Top Heavy duty Clamp Mount

Higoo Smartphone 20mm Picatinny Rail Mount Adapter Holder for Rifle Shotgun Hunting Shooting Sports Video Recording

  • HEAVY DUTY PHONE CLAMP - This fully adjustable holder contains a spring loaded rubber lip so you can easily insert and remove your smartphone.The....
  • HIGHT QUALITY - Made of ABS high-strength plastic,light weight and durable.
  • WIDE APPLICATIONS - Fits for Rifle, Shotgun or any other firearms with 20mm picatinny rail.
  • MUTI-FUCTION - Take off the spring clamp, it becames the rail mount adapter for action camera, compatible with Gopro,DJI,Xiaomi,Sony and other action....
  • PACKAGE INCLUDED - 1x High Quality adjustable phone clamp with picatinny rail mount, 1x hex wrench..
Check Stock

Mippko Foldable Tablet Wall Mount Holder for 7~12.9 inch Tablets iPad / Samsung Tab / Nexus / LG G Pads / e-Reader /Switch, Adjustable Extension Articulating Arm Swivels Mount (Black)

  • ...end and fold freedom,180° rotation portrait and landscape modes,ensure optimal readability when mounting the tablet to the wall, twisting 360° rotation metal ball head ring, tablet can capture best view easily..
  • 【Sturdy & Stable】: Tablet bracket arm,ball head are heavy-duty aluminum alloy material, anti-rust, anti-corrosion,durable,very sturdy, it can load 10kg /22 lbs weight,both of inside and outside room can be used. ABS material tablet clamp with built-in anti-skid rubber pad,reduce scratches, 4 clamped feet can hold your device stable and firmly..
  • 【Install Easily】:Mippko tablet stand metal base has 2 screw holes,we provide screws, screw tubes and screwdriver for users to install, the center distance of base screw holes is 13.2 cm / 5.19 inch,only put 2 screws to fix on the wall, installation is simple for users..
  • 【Mount Anywhere】: Heavy-duty aluminum alloy material arm with tablet is suitable for these places: classroom,conference room, warehouse,healthcare facilities,kitchen,office, restaurant,supermarket,gyms,food shop and kiosk etc, the friendly mount arm and clamp are convenience for you..
Check Stock

Clamptastick !- Universal Cell Phone Holder for mounting on Rearview Mirror Compatible with Mobile iOS Devices Android Smartphone GPS and More Black - Version 1

  • ( Works in Horizontal Mode only on rearview mirror )***** Clamptastick version 1 is a large lightweight heavy-duty clamp that holds your phone in one....
  • Made from high quality metal components that included a 360-degree high quality aluminum ball head, aluminum alloy rearview mirror clamp, and a heavy....
  • Easily mount to your bicycle or mount underneath your car mirror for easy viewing of directions, important phone calls, and messages. Driving....
  • This Clamp can easily be removed from you car and mounted on a bicycle, selfie stick, tripod, office desk, a tree branch, baby stroller, four-wheeler,....
  • Clamptastick can be used in conjunction with small cameras many GPS models weighing up to 5 lbs. and a width of 5.5 inches. This includes but not....
Check Stock

Highway Pegs Foot Rest with Mount Clamp Fit for Harley Sportster Dyna Touring Street Glide Road Glide Road King Electra Glide with 1.25 inch Engine Guard 1 1/4' Highway Bar (Black)

  • [Material]:Made of heavy duty billet aluminum,strong and durable,and prime quality rubber not easy to came off.
  • [New Generation Clamp]:①New generation mount clamp ,firm grip the engine guard ②Oversized footpegs,provide more comfortable place for foot ③Short arm designed for many multi-fit applications especially for tall riders.
  • [Multi-Angles Adjustable]:The foot pedal and mount clamp is 360 adjustable,you can adjust comfortable angle and position.
  • [Fitment]:Fit for Harley Sportster Dyna Touring Road King Street Glide Road Glide Electra Glide with 1 1/4 inch highway bar.
  • Universally fit on 1 1/4" engine guards or tubing.
  • requires 1 1/4" of straight engine guard tube for clamp mounting.
  • [Package]:1 pair highway pegs +Mount clamp kit(As the picture show).
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Action Mount - Picatinny Rail Mount + Smartphone Mount for Video Recording While Hunting Paintball or Target Practice Universal Mount Fits Most Phones.

  • HEAVY DUTY PHONE CLAMP - This adjustable threaded device holder contains a screw mechanism so you can lock you device in place with ease..
  • TIGHT GRIP - clamp opens from 55 mm to 102 mm wide and contains angled lip on top and bottom that creates a non-slip hold so you can so you can be....
  • RAIL MOUNT - This CNC rail mount fits all standard rail designs, includes screw-pin tightening system to lock in place. This pin can be tightened by....
  • iPhone Compatible- This works with iPhones, or any phones, and allows you to view the screen so you easily start and stop video recording. Also, this....
  • WHAT'S INCLUDED - High Quality adjustable phone clamp, Picatinny Rail mount. This holder fits most phones..
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

VIVO Dual Monitor Desk Mount, Heavy Duty Fully Adjustable Stand, Fits 2 LCD LED Screens up to 30 inches, White, STAND-V002W

  • Fits 13" to 30" Screens - Dual monitor mount fitting two screens 13” to 30” in size and up to 22 lbs in weight each with VESA 75x75mm or 100x100mm backside mounting holes. Cable management clips are provided along the arms and center pole..
  • Articulation & Height Adjustment - Adjustable arm offers +90° to -90° tilt, 180° swivel, 360° rotation, and height adjustment along the center pole. Monitors can be placed in portrait or landscape orientation..
  • Heavy Duty C-Clamp - Mounts to the back of your desk (up to 3.25” thick) via a heavy-duty C-clamp or optional grommet mount..
  • Easy Installation - Mounting your monitors is a simple process with detachable VESA bracket plates. We provide the hardware and easy-to-follow instructions for assembly..
  • We've Got You Covered - Sturdy steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns..
Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

EMART Photography Reflector Clamp Holder with 5/8' Attachment and 8.5 ft Stand Kit, Photo Video Studio Heavy Duty Metal Clamp Holder Light Stand Mount Bracket with Umbrella Reflector Holder

  • This product includes: [1x] Heavy Duty Metal Clamp Holder, [1x] 8.5'(260cm) Light Stand with 1/4" Screw Tip. Long service time and exceptional strength for heavy duty..
  • Heavy duty metal clamp holder can grip the large reflector due to its high load capacity. Super powerful metal clamp can 360°rotation and special designed for umbrella support..
  • Professional light stand made of aluminum alloy construction for durability, Adjustable from 2.9ft to 8.5ft, max load capacity:22lb, Standard light stand mount for use with any light head, 1/4" screw tip on the stem it supports all of photo equipment such as softbox, reflector, umbrella..
  • This is a product that can effectively reduce the workload for photographers who work alone and the bracket is equipped with 180 degree vertical adjustment lamp holder, which allows to adjust the angle of reflector..
  • Simple to use just attach the reflector to the stand via the reflector holder, perfect for positioning your reflectors or softbox, umbrella. Perfect for photo studio and on site photo and video shoots. Note: The reflector is NOT included..
Check Stock

Desk Mount Stand 2 Pack DSLR Camera Desk Mount C Clamp Light Stand 13.7 ~23.2 Photographic Light Boom Stand with 360° Ball Head for Camera Ring Light Video Light Video Conference Light

  • 【Retractable Desk Mount Stand】 The minimum height is 13.7 inches and can be extended to 23.2 inches, with positioning screw, loosen the knob and....
  • 【Multiple Angles】 The 1/4" ball head can ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography....
  • 【Upgraded table mounting clamp】 Compared with the old version, this tabletop mount clamp has a scratch-resistant pad and a wider mouth (up to 3.4....
  • 【Heavy duty structure】 The clamp mount stand is made of sturdy and durable aluminum alloy and weighs 490 grams/1.08 pounds. Designed for....
  • 【Package List & Warranty】 2*Ball Head, 2*Desk Mount Stand. 1-year warranty. (Please contact us if you encounter any, we will reply within 24....
Check Stock

BKL 1in. Dia x 3in. Long Cantilever with 1-5/8in. Clamping Length, Black (BKL-253-MB)

  • ❖Heavy Duty:4 screw design with cut for weight reduction,weaver base mount with 2 top Slots Medium profile..
  • ❖Fit to All 20mm Rail:Tactical mount ring Medium profile with spirit level,1‘’/24.5mm diameter fit most scope and tactical flashlight..
  • ❖SeeThrough Design:See through design allow you to aim with the rifle's iron sight even with a scope installed..
  • ❖Exquisite Workmanship:Precision machined from aircraft-grade aluminum alloy with anodized black matte finish..
  • ❖Easy to Install:With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock