Top Heavy Duty Oil Cooler Kit

Coldbreak - 1T-RRR Jockey Box, 1 Tap, Roto Molded

  • The beverage line coming from your keg connects to this jockey box on the rear of the cooler.
  • All stainless steel construction. Reinforced coil to shank assembly designed to prevent blowouts.
  • Heavy duty shank washers allow you to properly tighten your faucets and hold custom tap handles.
  • Every jockey box is hand-built in Michigan by COLDBREAK and backed by our warranty.
  • Includes stainless steel faucet and black tap handle.
  • Does not include dispensing kit (sold separately).
Check Stock

Quictent 24X24FT Large Oversized 185G HDPE Square Sun Shade Sail Canopy 98% UV Block Outdoor Patio Garden with Hardware Kit

  • ... 5 years under normal use and weather..
  • ✔【98% UV Protection and Sunlight Blocked】Heavy Duty 185GSM polyethylene shade cloth! Provide a great shade! Up to 98% UV rays and sunlight blocked. You can enjoy pleasant natural lighting without being roasted, sunburned or worrying about skin burns..
  • ✔【At Least 20℉ Cooler Under Shade Sail】It's a prime choice for "cool shade". At leat 20 degree cooler under Shade. Perfect for garden, entrance, patio and yards... Can be used for both residential and commercial applications..
  • ✔【Heavy Duty Double Layered Edges】Prevents frayed edges and out of shape. Each corner ends with 316 stainless steel D-ring for easy hanging, extra heavy stitching to help the D-rings strongly attached to the shade sail..
Check Stock

IPR Socket Tool Screen Kit - Compatible with Ford Powerstroke 6.0L Vehicles - F-250, F-350 Super Duty, Excursion, E-350 - Replaces 3C3Z9H529A, 904-415, 3C3Z-9H529-A, Injection Pressure Regulator

  • ... | 2004 - 2010 E350 Super Duty | 2004 - 2010 E450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F250 Super Duty | 2003 - 2007 F350 Super Duty | 2003 - 2007 F450 Super Duty | 2003 - 2007 F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The oil system usually gets contaminated when the oil cooler is serviced or replaced and has not been cleaned properly..
  • Replaces Part# 3C3Z9H529A, 904-415, 3C3Z-9H529-A, 904415 commonly found on popular models with the Diesel Powerstroke 6.0 engine including year models 04, 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then your IPR valve screen and seals may need replacing.
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement manufactured by AA Ignition and will fit, work and look exactly like the factory screen and seals found on your 6.0L Powerstroke vehicle. This kit also includes a socket tool specially made for removal and installation of your IPR valve which has a protruding electrical connector..
  • Lifetime Warranty - This replacement IPR tool and screen kit manufactured by AA Ignition comes complete with ....
Check Stock

Radiator - Compatible with 1975-1980 Toyota Land Cruiser FJ40 From 02/1975

  • Compatible with or fits: (Note: Heavy Duty All Metal) 1977 - 1980 Toyota Land Cruiser FJ40.
  • Compatible with or fits: (Note: Production: From 02/1975, Heavy Duty All Metal) 1975 - 1976 Toyota Land Cruiser FJ40.
  • OE-Equivalent ~ Direct fit for easy installation. ~ OE Style mounting brackets and hose connections. ~ Integrated transmission oil cooler when....
Check Stock

E&K Sunrise Reinforcement Large Sun Shade Sail 20' x 26' Rectangle Heavy Duty Strengthen Durable Outdoor Garden Canopy UV Block Fabric (260GSM)- - Turquoise Green

  • ✔【 Hardware Kit】High quality 316 marine grade stainless steel hardware kit. Help to build and install your shade sail awning to proch, tree, pole, roof, stucco wall, brick wall and so on. Relatively quickly and easily. Make the shade sail to be sturdy enough to hold up to wind, light rain(permeable, not waterproof )..
  • ✔【 Last 5 Years】100% new HDPE (Non-recycled). Heavy Duty polyethylene knitted fabric material. Preventing shade sails from dried out, tearing and fading. It will last 5 years under normal use and weather..
  • ✔【98% Sunlight Blocked】 Up to 98% sunlight blocked. Provide a great shade! You can enjoy pleasant natural lighting without being roasted, sunburned or worrying about skin burns..
  • ✔【At Least 20℉ Cooler Under Shade Sail】It's a prime choice for "cool shade". At leat 20 degree cooler under Shade. Perfect for garden, entrance, patio and yards... Can be used for both residential and commercial applications..
  • ✔【Heavy Duty Double Layered Edges】Prevents frayed edges and out of shape. Each corner ends with 316 stainless steel D-ring for easy hanging, extra heavy stitching to help the D-rings strongly attached to the shade sail..
Check Stock

Andis 23280 ProClip Super 2-Speed Detachable Blade Clipper, Professional Animal/Dog Grooming, Burgundy, AGC2

  • Powerful rotary motor clipper kit for grooming dogs with heavy coats..
  • Detachable ceramic blade runs cooler and stays sharper..
  • Break-resistant housing and 12' heavy-duty cord..
  • Kit includes durable hard storage case and 4 attachment combs sizes 1/8.
Check Stock

KIMISS Towing Hitch Engine Oil Coolers & Kits, Motorcycle Engine Oil Cooler Oil Cooling Radiator Kit for Honda CB CG 100CC-250CC(85ML-Silver)

  • 【Required accessories】Whether you're using a top-down corner engraving or pulling down a tow, your high speed requires a reliable and efficient cooling system..
  • 【Minimal pressure loss】With minimal pressure loss, the kit uses a large oil drain cooler mounted in the front grille for optimum airflow and cooling..
  • 【Funtion】Cooling the engine temperature keeps the engine within normal operating temperature range, reducing engine load and extending its life..
  • 【Two choices】Invisible black and stylish silver cooler options include pre-assembled stainless steel cords and special mounting brackets for a painless, clean installation..
  • 【Fitment】Motorcycle Oil Cooler System Kit, Fit for Honda GY6 100CC-150CC Engine. Transmission Cooler Mounting Kit Oil Cooler Lines.
Check Stock

FULLET Cooler Wheel Kit for Yeti & RTIC Cooler Carts - 12 Inch Wheels & Ratchet Straps for Coleman Ice Chest – Universal Heavy Duty RTIC/Igloo Wheel Kit with Cooler Accessories for Camping & Beach

  • ✅ A Must Have for Outdoor Enthusiasts: Say goodbye to heavy loads and exhausting pulls during your camping or seaside trips. With the FULLET wheels for coolers your problems are solved. The 12" wheels will help roll your cooler smoothly whenever you need it!.
  • ✅ Perfect Fit and Usability: Unlike similar products on the market, this cooler cart kit accommodates most coolers up to 17.5 inches wide. The 2 pairs of axles can be set to the maximum width of 15.5 to 17.5 inches between the tires. The polyester ratchet straps are designed to withstand the test of time regardless of weather conditions and won’t break like the traditional lashing straps sold by others.
  • ✅ Mounting Hardware Included: This cooler wheel set includes all needed mounting hardware for a user-friendly and hassle-free installation that only lasts a few minutes! The 2 extra slots of the base allow you to place the cooler higher or closer to the ground, depending on your needs..
  • ✅ What You Get: The FULLET 12-inch wheels include all needed cooler accessories for a complete and rewarding experience! In addition to the cooler wheel kit you will rece....
Check Stock

Andis 23085 UltraEdge AGC Super 2-Speed Detachable Blade Clipper with Super Blocking Blade for Cattle & Horses, Blue

  • Powerful rotary motor clipper kit for grooming dogs with heavy coats..
  • Detachable ceramic blade runs cooler and stays sharper..
  • Break-resistant housing and 12' heavy-duty cord..
  • Kit includes durable hard storage case and 4 attachment combs sizes 1/8.
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

Andis EasyClip Pro-Animal 7-Piece Detachable Blade Clipper Kit, Pet Grooming, Blue, MBG-2

  • Quiet operation for ultimate pet comfort.
  • Powerful rotary motor clipper kit for grooming dogs with heavy coats..
  • Detachable Ceramic blade runs cooler and stays sharper..
  • Built TO withstand years of use with a break-resistant housing and 12′ Heavy-duty cord..
  • Kit includes durable hard storage case and 4 attachment combs sizes 1/8″, 1/4″, 3/8″, 1/2″ For longer cutting lengths..
Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock