Top Heavy duty Performance Shocks

FriHobby RC Shocks Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 2WD/4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 (Gray)

  • Compatible with:1/10 Traxxas Slash 2WD&4x4, Stampede 2WD&4x4, Rustler 2WD&4x4 VXL, Hoss 4X4 VXL, Ford F-150, Bandit RC Trucks..
  • The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

New Replacement After Market V-Belt 1343756 1343782 Delta Drill Press 11-990 K 32.5

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Delta Model 11-990 Type 1.
Check Stock

FriHobby RC Shocks Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 2WD/4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 (Navy Blue)

  • Compatible with:1/10 Traxxas Slash 2WD&4x4, Stampede 2WD&4x4, Rustler 2WD&4x4 VXL, Hoss 4X4 VXL, Ford F-150, Bandit RC Trucks..
  • The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

East Lake Axle replacement for Rear left & right shocks Polaris Sportsman 400/500 / 600/700 / 800 1995-2006

  • Please verify your year, make and model in the product details before purchasing..
  • Heavy Duty Gas Shocks. Brand new ready for install.
  • OEM Replacement for the following OEM #'s 7041454.
  • Our shocks have 10% higher load capacity than the OEM..
Check Stock

MOSNAI Yamaha Golf Cart Springs for G14, G16, G19, G20, G22, G29 Golf Cart Heavy Duty Rear Springs(2 PCS Black)

  • ✅【Compatible】：Yamaha Heavy Rear Springs fit Yamaha Gas and Electric G14, G16, G19, G20, G22, G29 Drive Golf Carts.(Only Fit OEM/ Factory Rear Shocks ).
  • ✅【Repalce Factory Yamaha Rear Shocks Springs 】 Heavy Duty Rear Coil Springs Replace OEM/ Factory Yamaha Rear Shocks Black Coils Springs..
  • ✅【Safety】These Yamaha Golf Cart HD Springs Save The Sag Problem When With Rear Seats,Cargo Boxes Or Lift Kit.Help Your Golf Cart With Great Ride And Added Stability Even With High Speed..
  • ✅【Easy Installation】With A Extra Wrench,Just Follow the Manual or watch a video on YouTube to Install the Yamaha heavy rear spring..
  • ✅【Package Include】 2 New Yamaha Heavy Rear Shock Springs, 2 New Sets Of Spacer Clamps And Screws, 1 Simple Wrench, 1 Installation Instruction Manual..
Check Stock

ReadyLift 67-3809 Rear Shock Extension Bracket for GM/Chevy Black Powdercoat

  • Helps retain factory length shocks without sacrificing the ride.
  • Allows you to use your factory length shocks with rear lifts..
  • These shock extensions are ideal for when you install a rear lift block and your shocks are too short..
  • Heavy duty welded steel construction and includes new shock mounting hardware.
  • against manufacturer defects in materials and workmanship for the life of your vehicle.
Check Stock

20 inch 200 LB Gas Prop Struts Shocks 20 Heavy Duty Gas Springs for Murphy Bed RV Camper Bed Floor Hatch Trap Door Large Shed Window Support Lid Weight 170-220lbs

  • ✅ Qty (2) 20 Inch 200 lb Gas Struts --Extended Length: 19.7"(500mm), Compressed Length: 11.8"(300mm), Package include: 2× Shocks, 4× Ball Studs,....
  • ✅20" 200 lb Gas Shocks --Most suitable support weight is between 170 pounds and 220 pounds, if out of this range, we suggest you buy other-pressure....
  • ✅ 200lb Heavy Duty Gas Spring -- Super strong gas shocks can be used on heavy duty RV/Murphy Bed, trailer cap, tonneau cover, sled trailer, large....
  • ✅20 inch 200 Pound Gas Springs -- NOTE: Pack of 2pcs, the whole length from tip to tip is 21inches.
  • 200lbs Per Shock -- couldn't be installed on....
  • ✅20 inch 200LB Lift Supports -- NO MOUNTIGN BRACKETS, if you need please search "B08MWLPYD8" or "B07SFH58QR" for corresponding ball stud brackets!....
Check Stock

Band Saw Table Insert Fits - Delta 28-276 - Heavy Duty Band Saw Insert - Aluminum Table Insert Plate - Made In The USA

  • MADE IN THE USA : Every single inser plate is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our table insert plate replacement for dependable performance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our table insert have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • WIDE COMPATIBILITY : DNLK table insert plate are compatible with most brands. Order our high-strength insert plate and profit from reduced downtime and maintenance..
  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service..
Check Stock

20 inch 200 LB Gas Prop Struts Shocks with L Mounting Brackets 20 889 N Lift-Support Gas Spring for Heavy-duty Floor Hatch Trap Door Murphy Bed Suitable Lid Weight 185 - 220lbs 2Pcs Set

  • ✅ Qty (2) 20 Inch 200 lb Gas Struts --Extended Length: 20.04"(510mm), Compressed Length: 12.13"(308mm), Package include: 2× Shocks, 4× L Mounting....
  • ✅20" 200 lb Gas Shocks --Most suitable support weight is between 185 pounds and 220 pounds, if out of this range, we suggest you buy other-pressure....
  • ✅ 20 inch Gas Spring -- Super strong gas shocks can be used on heavy duty travel trailer bed, tonneau cover, Murphy bed, large heavy-duty floor....
  • ✅20 inch 200 Pound Gas Prop Spring -- includes 4* L type mounting brackets so you needn't buy additionally, there are several ways to install these....
  • ✅18 Months Replacement Support -- If you unluckily encounter with missing parts, broken ball connectors or unfit problem, just click "Ask Seller"....
Check Stock

FriHobby RC Shocks All Metal Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 Big Bore Shock Set (Navy Blue)

  • Compatible with:1/10 Traxxas Slash 4x4, Stampede 4x4 VXL, Rustle 4x4 VXL, Hoss 4X4 VXL, Bandit RC Trucks.(Notice: Not compatible with Slash 2WD, Stampede VXL 2WD, Rustler VXL 2WD, Ford F-150 Raptor).
  • The slash shocks is made of Aluminum Alloy material,high protection and long durability, improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

Wood Lathe Drill Chuck Fits - Jet 1440Vs Wood Lathe - 3/4 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Jet 1440Vs Wood Lathe.
Check Stock

Metal Lathe Drill Chuck Fits - Grizzly G8688 Metal Lathe - 1/2 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Grizzly G8688 Metal Lathe.
Check Stock