Top Heating Manifolds

GM 4.3L Turbo Kit Hot Parts T3 Cast 4.3 GMC Chevy Turbocharger V6 Wastegate Oil

  • Fantastic design places turbo on the passenger side, very strong manifolds.
  • Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock

apel High Performance RTV High-Temp Silicone Gasket Maker and Sealant Heat Resistant from 104ºF to 572ºF Red, 10.2 oz.

  • ...sed in sealing the stoves, applications where high heat resistance is required such as heating devices, pumps and motors, chimneys, hot water boilers, electric home appliances, rear main bearing cap split line, automatic transmission pan, case halves and inside cover, damper keyway sealing, differential cover, manifolds, oil pan corner seals, thermostat, transmission pan, valve cover gasket, water pump cover gasket, exhaust manifold & connection points..
  • PRODUCT FEATURES : It is cured acetoxy system and when cured formation of a flexible silicone gasket can be observed. Excellent bonding to wide range of applications, resists cracking, shrinking and migration caused by thermal cycling, resistance to oil, water & toxic chemicals, pressure resistant, makes air tight & leak proof gaskets in seconds..
  • EASY TO USE : Waterproof, gasket & seal on most surfaces. Forms to any shape instantly, it will not shrink or crack, high resistance and fast curing properties. It is very resistant to the physical strain after being cured. Superior adhesion & flexibility..
Check Stock

Drip Depot 4 Zone 1\ PVC-Lock Push to Fit Manifold Kit

  • The unique design of 8 manifolds, with 3 plugs, no need to use so many manifolds for closed management..
  • There are fixed ports on both sides, which are convenient to fix after installation..
  • High temperature resistance, corrosion resistance, aging resistance, and more durable to use..
  • There is a plug at the other end of the straight line. If the connection is needed, just pull out the plug..
  • Applicable to spa massage, hot spring, swimming pool, bathtub massage, etc..
Check Stock

Exhaust Bellows Replace Mercruiser 3-4' 70981A3 Sierra 18-2762 Mallory Marine 9-72808

  • Upper Exhaust Bellows for Mercruiser 3-4" 70981A3 3.0 3.7 5.0 5.7 18 2762 89070.
  • 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
  • After market Ref:Mercruiser:70981A3,Mallory Marine: 9-72808,Sierra: 18-2762,GLM: 89070.
  • Installs on to 3 inch 15 degree center mounted risers with 4 inch elbow.
  • used: 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
Check Stock

Wilmad-LabGlass IG-357-100 Air-Tite 4-Place Double Vacuum Gas Manifold

  • The unique design of 8 manifolds, with 3 plugs, no need to use so many manifolds for closed management..
  • There are fixed ports on both sides, which are convenient to fix after installation..
  • High temperature resistance, corrosion resistance, aging resistance, and more durable to use..
  • There is a plug at the other end of the straight line. If the connection is needed, just pull out the plug..
  • Applicable to spa massage, hot spring, swimming pool, bathtub massage, etc..
Check Stock

2 Manifold Coupler Kit Old Plumbing to New Hot Tub Spa Part for 1-2 Manifolds

  • 2" Manifold Coupler Kit Old Plumbing to New Hot Tub Spa Part for 1-2 Manifolds.
  • This Kit consists of (1) 2" Coupler, 2"Slip X 2"Slip (6") of 2" Flex Pipe, (1) 1/4 Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's....
  • This kit is used to Connect a New 2" Manifold to old 2" Flex or Hard Pipe.
  • This Kit is enough glue to install 1-2 Manifolds.
  • To see our You Tube Video about this kit search for "Spin It to Win It Coupler Kit Plumbing Hot Tubs How To The Spa Guy".
Check Stock

10 inch Sprinkler Valve Box Cover in ground Valve Box Cover Lid Replacement for Circular Sprinkler System Irrigation Control Valve Box,1 Piece

  • The outer diameter of the sprinkler valve cover is 10"..
  • Sprinkler valve box lid with high quality durable plastic, with strong bearing capacity,enough for many years of use..
  • Irrigation valve box cover perfect for sprinkler valves or drip manifolds, flush with the grass , they don't get suck up in the mower..
  • Just snap irrigation valve box cover lid on sprinkler system valve box ,to protect sprinkler valves or drip manifolds, etc..
Check Stock

JEM&JULES Carburetor Intake manifolds CX500 w/boots gaskets for Honda Carb Holders kit

  • ★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fitment: for 1978-1979 Honda CX500 1979-1982 Honda CX500C 1979-1981 Honda CX500D.
  • ★Intake boots become dried out and cracked over time causing air leaks which lead to lean running engines that prematurely fail. Replaces dried out, cracked intake manifolds that can cause engine failure. Give your machine the new power and torque it really deserves, and have more fun with the power at your finger tips..
  • ★Please check pictures for more details, and check your part number and our fitment before placing an order.
  • ★1 set of 2 Brand new Aluminum carb manifolds rubber boots and orings (1 BID = SET OF 2 HOLDERS).
Check Stock

ANCEL S100 Automotive Smoke Machine | EVAP Service Port | Small Vacuum Leak Detector Tester | Fuel Pipe Diagnostic Tester for All Car/Motorcycle/Boat/Snowmobile/Light Truck

  • ...FIND ALL SYSTEMS OF LEAKS】Most 0.8-1 air pressure automotive smoke machine are not diagnostics with EVAP system, but the ANCEL S100 is quipped with the standard air pressure will not damage the evap system is a most recommended smoke tester can adapt of EVAP Systems, Vacuum Leaks, Low Pressure Turbo Leaks, Intake Manifolds, Cooling/EGR/Exhaust Systems diagnostics and solve these troubles quickly!.
  • 【BUILT-IN HEATING ROD】Equipped with ANCEL's forefront technology -- isolated heating transmission device, which ensures to protect the internal parts from heat, which greatly extends the service life. When the operating temperature of the machine exceeds 75°C, it will shut down automatically. After many tests, please rest assured to use. This effectively ensures the safety of each car owner..
  • 【POWERFUL ADJUSTABLE SMOKE】The S100 smoke machine tester is environmentally friendly and harmless and adjustment screw on the side is a flow meter that controls the amount of smoke, ensuring that the output of the smoke can detect even the smallest leaks and helps you diagnose faults quickly and accurately. Significantly improves the efficiency of diagnosis..
Check Stock

ANCEL S100 Automotive EVAP Smoke Machine Leak Detector ANCEL AD410 Enhanced OBD II Vehicle Code Reader

  • FIND ALL TYPES OF LEAKS: The S100 smoke leak detector can do the following work - EVAP systems test, vacuum leaks, low pressure turbo leaks, intake manifolds, cooling exhaust systems, door & windows seals, EGR system test, various pipe fittings test, oil leaks, and more!.
  • POWERFUL SMOKE: Equipped with ANCEL's latest smoke generator and 1/2PSI high pressure unit, which ensures continuous output of a large amount of smoke. The dense smoke output detects even the smallest leaks and helps you diagnose faults quickly and accurately. Significantly improves the efficiency of diagnosis..
  • HIGH- QUALITY PERFORMANCE: High temperatures are generated during the operation of the smoking machine, which will cause the internal parts to permanently disintegrate at high temperatures and the machine will stop working. Therefore, the S100 smoke machine uses a solid, thick metal structure to protect the internal parts from heat, which greatly extends the service life..
  • SMALL SIZE : Most smoking machines are relatively large, which is a hindrance when transporting and storing them. This machine weighs only 3 pounds, is small and lightweight, making it not only easy to store, but also easy to transport. It is an indispensable tool for any car owner..
Check Stock

Air Manifold, 5 Way 8 Port Air Compressor Manifold, Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Manifold Air Distribution Block, NPT 1\\/4 Inch Supply Port, NPT 1\\/4 Inch Output Port

  • Bring Convenience: When your air compressor need to feed several different systems, this product is what you need. Rather than being forced to constantly change connections, you can instead a single hose with this manifold of multiple ports, a really functional product..
  • Excellent Quality: The air manifold is made of aluminum alloy, which is highly corrosion-resistant, not easy to deform, durable and lighter than other material. The ports are based on standard size for easy mounting..
  • Working Parameters: The working pressure is 0-1MPa, maximum working pressure is 1.2MPa, working temperature is 32 - 140 °F. If you want to know more about the products, please feel free to contact us..
  • Easy to Use: Unlike other manifolds on the market, our air manifolds are all designed with NPT threads instead of PT threads or G threads, so the fit is tighter, no air leakage and easy to mount. Each port is well arranged for enough space..
  • Wide Application: It is suitable for the situation when multiple tools need to access an air compressor, so it is widely used for air compressor, cylinder, vacuum engine and other similar system, or used as supporting parts of machine equipment..
Check Stock

Air Manifold, 5 Way 7 Port Air Compressor Manifold, Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Manifold Air Distribution Block, NPT 1\\/2 Inch Supply Port, NPT 1\\/4 Inch Output Port

  • Bring Convenience: When your air compressor need to feed several different systems, this product is what you need. Rather than being forced to constantly change connections, you can instead a single hose with this manifold of multiple ports, a really functional product..
  • Excellent Quality: The air manifold is made of aluminum alloy, which is highly corrosion-resistant, not easy to deform, durable and lighter than other material. The ports are based on standard size for easy mounting..
  • Working Parameters: The working pressure is 0-1MPa, maximum working pressure is 1.2MPa, working temperature is 32 - 140 °F. If you want to know more about the products, please feel free to contact us..
  • Easy to Use: Unlike other manifolds on the market, our air manifolds are all designed with NPT threads instead of PT threads or G threads, so the fit is tighter, no air leakage and easy to mount. Each port is well arranged for enough space..
  • Wide Application: It is suitable for the situation when multiple tools need to access an air compressor, so it is widely used for air compressor, cylinder, vacuum engine and other similar system, or used as supporting parts of machine equipment..
Check Stock