Top Hex Head Nut - BuyWiseBest.com

binifiMux M8 x 110mm 65mm Half Thread Furniture Barrel Screws Bolt Nuts Assortment Kit for Crib Cot Bunk Beds Chairs 6 Set

- Size: M6 x 110mm Hex Key Drive Socket Cap Furniture Bolt.
- Product: Slot Head Hammer Furniture Nut Bolt Set.
- Package: 10 * Hex Socket Head Cap Screws Bolts, 10 * Barrel Nuts , one hex key.
- Widely Used for baby bed, bunk bed, table, chair, crib, cot, or workbench, boards, cabinets, cupboards, other furniture..

Material: 304 stainless steel (A2-70) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
Feel free to contact us if you have no idea about what size to choose..
Hex nut is most commonly used nut, normally installed to the end of a bolt or other precision screws. You could also find the matched screws with different head types in our shop..

[Hex Brass Standoff Spacer Assorted Kit]: This kit includes male to female, female to female hex brass standoff spacer, with pan head screw, hex nut, washer, it's convenient for your electronics working, such as printed circuit board and motherboard..
[Quality of Standoff Screws]: Standoff spacers are made of brass, screw, nut and washers are nickel-plated, have good corrosion resistance and are passivated for enhanced protection. They may be mildly magnetic. The flat sides of the hex ensure a firm grip when tightening with a wrench..
[Motherboard Standoff Screw Using]: In electronics, they are frequently used to raise a printed-circuit board above a surface. Standoffs are ideal fasteners for keeping printed circuit boards both stationary and elevated away from surfaces, such as the interior of a computer chassis..
[Standoff Screw Nut Assorted Kit Package ]: Included Male-female, Female-female series, Hex nuts, and flat washers. These fasteners stored in a transparent plastic box, convenient for your storage and use..
[NINDEJIN After-sales Service]: If you have any problems with NINDEJIN screws assortment kit, please contact us by email or Q&A, we will give you a professional service and reply to you within 24 hours. We will provide Lifetime technical su....

CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.

Package Contents：6 sets, each include one hex bolt, hex nut, flat washer and lock washer.
Screw Length: 3" or 75mm (measured from under the head).
Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.

500 Pieces Stainless Steel M3 Screws Bolts Nut Washers Kit contains: 30-pieces of M3 x 6mm screws, 30-pieces of M3 x8mm screws, 25-pieces of M3 x 10mm....
Material: 304 Stainless Steel, rust-proof, non-magnetic..
Stainless Steel M3 Screws Bolts Nut Washers Kit can be used throughout many projects like 3D Printer Project DIY Quads Drones RC Hobby, precision....
M3 Screw Head: Socket Cap, Screw Drive: Hex Socket, Hex Size: 2.5mm..

M.2 Standoff and Screw for motherboard NGFF/NVMe Kit，Screw specification M2*3 (mm).
compatible Asus13020 M.2 SSD Mounting Kit Standoff + Screws for Motherboard ..
M.2 Screw + Screw Hex Nut Stand Off for motherboard NGFF.
Application: Perfect for universally laptop notebook repair, applied in electronics, computers, PC board, DIY hobby etc..
Package Content:Hex head jackscrews*4、Flat head Screws*4、Transparent screw washers*4、Screwdriver*1.

Package Contents：10 sets, each include one hex bolt, hex nut, flat washer and lock washer.
Screw Length: 3/4" or 19mm (measured from under the head).
Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.

High Quality Metric M8 white PA66-Nylon Phillips Pan Head Machine Screws Hex Nut with Flat Washer Assortment Kit.
Screws and Nuts Thread: M8/(8mm) with Thread pitch:1.25mm.
Screws are Fully Threaded(measured from under the head).
The assortment contains:M8x10mm(10PCS),M8x15mm(10PCS),M8x20mm(10PCS),M8x25mm(10PCS),M8x30mm(10PCS),M8x35mm(10PCS),M8x40mm(10PCS),Matching M8 Hex Nut (30PCS),M8 Flat Washer(50PCS).
All products are made of durable nylon,advantages of nylon over metallic include electrical insulator properties and moisture,friction,and chemical resistance.
Type specification complete,the quality is reliable,Easy to install and durable to use.

1 bag of approximately 100 M3 stainless steel square head bolts (12mm) designed for MakerBeam (10x10mm in diameter)..
1 bag of approximately 25 M3 stainless steel square head bolts (25mm).
With hex hole for easy use with hex nut driver.
All MakerBeam elements can be combined and reused (no welding required) enabling shorter design and assembly times.
MakerBeam enables professional prototyping and provides mechanics for any electronics project.

Magnetic nut setter can be used with an impact/bit driver or hex socket ratchet to securely grab hexagonal nuts and fasteners for easy installation or loosening/removal.
Industrial grade chrome vanadium steel construction with black phosphate coating for increased hardness, high strength and abrasion/corrosion resistant.
Full master set comes with nut driver bits in both metric and SAE with each setter size clearly engraved on the side for easy identification.
Lobular design head fasteners with rounded edges grab nuts by the sides rather than corners to prevent stripping and lengthen service life.
Each external hex nut socket has a 1/4" socket that is compatible with quick-change/release chucks and locks firmly in standard chucks.