Top Heavy Wall Tubing

Westin 40-2075 Black Sportsman Grille Guard

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Ram 1500 and Dodge Ram 1500.
Check Stock

ELECFUN 2in Heat Shrink Tubing 3 1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube Fully Insulation 4 Feet Black Tubing and 4 Feet Red Tubing

  • Package: 4 ft long Black 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 4 ft long Red 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~....
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting....
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED....
Check Stock

Premier RC 10 ft. Arch FPV Racing Air Gate - Yellow/Black

  • Made with heavy-duty fade and prop resistant Suntex fabric..
  • Framed with telescoping fiberglass poles or with durable heavy wall fiberglass tubing..
  • Joined with high quality metal ferrules..
Check Stock

ELECFUN 3/8in Heat Shrink Tubing 3:1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube, Fully Insulation (4 Feet Black Tubing, and 4 Feet Red Tubing)

  • Package: 5pcs 0.8ft Black 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 5pcs 0.8ft Red 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

Smittybilt Wheel to Wheel Nerf Steps with Cleated Steps (Black) – T0654FJ

  • Heavy duty 2 inch x .05 inch wall tubing provides heel-to-wheel coverage.
  • 3/16 inch welded on brackets for fast and easy installation.
  • .084 inch wall tube drop steps feature cleated steps.
  • Also available in stainless steel finish (T0654FJ-SS).
Check Stock

AIRIC 3/8in Heat Shrink Tubing Roll, 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat-Shrink Tubing Industrial, Black, 50 Feet Roll

  • What You Get: Industrial black heat shrink tubing roll, Dia 3/8 inch (9.5mm), 50 feet length..
  • Adhesive Lined Black Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing clear is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief. Outer wall is flame retardant, but the glue is not flame retardant..
  • Wide Applications: Our clear waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

ARIES 1052 1-1/2-Inch Black Steel Grille Guard, No-Drill, Select Jeep Grand Cherokee

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Jeep Grand Cherokee.
Check Stock

Waterproof Heat Shrink Tubing Kit 350 pcs ELECFUN 3 1 Dual Wall Tube - Adhesive Lined - Marine Heat Shrink Tubing Black 7 Sizes

  • [3:1 Shrink Ratio & Fast Shrink] Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • [Adhesive Lined Heat Shrink Tubing] While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • [Dual Wall Tube & Safer] Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • [7 Sizes] Heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". Heat shrink tubing is precut to 1.77in..
  • [Wide Applications] Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

ARIES 4088 1-1/2-Inch Black Steel Grille Guard, No-Drill, Select Chevrolet Colorado, GMC Canyon

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Chevy Colorado and GMC Canyon.
Check Stock

Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT

  • EASY TO USE. Easily connect 1/2″ drip irrigation tubing to any standard 3/4″ faucet, hose bibb or garden hose. Just insert and twist, no special tools needed. Each swivel irrigation fitting includes a pre-installed rubber washer to guarantee a water-tight seal..
  • STRESS-FREE FIT. Our faucet connection adapter works with the widest range of half inch tubing, from .520 to .620″ Inside Diamater, .620 to .710” Outside Diameter and .045 to .055 Wall Thickness. PLEASE MAKE SURE YOUR TUBING SPECIFICATIONS FALL WITHIN THESE RANGES FOR THE PROPER FIT. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction..
  • ZERO LEAKS. Power-Loc fittings don’t leak. Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure..
  • REUSABLE & LONG LASTING. Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use..
  • PATENTED LOCKING TECHNOLOGY. Power-Loc fittings are quickly revolutionizing i....
Check Stock

FOR Toyota 2001-2004 Tacoma Grille Black Headlight Park Light 5Pcs TO2502136 TO2503136 TO2520163 TO2521163 TO1200250

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Toyota Tacoma.
Check Stock