Top Hex Flange Screws

#10-24 Serrated Flange Lock Nuts | Stainless Steel 304 | SAE Serrated Flange Nuts | Milliontronic | Imperial #10 HEX Flange Nuts | 100 pcs

  • Made of high quality stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • Package Included: 25 x Serrated Flange Hex Lock Nuts 3/8-16..
  • Flange Nuts are great to have around for use in wood and wet environments..
Check Stock

uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Iron Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 12mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

Prime-Line 9094921 Flange Nuts, Class 8 Metric, M8-1.25, Zinc Plated Steel, (10-pack)

  • - Package Content: 6pcs x Hex Flange Nuts.
Check Stock

Liberty, 4pcs M12 x 1.25mm Pitch Metric fine Pitch 304 Stainless Steel Hexagonal Flange Nuts

  • - Package Content: 10pcs * Hex Flange Nuts.
Check Stock

Rchobbytop 4pcs 1/10 On Road Tires & Wheels Rims 12mm Hex Drift Wheel for HSP Redcat HPI Tamiya 3RACING Kyosho Traxxas Wltoys MST Exceed RC Drift Car with 8pcs Flange Lock Nuts and Wrench

  • Tire Outer Diameter: 62mm(2.44 inch), Tire Width: 26mm(1.02 inch), Drive Hex: 12mm, Axle Hole: 4mm, Depth to the Hex Mount: 8mm.
  • Check The Size Before Buying. Compatible for 1/10 ON-ROAD Drift Car, Like HSP Redcat HPI Tamiya 3RACING Kyosho Traxxas Wltoys MST ExceedRC, etc..
  • Material: Tire-Hard Plastic, Wheel Rim-Quality Plastic, 10 Spokes.
  • Accessories: 4pcs M4 Nickel Plated Flange Serrated Nylock Nuts (Silver).
  • 4pcs M4 Zinc Plated Carbon Steel Flange Nylock Nuts (Black), Flange Can Help....
  • 1 Piece 4-way Socket Spanner Tool, Fits for Wrenching Hex 4mm, 5mm, 5. 5mm, 7mm Glow Plugs, Wheel Nuts and Bolts.
Check Stock

SpzcdZa 150pcs 304 Stainless Steel Serrated Hex Flange Nuts Flange Metric Hex Lock Nuts Assortment Kit (M3 M4 M5 M6 M8 M10 M12)

  • High-quality 304 Stainless Flange Nuts Assortment Kit.
  • The Package Contains 7 Sizes, Included: M3 M4 M5 M6 M8 M10 M12.
  • Package Content: 150Pcs x Hex Flange Nut.
  • Flanged Nut serves to distribute the pressure of the Nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface..
Check Stock

Antsky 4x4(Actual: 3.5x3.5) 4-Way Right Angle Corner Brackets with Flange Anchor Bases，Stainless Steel Pergola/Gazebo Kit Hardware(2 Pack)

  • Material：304 stainless steel, black finishing；.
  • Actual inner size：3.6×3.6inch（91.5mm）,This size applies to nominal standard 4"x 4" wooden post (actual 3.5"x 3.5" post on market).
  • there is a slight error in the actual size, usually the error is about 1mm.
  • Each angle of corner connector is 90 degrees.
  • This package comes with two 4-way right angle corner brackets, 2 post flange anchors, 80 SS hex screws and 8 SS concrete anchor bolts.
  • This 4-way corner brackets are multi-functional, can be used for building pergola、gazebo，playhouse、tree houses、log cabin and so on；.
  • These 4-way right angle corner brackets and the flange anchors make the installation very simple and easy. It's made of stainless steel, which is very sturdy and anti-rusty. The structure designed for covering the whole end of wood beam, so that the wood won't rot by years of rain and sun..
Check Stock

iexcell 900 Pcs Metric M3/M4/M5 x 8/10/12/16/20 Alloy Steel 10.9 Grade Hex Socket Button Head Cap Screws Bolts Nuts Washers Assortment Kit, Black Oxide Finish

  • ✔ Includes 300 Pcs, 15 Sizes, Hex Socket Button Head Cap Screws: M3 x 8, M3 x 10, M3 x 12, M3 x 16, M3 x 20, M4 x 8, M4 x 10, M4 x 12, M4 x 16, M4 x 20, M5 x 8, M5 x 10, M5 x 12, M5 x 16, M5 x 20.
  • Screw Drive Style: Internal Hex Drives, Known as Hex Socket Drives, Hex Size: 2.0 mm(M3), 2.5 mm(M4), 3.0 mm(M5).
  • ✔ Includes 300 Pcs, 3 Sizes Nuts, M3-P0.5, M4-P0.7, M5-P0.8, Meet Different Applications.
  • ✔ Includes 300 Pcs, 3 Sizes Washers, Φ3, Φ4, Φ5: Add Touch Area to Meet Special Condition In Some Cases and Protect Parts from Being Damaged.
  • ✔ Includes 3 Pcs Hex Key: 1 Pcs Hex Size: 2.0 mm for M3 Screws, 1 Pcs Hex Size: 2.5 mm for M4 Screws, 1 Pcs Hex Size: 3.0 mm for M5 Screws, to Drive These Screws Conveniently and Easily.
  • ✔ Material of Screws: Alloy Steel, Black Oxide Finish, High Strength And Anti-rust.
  • Strength Grade: 10.9 Grade, Tensile Strength: 1040N/mm², Hardness: HRC 32-39 ✔ Material of Nuts and Washers: Alloy Steel, Black Oxide Finish ✔ Material of Hex Key: Chrome-Vanadium Steel, Nickel Plated, Higher Strength And Anti-rust ✔ Package: These Screws, Nuts, Washers and Hex Keys Packed In a Sturdy Easy-use Plastic Storage Case, Organized Conveniently and Easily.
Check Stock

Steel Hex Nut, Plain Finish, Grade 8, 1\-8 Threads, 1.732\ Width Across Flats, 0.887\ Height (Pack of 10)

  • Flanged hex nuts with serrated face, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface..
  • Made of high quality stainless steel 304, provides strength and protection from corrosion and tarnishing..
  • Package Included: 50 PCS M5-0.80 serrated flange hex nuts..
Check Stock

Hosim 12mm Wheel Hex Hubs Drive Adapter 5mm Thick & Flange M4 Lock Nuts Aluminum for Redcat Axial HSP Waltoys Himoto RC Truck Model Car Upgrade Parts (8PCS)

  • 【Applicable Vehicle 】Compatible with Redcat Axial HSP Waltoys Himoto RC Trucks Model Cars..
  • 【Wheel Hex Hub】4pcs 12mm hex wheel hub mount,5mm Thickness,4mm hole diameter, and with 4pcs 2x10mm pins..
  • 【M4 Wheel Lock Nuts】4pcs wheel lock nuts hardware, flange nylon self-Tightening, base serrated. 4mm hole diameter, 5.5mm height..
  • 【High Quality】Made of aluminum alloy, CNC precision machining, lightweight, high strength, corrosion resistance and durable. 100% brand new..
  • 【Package Included】You will get 4PCS 12mm Wheel Hex Hub Mount, 4PCS Pins, and 4PCS 4mm Serrated Flange Wheel Nuts..
Check Stock