Top Heavy Tripod For Flash

Neewer® Black Metal Cold Shoe Flash Stand Adapter with 1/4-inch -20 Tripod Screw (5 Packs)

  • Fit into the 1/4" thread tripod or light stand.
  • Metal Hot Shoe Flash Stand with 1/4"-2 Tripod Screw.
Check Stock

Selens Large Photography Equipment Bag Carrying Zipper Case 41x9.8x11.4 inch with Strap for Photo Studio Tripod Light Stand Umbrella Camera Accessories Kit

  • 【Large Capacity】Size: 41 inchx9.8 inchx11.4 inch/105 cmx25 cmx29 cm.Big enough to carry light stands, tripods, boom arms and other photographic equipment and accessories..
  • 【High Quality Material】The bag is made of high-end nylon material. It can carry heavy equipment strongly..
  • 【Perfect Design】Double zipper design, rubber feet on bottom and water resistant..
  • 【Dustproof and Shockproof】Five moveable padded dividers，ensure your tripod or studio kit when not in use is properly protected from dirt, moisture, dust and damage..
  • 【Universal Fit】The bag fits for light stand, tripod, monolight, LED light, flash, etc..
Check Stock

NEEWER 6.6’/2m TTL Off Camera Flash Speedlite Cord Compatible with Nikon SB-5000 SB-910 SB-900 SB-800 SB-700 SB-600 SB-400 Nikon Z7 Z6 Z6II Z5 D850 Cameras NEEWER 750II NW420 NW655 Z1 Flashes

  • 【Off-Camera Flash Control】 The cable provides you with total TTL control for a digital/film camera and flash using the standard ISO shoe connection. Compatible with Nikon SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-400, SB-80DX, SB-28DX, SB-28, SB-27, SB-26, SB-25, SB-24, SB-22 flashes and compatible with Nikon Z7, Z6, Z6II, Z5, D850, D810, D780, D750, D500, D7500, D5600, D5300, D5100, D3300 cameras.
  • 【Eliminate Shadows】 The cable helps achieve off-camera flash photography results without the harsh shadows behind your subjects when using direct flash exposures..
  • 【Flash Shoe Mount】 Features a flash connection shoe mount on one end for connecting your camera flash speedlite and a 1/4”-20 threaded hole to connect a tripod stand. Mount your flash on a tripod stand to free your hand from holding the off-camera flash.
  • 【Camera Shoe Mount】 Features a camera connection shoe mount on the other end to connect to your camera’s hot shoe. There is a locking mechanism on the side for secure locking..
  • 【Durable Coiled Remote Cable】 The off-camera flash shoe cord keeps all on-camera functions of the flash within 6.6’/2m meters. The extended length and durable cable ensure your shooting experience is convenient and free..
Check Stock

ChromLives 1/4'' Dual Camera Mount Flash Bracket Extension Bar 10.6'' Straight Flash Bracket Tripod Mount Bracket for DSLR Camera LED Light Flash Light Microphone and More

  • Dual Camera Mount with 1/4" standard screw hole to mount on tripod..
  • The straight flash bracket is with dual 1/4" Screws to support two cameras,flash units or mics at the same time..
  • Dimensions: 10.6 x 1.2 x 0.2 inches (LXWXH), Max Loading Capacity: 6.6LB (3kg)..
  • Adjustable Range: From 3.7 to 9.3 inches.Long enough to hold two LED light at the same time. (Please check the max adjustable range for your camera or accessories before order)..
  • This Dual Camera Flash Mount Tripod Bracket is made of ALL Metal Aluminum, affixed with non-slip rubber pads to protect your camera flash and Mics from scratches and anti-slide..
Check Stock

Andoer Professional Video Tripod System-67 Inch Professional Heavy Duty Aluminum Tripod with Detachable Fluid Drag Pan Tilt Head and Quick Release Plate Max Load 10kg/22lbs for Video Camcorder

  • HEAVY DUTY AND STABILITY- Andoer camera tripod adopt aluminum alloy construction, excellent in durability and stability. As a professional video tripod, the max diameter of the tripod is 16mm, and the max load capacity can up to 22 pounds. When you add a flash or a battery grip to your camera in the future, or shoot with a heavier cameraequipment, 22 pounds max load will help you avoid the collapses of the whole thing, and avoid destroying your camera and lens..
  • PANORAMIC-Andoer tripod system including a fluid drag video head features a tilt range of 90 degrees forward and 80 degrees back, head pans 360°making it possible for you to shoot action photos, built-in bubble level indicator on the head ensures you quickly manage the horizontal level.
  • The handle of ballhead can be installed on both right and left..
  • ADJUSTABLE AND FLEXIBLE-The max height is 170cm/67inch,enables you to keep the viewfinder at your eye level.And if you are going to shoot something lower than your eye level, you can easily adjust the legs to be shorter. And the minimum size(folded size) is 80cm, with the tripod bag, portable to be taken with you..
  • WIDE COMPATIBILITY & EXCELLENT WARRANTY-Ball head with 3/8" screw hole, can be installed on the monopod directly.
Check Stock

TARION Camera Flash Bracket H-Type Mount Swivel Tilt Light Stand Metal Umbrella Softbox Holder Adapter 180° Adjustable for 1/4\ 3/8\ Lamp Mount Tripod

  • It fits for holding the softbox or umbrella on the light stand and allows for flashing from horizontal / vertical or at the middle and low position.
  • 180° adjustment supports any angle of flashing The flash can be fixed by the screw on the top of the adapter provide safety.
  • The detachable 1/4"-3/8" double-end nut at the bottom allows for installing your flash on the light stand or tripod freely.
  • Dimension approx 11.5x2.7 cm/ 4.5x1.1 " Diameter of umbrella hole approx 1.5 cm/ 0.6".
  • Suitable for 1/4" or 3/8" light stand tripod softbox umbrella or flash etc..
Check Stock

Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4\-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack

  • Updated Cold Shoe Flash Stand Adapter. Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • Updated: NO SPRING. Never have to worry about the springs falling out again. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel.(Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount)..
  • Universal 1/4" Tripod Screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand..
  • Smart Design - With a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place..
  • Material: Metal construction with black anodized for higher durability..
Check Stock

Heavy-Duty Tripod Base with 1.66 Inch Mast 3 Feet

  • Permanently mount an antenna or satellite dish on the roof with Skywalker’s Heavy Duty 3ft Tripod Base. The mast AND installation hardware is....
  • An advantage of Tripod mounts is that you can mount them almost anywhere. From the peak of a rooftop to a flat platform, this tripod can handle it.....
  • The Tripod is surprisingly heavy duty without being overly weighty which, conveniently, makes it easy to carry up a ladder. It folds out into the....
  • Tripod comes with its own 1.66" x 28” mast to get you started. It is secured in place via the bolts and nuts attached to the Tripod at the mast base....
  • The Skywalker Signature Series Heavy Duty 3ft Tripod Base can support masts up to 2" OD..
Check Stock

ChargerCity 360º Swivel DSLR Hot Shoe Flash Camera Mount for Apple ipad Mini Samsung Galaxy Tab Dell Venue 6 7 8 inch Tablet *Use Both DSLR Camera & Selfie Record See Yourself simultaneously*

  • Brand New in No Fuzz No Mess Package includes ChargerCity Custom Fit iPad mini cradle holder & 8" Adjustable Bendable Tripod Adapter.
  • Easy to install SLR Camera Flash Hot Shoe Mount w/1/4-20 connection for Apple iPad Mini (Retina) Samsung Galaxy Tab 2 3 4 5 Dell Venue Pro Toshiba Encore Lenovo IdeaTab Asus Memo Pad 6 7 8 Tablet.
  • Universal Hot shoe Adapter Compatible with any existing camera with aviliable flash hot shoe slot or Tripod with 1/4-20 connection.
  • 1/4-20 Bendable adapter can function as stand alone as adjustable tripod extension.
  • ChargerCity Manufacture Direct Replacement Warranty (No Need to contact 3rd party, Manufacture will warranty your product directly).
Check Stock

SLOW DOLPHIN Hot Shoe Mount Adapter 360 Degree Swivel Mini Ball Head 1/4 Tripod Screw Head for Cameras Camcorders Smart Phone LED Video Light Microphone 4 Packs

  • 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut..
  • Standard hot shoe adapter it will fit Cameras, Camcorders, Smart phone, Gopro, LED Video Light, Microphone, Video Monitor and Ring Flash Light.
  • 360 Degree Rotation - Comes with swivel ball head allows easy direction of your monitor/flash light. Large knob to quick lock up..
  • Shoe Mount made of sturdy Aluminum that withstands heavy loads.Precise CNC process and black anodized for higher durability..
  • This ball head withstands max loads 3.3lbs, one quick knob to lock solidly and move smoothly. Rubber Mat on the tripod base to prevent scratches to....
Check Stock

Fiberglass Surveying Tripod, Heavy Duty Green Fiberglass and Wood Tripod with Dual Clamp and Copper Center Screw for Robotic Total Stations and Theodolite (Round Head-A)

  • Big Round Head Heavy Duty Fiberglass Tripod : Fiberglass Surveying Tripod Large precision machined big round head Diameter of head: 162mm with 5/8''x11 copper screw, durable and easy to set up.
  • Dual lock Stability and Durable: Heavy Duty Green Fiberglass and Wood Tripod with dual lock and strut and legs for perform well at Stability and Accuracy Heavy duty dual clamp design add extra stability, Up lock will be quick clamp and below lock will be wing screw.
  • Set Up easily at any terrain: Large foot pad for solid planting and improves Fiberglass Surveying Tripod with stability on any terrain.designing a handle and heavy-duty poly-webbing shoulder strap for ease of carrying to the job site.
  • High Visibilty fiberglass Tripod at wild Green Surveying Tripod with High Visibilty at wild, waterproof and fade-resistant at the surface, makes more safety and durable during the measuring progress.
  • 30days guarantee: Fiberglass Surveying Tripod with Flat head. Package Includes: plastic head cap for protection, Weighs 18-Pound (8.2kg). We will offer 30days for using guarantee, Any questions you can contact our customer service..
Check Stock

Marklif Gorilla Tripod/Mini Tripod 13 inch with Remote for Mobile Phone with Holder for Mobile, Flexible Gorilla Stand for DSLR & Action Cameras

  • Heavy Duty: The Gorillapod mobile tripod is made of high quality ABS. Making it a very heavy duty product and giving it an exponentially longer life, as compared to other plastic based camera tripod. Ensuring that even with a very rough usage your mobile phone, camera, phone, DSLR and tripod stand are safe. If Shooting in rough conditions and environments you have a peace of mind that everything will be safe..
  • Rotating Sphere: An Anodised finishing rotating sphere in tripods for mobile or gorilla tripod ensures that you get a great load bearing capacity for your dslr camera, mobile tripod, DSLR tripod, gopro tripod. Along with an accurate angle lock. Which ensures that your phone stands can take photos at angles that you desire and will stay in that angle as long as needed. Which also ensures that no matter how heavy your device, the tripods is comfortable and can be used for a long duration..
  • Free Holder: A free mobile tripod with holder ensures that you don't have to purchase a separate accessory for your tripods for dslr camera. The holder can hold any device that you'd like to use with your gorillapod tripod mini tripod. Your camera, mobile phone, iPhone, android, dslr, gopro, camera. It also helps you use the camera tripod as phone stand, mobile s....
Check Stock