Top Heavy Duty Torsion Springs

Garage Door Torsion Springs 1.75’’(Pair) with Non-Slip Winding Bars, Coated Torsion Springs with a Minimum of 10,000 Cycles (0.207X1.75''X24'')

  • REPLACE BROKEN SPRINGS：Use this pair of high quality garage door torsion springs to replace old broken garage door springs. It includes stationary and winding cones..
  • HIGH QUALITY PRODUCT:Made of heat treated steel coils with aluminum cones to make sure they are extremely heavy duty.Surface coated black for smoother, cleaner operation and also corrosion resistant and oil tempered for longer life..
  • SERVICE LIFE:For use on doors 7' or 8' high doors with 4" standard lift drums. Engineered for maximum application range. Minimum 10,000 cycles, at +/- 7.5 lbs of target door weight..
  • EASY TO INSTALL:We also offer a pair of unique non-slip winding bars,they will help install new or replace old, rusty springs quickly (professional installation recommended)..
  • DIMENSION:.207” wire size x 1.75” inside dimension x 24” length.IMPORTANT:Please purchase after confirming that the outer diameter,wire diameter and length are totally the same as the original product..
Check Stock

KUNTEC Torsion Bar Unloading Tool Heavy Duty Torsion Key Tool with C Frame Compatible for GMC Chevy Ford Dodge Car Truck Auto

  • FUNCTION: Torsion bar removal tool helps you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • EASY TO USE: Features larger 7/8” diameter anvil casting threads, this Torsion Bar Unloading Tool will make quick and easy work of your suspension job.
  • COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more.
  • QUALITY: This torsion bar tool is built with heavy-duty forged steel, made for use on trucks with heavy duty chassis and a larger torsion bar.
  • ATTENTION: This torsion bar unloading tool can only be used with hand wrench, do not use the impact driver. Grease the threads before using and get the front tires completely off the ground.
Check Stock

KATUR Black Leather Solo Seat 3Inch Spring Mounting Bracket Kit for Harley Harley Honda Yamaha Kawasaki Suzuki Sportster Bobber Chopper

  • The solo seat with spring and bracket mounting hardware fits for most of Harley Honda Yamaha Kawasaki Suzuki Sportster Bobber Chopper and Custom....
  • Spring Height: 3Inch (8mm). Seat Size: 11 3/4"x 9 1/2"(30cm x 24cm). Bracket Size: Overall Length : 7" (17.7cm).
  • New Barrel Type Springs With Excellent Shock Absorption. Triple Chrome Plated For Lasting Technique. Torsion Type design can shock absorption....
  • Heavy duty Steel made of the bracket mounting hardware. Black leather and the neoprene foam made of the Seat. Comes With Traditional Length, Great....
  • Package includes: 1X Motorcycle 3Inch Leather Solo Seat + 1 X Sliding T-Bar +1 X Swivel Bracket + 2 X Solo Seat Springs + Set of Mounting Kit..
Check Stock

BTSHUB Torsion Bar Unloading Tool Key Removal Compatible with GM Chevy Ford Dodge Drop Forged Heavy Duty

  • 【Torsion Key Tool】7/8 inch diameter threads.
  • Large C-frame opening: to accommodate beefier torsion bars.
  • 【Forged steel construction】Torsion bar unloading tool was made for use on trucks with heavy duty chassis and a larger torsion bar.
  • 【High Performance】 Designed to hold the torsion bar while you make adjustments to your vehicle.
  • 【Advantage】Torsion key unloading tool can be positioned on the frame and the torsion bar mount.
  • 【Applications】 Torsion Bar Unloading Tool Key is Compatible with GM.
Check Stock

HDBUBALUS Motorcycle Solo Seat Springs Mounting 2 Inch Spring Bracket Hardware Mount Kit Fit for Harley Sportster Softail XL 883 1200 Dyna Fatboy Bobber Black 1 Pair

  • Color:Black/Heavy-duty spring steel,solid, Metal plating for custom seat use.
  • Universal Fit for Harley Sportster,Yamaha,Kawasaki,Suzuki,Bobber,Chopper and Custom application.
  • Torsion-style springs designed for the optimum balance between spring suspension and support.
  • Easy to install, no cutting, welding, or fabrication is necessary.
Check Stock

HDBUBALUS Motorcycle Solo Seat Springs Mounting 2 Inch Spring Bracket Hardware Mount Kit Fit for Harley Sportster Softail XL 883 1200 Dyna Fatboy Bobber Chrome 1 Pair

  • Color:Chrome/Heavy-duty spring steel,solid, Metal plating for custom seat use.
  • Universal Fit for Harley Sportster,Yamaha,Kawasaki,Suzuki,Bobber,Chopper and Custom application.
  • Torsion-style springs designed for the optimum balance between spring suspension and support.
  • Easy to install, no cutting, welding, or fabrication is necessary.
Check Stock

Halo SLDACCKIT SLD Series Replacement kit, Grey

  • Use for installation of SLDSL4 or SLDSL6 into recessed housings.
  • Includes E26 adapter, torsion springs, & friction blades.
  • Mount torsion springs to SLDSL6 bracket for 5" or 6" housings.
  • Mount friction blades to SLDSL4 bracket for use in 4" housings.
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 60” Pound Lid Support Hinge Soft Close Cabinet Hardware – Bronze Lid Hinge Support - Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding more hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of heavy duty hinges ensure that the seat top raised position is at an over center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock & are easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps on furniture, cabinets, cupboards, or wooden storage boxes when a soft closing is required. hinges are available ....
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 40” Pound Lid Support Hinge Soft Close Hardware for Cabinets – Bronze Lid Hinge Support - Cast-Zinc Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding additional hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of these heavy duty hinges ensures that the seat top raised position is at an over-center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock, & are super easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps of furniture, cabinet, cupboard, or wooden storage boxes when a soft closing is required. Hin....
Check Stock

New! Garage Door Extension Springs - Stretch Springs - PAIR - for 7' high door (Green)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

DURA-LIFT .207 x 2\ x 23\ Torsion Garage Springs (Yellow, Left & Right Wound)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Doors (0.295x2x41). (Black/Right).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications.
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

Porch Swing Springs Heavy Duty Kit (2Pcs -700 Lbs Rust Resistant Hanging Spring Kit for Hammock Chairs Yoga Punching Bag Ceiling Mount Porch Swing or Indoor Outdoor

  • ...ch as hammock chairs or ceiling mount porch swings, yoga, porch swing, hammock, sandbag, hanging chair, desk lamp, awning, sling trainer and so on, an ideal choice for your backyard, house, terrace, balcony and garden.003c/p003e.
  • 003cp003e003cb003e Safety and Stability, Shock Absorption: 003c/b003eHeavy-duty hanging springs are tightly coiled for shock absorption, reduce vibration and gravity. Not only is used for hanging chairs to provide comfortable feelings. Can also be used in industrial applications that need to reduce vibration and avoid shock 003c/p003e.
  • 003cp003e003cb003eHammock Chairs Swing Spring Sets, Feature: 003c/b003ePorch swing springs heavy duty 2 pack, Each end of the swing spring has a rubber tip preventing you from scratching your fingers or hands When you install the spring. In addition, it also prevents hooks from falling off during the installation process003c/p003e.
  • 003cp003e003cb003eEasy to Use:003c/b003e Attach the springs to your hooks or mounting brackets, then attach the porch chain, and the remaining porch chain goes on top of the top hook of the spring as a safety measure. Porch swing springs AKA porch swing springs heavy duty , porch swing springs heavy duty kit, porch swing springs stainless, porch swing springs heavy dut....
Check Stock