Top Heavy Load Power Relay

ARTGEAR Automotive Relays for Car Truck Motor Boat Car Starter - 12V DC 120 Amp Split Charge Relay Switch with 2 Pin Footprint + 2 Terminal

  • 【Continuous Relay】 You can use it as continuous relay, if the relay keeps working for 5 hours, it would be better to stop it and then use it again . It could pass continuous 50A~60A current.
  • 【Package Contains】 1 x Heavy Duty Split Charge 120A ON/OFF Relay.
  • 【Large Capacity】 Up to 120A coil capacity able to handle those high current applications with ease, Heavy duty make or break (on/off) relay.
  • 【Long service life】 Life Expectancy Electrical: 100,000 Operations (at 30 Operations/min) Life Expectancy Mechanical: 10,000,000 Operations, keep a high level in ongoing work.
  • 【Applicable】 High Power automotive relays provide standard contact form, and has the standard 4 pin layout, fit of starter kills, dome light supervision, trunk release, polarity change, power door lock/actuator control etc.
Check Stock

IRHAPSODY 12 V DC 200 Amp 4 Pin Heavy Duty Relay/Split Charge Relay Switch, 4 Terminal Relay

  • coil resistance: 80 ohms. It is more reliable than 2.4W (60 ohms) and 4.8W (30 ohms) relays on the market.
  • Nominal coil voltage: 12V, Pickup voltage: 8V, Dropout voltage: 1.2V, Maximum applied voltage: 14V.
  • Heavy duty 12 volt 4 Pin SPST (Single Pole Single Throw) relay.
  • Large capacity: 200a high current carrying capacity, heavy duty make/break relay.
  • Ideal for split charging or any vehicle needing a high power relay.
Check Stock

dstfuy Remote Control Switch,1500M Long Distance,AC 110V/120V/240V /40A Relay Wireless RF Switch,Wireless Remote Switch for High Power Water Pump Motor Lighting Electrical Equipment.(4900FT 110V)

  • HIGH POWER LOAD:The Relay adopts 40A relay, which can load high-power electrical appliances to ensure long-term stability control.(Note:max load:30A).
  • STRONG SIGNAL:Adopts RF technology ,it can pass through walls, floors and doors, control receiver from any place within a reliable distance.Max range is up to 4900FT with no obstacle..
  • EASY TO CONTROL:Learning code has high-level security for its low repetitive rate and re-learn mode, it can delete the old code and re-learn a new code.There is a switch key on the relay.If the remote control get lost.You also can always control of it.(When in using, a plastic slider on the side of the remote need to be moved into a particular position.).
  • HIGH SENSITIVITY- Sensitivity -114dBm,Stable and reliable performance,high receive sensitivity and anti-jamming capability.（NOTE:Please don't put it in a metal waterproof box, otherwise there will be no signal.）.
  • WIDE APPLICATION:This long distance remote switch is used in pumps, mud pumps, motors, lamps, Fans,Insecticide machines, sprayers, car washers, bells, etc. Various types of electrical equipment ..
Check Stock

How to Use a Breadboard! (Make: Handbook)

  • 30A High Current 12V Contactor relay Switch DC power Switching Control Board.
  • Using high-quality ultra-small optocoupler, anti-interference ability, stable performance..
  • Using 9.5mm black fence terminal, standard 30A terminal, stable and solid, reliable quality..
Check Stock

Nilight LED Light Bar Wiring Harness Kit - 1 Lead 12AWG Heavy Duty 12V On Off Switch Power Relay Blade Fuse for Off Road LED Work Light,2 Years Warranty

  • 10 feet harness: 10ft heavy-duty harness, 12AWG stranded wire, up to 450W load capacity, the length from relay to switch is extendable.
  • Illuminated Switch 3 pin on/off rocker switch with red indicator light when truing on easy to turn on or off has been passed test of 5 000 times pressing.
  • Circuit Protection Power relay-safety protection and conversion circuit Blade fuse protects the circuit when overcurrent or short circuit occurs.
  • Wide application: suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts and trailers.
  • Package include: 1 x 10 feet wiring harness, 1 x instructions.
Check Stock

uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

  • Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
  • AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
  • corridor delay switch, delay energy-saving products.
  • Supply voltage: AC 220V power supply, Current: greater than 100mA.
Check Stock

[2 Pack] DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller

  • 【Multifunction Timer Relay】Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc..
  • 【Load Range】Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable)..
  • 【Reverse Protection】Built-in a diode to provide protection against accidental reverse polarity for the circuits..
  • 【Sleep Mode】If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up..
  • 【Parameter Setting】OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time..
Check Stock

HiLetgo 2pcs 12V Photoresistor Sensor Relay Module Car Light Automatic Control Switch with Cable

  • Relay working mode: NO(normally open) or NC(normall closed).
  • Load capacity: AC 0V--250V/10A, DC 0V--30V/10A.
  • Characteristic: Relay outputing separately.
Check Stock

WOWOONE 30 Types 74HCxx Series Logic IC Assortment Kit, Logic Gates, Integrated Circuits Assortment Kit, TTL, High-Speed Si-Gate CMOS IC, Low-Power

  • Input point X element x0-x7, DC24 input, low level valid. X0-5 is the high-speed counting input port (default: 12K,100KHZ optional)..
  • Output analog voltage WR3A instruction, corresponding to the value 0-4095. Intermediate relay M: M0-M3071, the power loss preservation range can be set..
  • The maximum speed current is 1A. External load common terminating + 24, the other end received the PLC output port Y..
  • Y0-Y5 is optional relay or transistor output, relay output current 5A. The transistor output DC24V, the current maximum 1A..
  • 100Ms timer: t0-t199, accumulative power off save t184-t199.
  • 10Ms timer: T200-T249, accumulative power off saving T246-T249.
  • 1Ms timer: T250-T383, where T250-255 is cumulative.
  • 16-bit counter: C0-C199, power off to save C100-199.
  • 32-bit counter: C200-C219, power off to save C220-C234.
Check Stock

Vikye Driver Module, 4 in 1 MAX7219 LED Dot Matrix Display Driver Module, Professional MCU Controller DIY Kit

  • EASY OPERATION: The industrial remote control is 12 button design, which is easy to operate, has complete functions, which is simple and practical..
  • RELAY LOAD: The maximum load capacity of the relay is 1-110V 5A DC, 85-265V 6A AC, suitable for more industrial control applications..
  • 8 WORKING MODES: The controller has modes including instantaneous, self locking, interlocking, self locking and instantaneous coexistence..
  • HIGH SENSITIVITY: Remote control distance in open space reaches 300‑500 meter, +20dBm wireless transmission power, high receiving sensitivity..
  • GOOD ADAPTABILITY: The rolling code coding and decoding type (similar to HCS301) can adapt to up to 32 remote controllers, stable and reliable..
Check Stock

Phase Monitoring Relays JVR800-2 Under Over Voltage Protector, Three-Phase Voltage Monitoring Sequence Protection Relay with

  • This monitoring relay can monitor own working voltage..
  • 8 kinds of rated voltages are adjustable, can apply to voltages in all regions of the world.
  • The working status of the relay is indicated by the LED indicator.
  • Ultra-small size and it is easy to install..
  • It is applied to mobile device connection control, causing accidents in equipment protection against reverse operation, normal/emergency power switch, preventing phase failure of power load..
Check Stock

Baomain SSR-60DA 60A Solid State Relay Module 4-32VDC / 24-480VAC + Heat Sink

  • Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
  • Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
  • Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
  • This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
  • Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
Check Stock