Top Hex Bolt Anchor

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

1/4\ x 3/4\ Stainless Steel Hex Bolts, (100pcs), 18-8 (304) S/S, by Bolt Dropper.

  • ã€High Quality Stainless Steel】Bolt Dropper Hex Bolts are 100% 18-8 (304) Stainless Steel giving them one of the highest forms of corrosion resistance. This makes them the perfect choice for use in any environment (including marine/saltwater).
  • ã€Bolts You Can Depend On】Our Hex Head Bolts are very strong and are great for both indoor and outdoor use. Whether you are attaching a piling to a saltwater dock or securing a swing set, you can depend on Bolt Dropper Hex bolts to hold and last..
  • ã€Great To Keep Around】Bolt Dropper Hex bolts are great to have around for when you need them most! Use in any application, any condition, and any environment! Bolt Dropper bolts are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion-resistant, and long-lasting!.
  • ã€Dimensions】Diameter: 1/4" | Length: 3/4" | Thread Type: 20 tpi Coarse Thread (Standard) | Quantity: 100 pcs| Material: 18-8 (304) Stainless Steel..
  • ã€Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

binifiMux 10-Pack M6 x 100mm Allen Head Furniture Crib Baby Bed Bolt M6 Barrel Nut

  • - Size: M6 x 100mm Hex Key Drive Socket Cap Furniture Bolt.
  • - Product: Slot Head Hammer Furniture Nut Bolt Set.
  • - Package: 10 * Hex Socket Head Cap Screws Bolts, 10 * Barrel Nuts , one hex key.
  • - Widely Used for baby bed, bunk bed, table, chair, crib, cot, or workbench, boards, cabinets, cupboards, other furniture..
Check Stock

Klein Tools 631 Tool Set, Nut Driver Set w/Hex Nut Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2-Inch on 3-Inch Full Hollow Shaft, 7-Piece

  • Tool Set has general-purpose selection of the most frequently used nut drivers.
  • Nut Drivers full hollow shafts facilitate work on long bolt applications with internal flanges that provide solid,twist-resistant shaft anchor.
  • Cushion Grip handles allow for greater torque and comfort.
  • Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener.
Check Stock

Klein Tools 647M Tool Set, Magnetic Nut Drivers Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2-Inch, 6-Inch Hollow Shafts, 7-Piece

  • Nut drivers' full hollow shafts (except 3/16-Inch [5 mm]) facilitate work on long bolt applications.
  • Rare-Earth magnetic tips on nut drivers hold fasteners in place.
  • Cushion-Grip handles for greater torque and comfort with color coded handle domes for easy identification.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Features a hollow shank allowing full engagement with nut to hold fasteners securely in place.
  • Suits for working on electrical and HVAC/R panels and stacked circuit boards.
  • Includes corrosion-resistant chrome-plated shafts and cushion-grip color-coded handles for torque, comfort, and hex size identification.
Check Stock

binifiMux M8 x 110mm 65mm Half Thread Furniture Barrel Screws Bolt Nuts Assortment Kit for Crib Cot Bunk Beds Chairs 6 Set

  • - Size: M6 x 110mm Hex Key Drive Socket Cap Furniture Bolt.
  • - Product: Slot Head Hammer Furniture Nut Bolt Set.
  • - Package: 10 * Hex Socket Head Cap Screws Bolts, 10 * Barrel Nuts , one hex key.
  • - Widely Used for baby bed, bunk bed, table, chair, crib, cot, or workbench, boards, cabinets, cupboards, other furniture..
Check Stock

Rexka 15pcs M5 Bumper Cover Fog Lamp Hex Head Screw Bolt 07149123885 for BMW E36 E46 F30 E39 E60

  • Other Names: C-pillar Trim Panel Screw, Fog Lamp Bolt, Guide Bolt, Side Support Bolt, High Mount Lamp Bolt, Support Panel Bolt, Fog Lamp Screw, Lower Trim Panel Screw, Upper Guide Bolt, Air Deflector Bolt, Bumper Cover Mount Bolt, Center High Mount Stop Light Bolt, Led Lamp Bolt, Bumper Cover Screw, Sail Panel Bolt.
  • Hex Head Screw, M5-2.25 X 17mm, Hex Size:8mm X 8mm, Washer Size: 16mm.
  • Fits: BMW: 228i xDrive Gran Coupe, 330e, 330i, 330i xDrive, 430i, 528i, 528i xDrive, 530e, 530e xDrive, 530i, 530i xDrive, 535d, 535d xDrive, 535i, 535i xDrive, 540d xDrive, 540i, 540i xDrive, 550i, 550i xDrive, 640i, 640i Gran Coupe, 640i xDrive, 640i xDrive Gran Coupe, 640i xDrive Gran Turismo, 650i, 650i Gran Coupe, 650i xDrive, 650i xDrive Gran Coupe, 740e xDrive, 740i, 740i xDrive, 750i, 750i xDrive, ActiveHybrid 5, i8, M235i xDrive Gran Coupe, M340i, M340i xDrive, M4, M5, M550i xDrive, M6, M6 Gran Coupe, M760i xDrive, X1, X3, X4, X5, X6, X7.
  • Meet or Exceed OEM Specification. Direct Fitment..
Check Stock

Klein Tools 631M Tool Set, Magnetic Nut Drivers Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2-Inch on 3-Inch Full Hollow Shaft, 7-Piece

  • Nut Drivers' full hollow shaft designed with Rare-Earth magnetic tips facilitate work on long bolt applications.
  • Tool Set contains Nut Driver Cat. Nos.: 630-3/16M, 630-1/4M, 630-5/16M, 630-11/32M, 630-3/8M, 630-7/16M, 630-1/2M.
  • Cushion Grip handles allow for greater torque and comfort and internal flanges provide solid, twist-resistant shaft anchor.
  • Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener.
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

NAXEN 26kN Bolt Hanger Stainless Steel Climbing Hanger Climbing Anchor for 10 mm / 3/8 Bolt Pack of 6

  • Durable Hanger. With stainless steel and vibrated polished, the climbing anchor features corrosion resistant..
  • Sturdy Anchor. The bolt hanger is rated at 26kN, which offers a safe connection point for you..
  • Rounded Edges Design. The clever design offers anti-wear effect when clip carabiner or other gear on the bolt..
  • Large Open. The wide connection hole design facilitates carabiner or any other gears clipping..
  • Available Bolt Diameter: 10 mm / 3/8 in..
Check Stock

6 Pcs M10 Hex Bolt M10-1.5 x 45mm UNC Hex Head Screw Bolts A2-70(304) Stainless Steel Fully Threaded Hex Tap Bolts，Plain Finish，Fully Threaded (M10 x 45mm)

  • Strength Grade: A2-70；Fastrn Torque: 45-59 · m.
  • Stainless steel hex bolt widely used in woodworking and DIY jobs, fasteners for the furniture, TV and bed industry.
  • Hex screw bolt can be widely used in the home and office appliance, communication equipments, ship assembly and other machinery industry..
Check Stock

Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-Wall Anchor Molly Bolt Toggle Bolt with Screws Kit

  • This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
  • Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
  • The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
  • The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
  • These toggle bolts are anchors for use in hollow walls and hollow masonry applications.
Check Stock