 70mm PVC Capsules (110V)

  • 【Application】Suitable for shrinking the heat shrinkable cap onto the wine bottle. Widely used on PP/PVC heat shrinkable capsules of wine bottles, soy sauce vinegar bottles and olives oil bottles and so on..
  • 【Simple Operation】Stainless steel material, simple in construction, easy to handle the heating. Automatic thermostat, real temperature can be displayed in time, easy to do..
  • 【Temperature Setting】Press SET to start the setting, press the left arrow to choose the single digit, the ten-digit, or the hundred-digit, then press the up/ down arrows to adjust the desired number, finally press SET to confirm..
  • 【Note】The diameter of the heating hole is 70mm, suitable for wine bottles with a mouth diameter less than 70mm (2.76 in)..
Check Stock

12PCS 6x3/8 Tinned Copper Ring Terminal Connectors 6 AWG Heavy Duty Battery Cable Ends Bare Copper Lugs with 12 PCS 3:1 Heat Shrink Tubing for Vehicle Boat Marine Use

  • In this kit,we offer 12pcs 6awg heavy-duty lugs with a 3/8 screw size ring,corresponding matching 3:1 red and black heat shrinkable tube..
  • The ring terminal connector made of high-quality copper content of 99.95%,good electrical conductivity.The 3:1 shrink tube is well made of high quality environmental material,thick and durable..
  • The wire lugs connector can be easily crimped or soldered,the heat shrink fit solid or stranded gauge wire,heat shrink provides tight and full seal,prevents leakage of any solder..
  • The ring terminal connector application areas:military/aerospace,household appliances,lighting electronics,automotive electronics,new energy,the 3:1 adhesive-lined heat shrinkable tubing black and red,can be applied in industry,environmental protection material..
  • If you receive a defective product or have any problems with the product,please feel free to contact us,We will provide you with satisfactory service at any time..
Check Stock

Hotop 150 Pieces Solder Seal Wire Connector Heat Shrink Butt Waterproof Insulated Electrical Splice Terminals Automotive Marine for Boat Trailer (Red,22-18 AWG)

  • What will get: the package comes with 150 pieces of 22-18 AWG red heat shrink butt connectors with heat shrinkable, waterproof and conductive properties, which are sufficient to meet your various needs.
  • Insulated and waterproof: the electrical wire terminal comes with outer polyolefin tube and inner hot-melt ring, which can effectively improve waterproof performance, so it is very suitable for the automotive and marine industries.
  • Easy to use: you can just put 2 stripped wires into the solder sleeve and heat it with a hot air gun, and the insulating tube will shrink with a shrinkage ratio of 2:1 to form a waterproof seal, so as to complete the connection.
  • Practical design: these solder seal wire connectors are different from ordinary heat-shrinkable tubes, designed with solder ring and do not need crimping.
  • The solder seal terminals are transparent and can be accurately inspected when the wires are stripped and inserted inside.
  • Scope of usage: the insulated butt splices are useful tools to provide protection for wires, which are often applied in automobile, ship, marine, motorcycle and vehicles, and also applied for scientific wiring projects.
Check Stock

XccMe Sublimation Oven Machine 24L 110V 1400W Convection Oven for Sublimation Blank Mugs, Cups, Water Bottles Batch Sublimation Printing with Silicone Pad, Heat Resistant Tape，Oven Glove

  • ...he paper around the cup and tighten it with heat shrink. The third step is to put it into the oven, set the oven temperature to 300℉, heat the upper and lower tubes at the same time, and set it for 8 minutes. The fourth step, take out the tumbler from the oven, wait for the tumbler to cool down, tear off the heat shrinkable film and paper, and the sublimation is completed..
  • 【Satisfaction Guaranteed】: If you have any questions about this product, you can contact us by email, we will reply you as soon as fast within 24 hours and solve your problem..
Check Stock

1 inch x 180 feet Black Heat Shrink Tape'Non Adhesive'

  • 1" by 180 feet of Black (mate) Heat Shrink Tape.
  • None adhesive quick heat shrinkable tape.
  • Tape will shrink by applying 105c/220f heat or above.
  • Heat can be applied by regular and commercial heat blowers.
  • Suitable for broken wiring or where insulation is needed.
Check Stock

Ignition Switch with Key, 4 Position Universal Key Ignition Switch 12v for Car, Truck, Tractor, Trailer, Forklift, and More, Acc/Off/IGN/Start

  • 【Ignition Switch with Key】Universal Key Ignition Switch compatible with car, truck, tractor, trailer, forklift, and more equipment. Rated 30A at 12v DC..
  • 【4 Position Acc/Off/IGN/Start】4 Position Ignition Key Switch controls 4 functions, Acc/Off/IGN/Start. Come with a pack of heat shrinkable sleeves, easy to connect wires..
  • 【Premium Quality】The ignition switch is made of high-performance ABS and high-quality brass, with safety, durability and excellent conductivity..
  • 【Easy to install】Designed with a screw lock-nut, simply connect wires to the appropriate stud. Note: this switch does not need to be grounded. Your loads connected to the switch need to be grounded..
  • 【Package List】Package includes 1* ignition switch, 2* keys, 1 pack of heat shrinkable sleeves. pls contact us freely if you have any questions for our ignition switch with key..
Check Stock

Pastall Non Insulated Butt Connectors Kit 200pcs 22-10 Gauge Uninsulated Butt Connector 22-18AWG, 16-14AWG, 12-10AWG, Electrical Wire Crimp Ferrule Terminals with 45pcs Heat Shrink Tube

  • Good non insulated butt connectors: Made by high quality red copper, has good electrical conductivity. with tin plated on the surface, better anti-oxidation and corrosion resistance performance..
  • High Performance Wire Ferrule Cable Crimp Terminal : These butt connectors easy to connect with electrical wire, Wire stop structure is nice to insertion wire in right space, and make sure the effect of compression..
  • Easy to use: Make the wire connection easier and stronger, no matter whether you use it in home circuits, car repairs, motorcycle repairs, etc., making the work easier and more efficient..
  • 45pcs heat-shrinkable tubes: this connector kit has three sizes of connectors with 45pcs heat-shrinkable tubes..
  • Package Include: include 80pcs 22-18AWG, 60pcs 16-14AWG, 60pcs 12-10AWG total 200pcs Non-Insulated Butt Connectors packed in a plastic box, easy to store and carry..
Check Stock

OMT Inner CV Axle Puller Tool Set with 5/8"-18 Slide Hammer & Adapter | Inner CV Joint Removal Tool Kit | Front Wheel Drive Axle Puller Set Compatible with Taurus Sable FWDs from 1986 to 2021

  • ...Motor Tech is compatible with Ford Taurus and Mercury Sable models from 1986 to present, loosening and removing their front wheel drive axles and hidden retaining rings in minutes.
  • MULTIPURPOSE SLIDE HAMMER: Our slide hammer weighs 7 pounds for extra strength to give you a straight and even pull for damage-free removal of the axle assembly.
  • its threading also lets you use it with other 5/8"-18 adapters to deal with other makes and models or to handle other work around your engine.
  • DURABLE PULLER ADAPTER: The U-shaped CV joint fork has a 2-inch opening and 2.4-inch depth to firmly lock onto your Sable or Taurus axle assembly, making removal of stuck CV joints a cinch.
  • QUICK & EASY OPERATION: These automotive tools work together to provide straight and even force so your constant velocity axle pops out smoothly, leaving the roller bearing inside the joint and the rest of your vehicle untouched.
  • BUILT TO LAST: Made of premium AISI 1045 medium carbon steel, our CV joint removal set provides strong and dependable service for the long haul.
  • heat treated and blackened or chrome p....
Check Stock

Lot 200pcs Heat Shrink Links Ring Glue Lined Tubes For Hair Extensions 6mm

  • Shrinkable tube is used to connect with I-tip hair extensions.
  • Glue lined for a tighter,stronger and longer lasting bond.
  • Applied to hair using a fusion heat connector/shrinks around extension once heat is applied..
Check Stock