Top Heat resistant Ptfe Tube

Authentic Capricorn PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet Clips

Compatible with Creality 3D printer:Ender-3 all series,Ender-5 all series,Ender-6,CR-10,CR-10S,CR-10 V2,CR-10 V3,CR-10 S4,CR-10 S5.(Other models are....
The Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament..
Pneumatic joint and the circlip has good elasticity and durability. It can be pulled out gently by simply pressing the oval release ring. The most....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
The package includes: 1pc imported Teflon tube, 4pcs mold springs, 1pc air cutting tube, 2pcs pneumatic connectors M8, 2pcs pneumatic connectors M6,....

Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....

Check Stock

Archetype QIDI Technology High Temperature Stainless Steel Nozzles with High Temperature PTFE for All QIDI TECH 3D Printers All Sizes (2pcs) (36mm (X-Max/X-Plus/X-One/Qidi Tech I))

QIDI TECHNOLOGY High Temperature (.4mm) Stainless Steel Nozzles & High Temperature Capricorn PTFE Tubing..
Wear resistant Stainless Steel Nozzles & Capricorn PTFE - regarded as the highest quality to withstand printing High Temperature filaments such as ABS, Nylon, Poly-carbonates and more..
Available for ALL QIDI Technology 3D Printers & ALL PTFE Sizes (i-Fast/i-Mate/i-Mates/X-Max/X-Plus/X-Pro/X-Maker/X-Smart/X-One/Qidi Tech I).
Package includes: (2Pcs) Stainless Steel Wear Resistant Nozzles - (0.4mm) (2pcs) Capricorn PTFE tube: (All Sizes).
Same Day Shipping before 2:00 P.M. Central Std. Please feel free to contact us at any time for additional Nozzle and PTFE sizes. We will gladly provide custom solutions tailored to any request. We will reply to you within 24 hours..

Check Stock

SIQUK 5 Pieces Teflon Tube Blue PTFE Tubing 1M with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Fitting Connector for 3D Printer 1.75mm Filament

【Capricorn PTFE Tubing】100% Original Capricorn Bowden PTFE tube with the lowest friction on the market. Less friction means more responsiveness,....
【0.4MM Nozzles】Made with centering CNC precision automatic lathe and one-time forming technology, make sure the interior of the 0.4mm nozzle is....
【Upgraded Pneumatic Fittings】Two PC4-M6 Couplers for the extruder, made of premium copper and plastic, are sturdy and durable. Two PC4-M10....
【Die Bed-level Springs】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They....
【Official Creality 3D Store】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please....

Check Stock

uxcell a12100600ux0244 J Type 90mm x 1.5mm Temperature Controller Earth Thermocouple Probe 2M

Package: 1pc 2m Teflon PTFE Tube, necessary 3D printer parts..
Size: 3x4mm (IDxOD), Fit for 3mm filament.
Function: Used for 3D Printer J-head hotend RepRap Rostock Bowden Extruder Long Distance Feeding..
Material: Made of PTFE material, With smaller friction coefficient in plastic, is an ideal oil-free lubrication material..
Feature: Corrosion Resistance, High and Low Temperature Resistant, Self-Lubricating, Non-Sticky Surface..

Check Stock

Creality Capricorn Bowden Tubing Upgrade 1M Capricorn PTFE Teflon Tube for 1.75mm Filament of Ender 3/3 Pro/5 CR-10 4pcs Hot Bed Mold Springs 2 Pair Pneumatic Coupler 1 Clipper 5pcs 0.4mm Nozzles

100% Original Capricorn XS Series tubing..
Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..

Check Stock

Ruler Metal Straight Edge Ruler Stainless Steel Ruler 6 Inch 12 Inch 16 Inch Ruler Set Rulers Bulk Set of 3

【GOOD QUALITY Tshirt Alignment Tool 】T-shirt ruler guide for vinyl set contains 4 different sizes rulers, 2 Rolls Heat Resistant Tape and 3 Packs PTFE Teflon Sheet Included. Help you to make alignments and save time on center your designs..
【Enjoy DIY Fun】Reart T-shirt Alignment Tool will help align designs to shirts and is helpful for getting prints aligned perfect every time! Don't have to worry about things not being centered anymore!Numbers and markers are clearly on the ruler that is easy to read against any shirt color..
【Heat Resistant Tape】Heat Tape perfect for protecting sensitive printed circuit board (PCB) components such as gold fingers when wave soldering, This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press..
【3 Pack PTFE Teflon Sheet】Heat Resistance & Non Stick- Heat press transfer sheet allows high temperature resistance up to 600 °degrees, protect your working surface,perfect for heat press..
【100% SATISFACTION】Please contact us for any questions. We will reply....

Check Stock

100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters

【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..

Check Stock

MaxSen Deck Mount Single Hole Double Handle Pull Out Spray Commercial Pre Rinse Restaurant Kitchen Faucet (MS-5801A)

【Single Hole Deck Mount Commercial Faucet】Heavy Duty Brass Faucet Body..
【UPGRADE! No-screw design Spay Valve】1.42GPM (5.38LPM) Water Saving Spray Valve..
【Brass Kitchen Faucet】Brass Compression Cartridges with spring check to prevent cross flow.
【Easy Installed Faucet】Built-in water sealing washer , no need to apply PTFE tape..
【Kitchen Sink Faucet with Sprayer】Durable Pressure and Heat Resistant Stainless Steel Hose With Food Grade Polyurethane Inner Tube..

Check Stock

Creality Capricorn Bowden PTFE Tubing XS Series 1 Meters 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Ender 3 Ender 3 Pro Ender 3 V2,Ender 5 CR-10/10S 3D Printer

Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
If you have any question,please feel free to contact,we will help you.

Check Stock

YiiMO Smoke Tube for Pellets 12 Pellet Smoker plus Fiberglass BBQ Grill Mat Heat Resistant

Perfect for cooking fish, shrimps, meats, steaks, veggies and other items without them sticking or falling through the grill grates With non-sticking....
Heat resistant up to 260℃ (500℉) without burning. Suitable for electric grill, charcoal grill, gas grill, pan and oven, and it can be cut to....
Reusable and easy to clean with soap and detergent, dishwasher safe Size: 16"X12"/40x30cm..
Made from non-stick PTFE coated fiberglass mesh, PFOA-Free, no chemical smell and can contact with food directly, you can rest assured to use.

Check Stock

Dovov Heat Press 15x15, Clamshell Heat Press with Digital Controller, Sublimation Heat Press Machine for T shirt

Fine Pattern Presentation: The heating plate of Dovov heat press 15x15 is triple polished, with high-quality PTFE spraying, smooth and non-stick ink, so that the transferred pattern has clearer details..
Even Heat Distribution: The heating tube is 20% thicker to 0.63 inches, and the third generation of heating tube arrangement controls the global temperature difference of the heating plate within 15 °F/8 °C..
Precise Digital Control: Intelligent temperature control boxes and sensors accurately control the gap between the set temperature and the actual temperature at 13°F/7°C. Setting range: 0-482 degrees Fahrenheit, 0-999 seconds, Power: 1400w..
Safe and Durable: the double-layer metal grip load-bearing reached 450KGF, eliminating the possibility of grip breakage in daily use.
the opening angle reached 45-50 degrees, which is convenient to take and place clothes, not easy to be burned.
overheating automatic closing device to avoid fire and other accidents..
Easy to Use: The temperature range of Dovov heat press machine is suitable for a wide range of situations such as cotton, linen, fabric, heat transfer, heat sublimation, etc., and the 15x15-inch plate size can also meet the vast majority of heat press jobs..

Check Stock