Top Heavy duty Electric Drywall Lift

Drywall Lift,Drywall Panel Hoist Lift 11FT Sheetrock Lift Drywall Lift Professional Jack Lifter Heavy Duty Sheetrock Hoist Holder Upgrade Adjustable Telescopic Arm and Caster Wheel Lockable

  • 【150Lbs Load Capacity】This drywall lift is made of heavy duty steel. The panel hoist ensures its long service life. The panel hoist has a load capacity of approximately 150 lbs..
  • 【Allows One Person to Work Alone】This drywall lift is perfect for DIY and residential use. The panel hoist allows one person to work alone to install gypsum board walls and ceilings. The panel lifts are easy to position and adjust to place them exactly where I need them..
  • 【Safe and Balanced】 Drywall lift with wheelbase. Wide enough to stabilize a 12-foot drywall panel 15 feet off the ground, the panel lift's telescoping center is physically lifted by a cable/pulley mechanism. Turn the sheave in the panel lift's 3/16-inch metal aircraft cable..
  • 【Tool-Free Assembly】Easy to assemble, no tools required. Quick tool-free setup and disassembly for storage..
  • 【Adjustable Telescopic Arm and Panel Rotation】 The telescopic arm is adjustable and perfect for installing panels. It is a rubber telescopic arm that will not scratch your panels. This gypsum board lift can tilt 60° forward or backward and rotate 360°. Widely used for flat and pitched roofs..
Check Stock

CARTLIFE Plywood and Drywall Panel Carrier Tool,Sheetrock Gripper,Heavy Duty Metal Gripper for Clamp Wood Board or Drywall Lifter with Single Hand (No Back Pain)

  • ...ol can hold up to two panels or sheets simultaneously.Simple design that allows the clamp to grip a variety of different kinds of panels and sheet goods. When you start lifting, the clamp automatically adjusts the width depend on the thickness of the panel or sheet..
  • ✅【Easy on your back】 Traditionally carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and allows you to carry heavy materials with a single hand. Rather than bending over to lift materials from the bottom, simply place the clamp over the top edge of the material, then lift. The self-adjusting clamp holds materials tight as you lift..
  • ✅【Only one-hand carrying】Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift..
  • ✅【Heavy Duty Holder】Carrying all kinds of plywood, panels, sheets, and slabs, carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper 0-1”.
  • ✅【Innovative Tool Design】Heavy-duty solid metal construction. The clamp and the handle arm are made in aluminum. The handle is made of impact-resistant ABS polymer. This high-quality construction ensures that the tool can ....
Check Stock

Drywall Lift Panel 11FT Drywall Lift Panel Hoist Drywall Panel Hoist Construction Tools with Adjustable Telescopic Arm, Rolling Caster Wheel Lockable, 150 lbs

  • [Saving Labor] This Drywall Lift is very Suitable for Interior Decoration of Houses. A Person can Lift Drywall and Ceilings by Operating the Panel Lift Alone. The Panel Lifts are Easy to Position and Adjust to Place them Exactly Where I Need Them..
  • [Upgrade fixed Lock Parts] This drywall lift has an Upgraded Device for Fixing the Bottom Foot Plate. The Old Drywall Lift uses Bolts to fix the Wheel Feet, and the Loosening of the Screws over time may Cause Safety Hazards. Our New Drywall Lift Adopts a Bolt-type Method to fix the Wheel Foot Plate, and the Bolt Corresponds to the fixed Hole, so that it is Firmly fixed and will not Slide..
  • [150LBS 11' Drywall Lift ] Drywall Lift-heavy Steel Structure, maximum load capacity is 150 pounds. Apply various Drywall panels up to 4ftx8ft..
  • [Adjustable Telescopic Arm and Panel Rotation] The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings..
  • [Simple Disassembly and Assembly] This Drywall Lift has a Simple Structure and is very Easy to Assemble and is not Complicated. A person can Quickly install and put it into ....
Check Stock

Drywall Lift Rolling Panel Hoist Jack Lifter Construction Caster Wheels Lockable Tool 16FT

  • √ 150LBS 16'-19' Drywall Lift--Heavy duty steel construction, Max Load Capacity: 150 LBS.
  • √ Hoist Up on Walls/Ceilings--Lifts 16' Ceiling & 19' Wall,Apply various Drywall panels up to 4ftx16ft.
  • √ Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and disassembly for storage..
  • √ Built-in winch with brake--The lock device and built-in winch brake to guarantee safety and sturdiness while working..
  • √ CE standard --CE standard lift, build with All welded steel construction. Features 3x4" caster wheels for easy rolling and stop..
Check Stock

flat-bike-lift - The new overhead rack to store the bikes flat to the garage ceiling

  • Quick lock of the bike. Suited to any kind of bicycle. Max load 21 Kgs = 46 Lbs, for e-bikes pls refer to our website flat-bike-lift dot com and order option items S24 "heavy duty gas spring" and WWT "wide wheel tray". Ideal for 8/8.5 ft. ceilings. For the higher ones, our longer "arms" item XLE may be considered. Pls contact our customer service..
  • The hydro-pneumatic lifting system of the flat-bike-lift takes the bike safely and automatically into the horizontal position flat to the ceiling.
  • Low-speed driven auto return (the idle stroke not to be controlled by the user).
  • For drywall ceilings, a bracket is needed. Pls refer to "flat-bike-lift North America">"Help">"Drywall Ceilings" or our website flat-bike-lift dot com.
Check Stock

Artist Hand 11' Drywall Lift Rolling Panel Hoist Jack Lifter Construction Caster Wheels Lockable Tool Red

  • √ 150LBS 11' Drywall Lift--Heavy duty steel construction, Max Load Capacity: 150 LBS.
  • √ Hoist Up on Walls/Ceilings--Lifts 11' horizontal Ceiling & Max.15'Wall,Apply various Drywall panels up to 4ftx8ft.
  • √ Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage..
  • √ Built-in winch with brake--The lock device and built-in winch brake to guarantee safety and sturdiness while working..
  • √ CE standard --CE standard lift, build with All welded steel construction. Features 3x4" caster wheels for easy rolling and stop..
Check Stock

Sheetrock Lift Drywall Lift, 11 Ft Drywall Lift Rolling Panel Hoist Jack Lifter with Adjustable Telescopic Arm &Lockable Caster Wheel Sheetrock Lift Construction Tool

  • 【150Lbs Load Capacity】Made of heavy duty steel construction, The MAX load capacity of the dry wall lift panel hoist is 150 lbs..
  • 【Easy to Assemble & Disassemble】Easy to assemble, no tools required. Quick tool-free setup and disassembly for storage..
  • 【Adjustable Telescopic Arm and Panel Rotation】With adjustable telescopic arm and rotatable gypsum board( tilt 60° forward or backward and rotate 360°), the sheetrock lift is perfect for installing panels..
  • 【Lockable Wheel】With lockable caster wheel for easy rolling and stop. It is safe to use..
  • 【Application】This drywall lift is perfect for DIY and residential use and it allows one person working alone to install drywall walls and ceilings.The Panel Lift works quietly when raising and lowering the hoist which will not bother your neighbors..
Check Stock

Artiva USA Hamilton Lift Chair, 33\ W X38 D X41 H, Brown

  • Super quiet and Smooth Electric Power Lift Recliner. Heavy Duty Power Lift ensure long lansting uses. The backrest and footrest can be adjust individually with simple Power Controller button..
  • Premium Air Leather, breathable leather lining Upholstery that is Soft to Touch and Comfortable to sit..
  • Infinite lock position Power Lift Chair. The backrest can operate from 110- 180 degree, and the footrest can operated from 90-180 degree..
  • Heavy Duty contruction. All wood used in our product is Formaldehyde-free, conform to California Air resouece Board(CARB) requirement..
Check Stock

Windermere 2001 3-Position Reclining Lift Chair (Gun Metal)

  • Three-position, all electric lift and recline. Furniture grade hardwood/plywood construction.
  • Heavy-duty steel lift mechanism. 375 lb maximum weight capacity.
  • Integrated emergency battery backup. Heavy duty polyester chenille fabric. Great zippered back and seat access to adjust comfort..
  • Convenient pocket on both sides of chair to store magazines, newspapers, or a remote control. Heat and massage option available.
  • Warranty: 1 year parts and service and lifetime on lift frame.
Check Stock

Kolpin Heavy-Duty 3-Point Hitch System - WHS03HD,black

  • Heavy-duty Category ?O? 3-point hitch for use on ATVs and UTVs , fits any automotive style 2" receiver hitch.
  • Heavy-duty, 12v electric actuator that does the heavy lifting work for you while also providing an incredible 300 lbs of downforce, 250 lbs. lift....
  • Innovative features incorporated into the DirtWorks 3-Point Hitch System provide easy change over from work to play in just minutes with quick, easy....
  • Convenient rocker switch can be mounted to your handle bars so soil depth adjustments and lift for transport is done without ever having to get off....
  • Fully adjustable lift arms and top link for maximum customization for any task.
  • Requires Accessory Tool Bar (Sold Seperately).
Check Stock

Mr Hardcore/Gal A Go/Hey Diddle Diddle/Wheel Cart

  • 6" Club Car PRECEDENT 6” Heavy Duty Double A-Arm Suspension Lift Kit and 14" Black 'LANCER' wheels with mounted All-Terrain tires, center caps, and lug nuts..
  • Fits: Club Car Precedent electric and gas models (2004+).
  • Includes: 6” Heavy Duty Double A-Arm Suspension Lift Kit, (4) 14"x7" Black 'LANCER' Aluminum Alloy Wheels that come mounted with 23"x10"-14" DOT rated All-Terrain tires, Black 'SS' Center Caps, and (16) Black 1/2x20 Lug Nuts. All Lift Kit Hardware, step by step instructions, estimated 1-3 hours installation.
Check Stock

VIVOHOME 120V 440 Lbs Lift Electric Hoist with Remote Control, Electric Winch, Garage Ceiling Crane Overhead, Zinc-Plated Steel Wire Hoist for Garage, Warehouses, Factories Lifting

  • HEAVY-DUTY - The VIVOHOME Electric Hoist is made of high-quality alloy steel and heavy-duty mounting clamps.
  • The forged steel hook won’t break or bend even when overloaded.
  • It’s equipped with a high-strength braided steel cable that has an anti-twist design.
  • It features a height limitation device that prevents the user from lifting heavy objects past a safe height and damaging the machine body.
  • DUAL-LINE OPERATION - Designed with a pulley lifting hook for dual-line operation.
  • Single line lift specifications: 220 lbs. at 33 ft/min with a maximum height of 38 ft..
  • Double line lift specifications: 440 lbs. at 16.5 ft/min with a maximum height of 19 ft..
  • REMOTE CONTROL - The electric hoist comes with a remote control that allows for operation from distances of up to 98 ft..
  • This is an ideal solution when the hoist is placed far from the operator or on high beams, where conventional wire controls are not practical.
  • The capability also allows for a safer site, as the operators can stay away from the lifting area.
  • The stop button stops the machine running while emergency case.
  • SAFE AND DURABLE - The entire copper motor is covered by a durable aircraft-grade aluminum alloy housing.
  • This sturdy electric winch is compact, lightweight, and built for long-....
Check Stock