Top Hexagonal Nuts And Bolts

Amarine Made 4 Pack of 6 Stainless Folding Cleat, Flip-up Dock Cleat Retractable Cleats-Enhance Safety and Appearance of Any Boat

  • Rough Cast Hot Dipped Galvanized Iron -These are well durable galvanized cleat, 100% protected against rust. include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.these can hold their own against the weather..
  • Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
  • Wide Footprint for Strength - Boat dock cleats 6 inch large bottom footprint for additional strength,perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
  • Size&Hardware- These dock cleats 6 inch L x 1.3 inch H ,base measures 2.2 inch x 0.9 inch.
  • mounting holes 1.25 inch center to center,boat cleats with hardware - M6x 3.25 inch(83mm) bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
  • Home Nautical Decor- Galvanized boat cleats 6 inch make your home stand out.
  • perfect for maritime, beach, garden, pool, coastal decorations.
  • use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, c....
Check Stock

(10 Sets) 1/4-20x1-1/2" Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 1-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

LAOA Water Pump Pliers,V-Jaw,Tongue and Groove Pliers,7-Inch

  • Made in Taiwan,Meets DIN and ISO standards.The plier body is made of SAE1060,Constructed with oil-hardened for strength and durability..
  • V-jaw design,clear gripping teeth,Gripping surfaces fashioned with special induction-hardened teeth for low wearing and secure gripping.
  • Pliers wrench 7 inch,185mm total length,42mm Max gripping scope.The groove pliers tool can grip flat, round, hexagonal, and square pieces firmly..
  • Pressing PUSH nuts and sliding handle to control the size of opening.Self-locking on pipes and nuts,no slipping on the workpiece.Apply to bolts, and pipes or to clamp, grip, and twist various fasteners and fittings..
  • Ergonomic handle design,with double plastic covered makes conmfortable hand feeling..
Check Stock

VEITHI Boat Cleats 8 inch (4 Pack) - Hot Dipped Galvanized Boat Cleats, Rope Cleat, Anchor Line Cleat - Boat Dock Cleats Ideal for Boat Docks, Decks, Piers for Tying up Boats, Marine Decor

  • Rough Cast Hot Dipped Galvanized Iron -These are well durable galvanized cleats, 100% protected against rust. Include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.These can hold their own against the weather..
  • Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
  • Size&Hardware- These dock cleats 8 inch L x 1.9 inch H ,base measures 2.8 inch x 1.2 inch.
  • mounting holes 1.65 inch center to center,boat cleats with hardware - M8x 4.1 inch bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
  • Wide Footprint for Strength - Dock cleats 8 inch galvanized large bottom footprint for additional strength,Perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
  • Home Nautical Decor- Galvanized boat cleats make your home stand out.
  • perfect for maritime, beach, garden, pool, coastal decorations.
  • use them as cabinet pulls, boat cleat towel rack, rustic coat hanger, curtain tie-backs, nautical coat hooks..
Check Stock

VEITHI Boat Cleats 6 inch (4 Pack) - Electrophoretic Coated Boat Dock Cleats Black, Rope Cleat, Anchor Line Cleat,Dock Cleats with Hardware for Decks, Piers for Tying up Boats, Marine Decor

  • Electrophoretic Coated Black Dock Cleats-These are well durable iron nautical cleats and corrosion resistant, Include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.These can hold their own against the weather..
  • Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
  • Wide Footprint for Strength- These black boat cleats for dock lines large bottom footprint for additional strength,Perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
  • Size&Hardware- These dock cleats black 6 inch L x 1.3 inch H ,base measures 2.2 inch x 0.9 inch.
  • mounting holes 1.25 inch center to center,boat cleats with hardware - M6x 3.25 inch(83mm) black bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
  • Home Nautical Decor- Boat dock cleats 6 inch make your home stand out.
  • perfect for maritime, beach, garden, pool, coastal decorations.
  • use them as cabinet pulls, boat cleat towel rack, rustic coat hanger, curtain tie-backs, nautical coat hooks.boat cleat wall hook,boat cleat hooks..
Check Stock

VEITHI Dock Cleats 6 inch 4 Pack - Hot Dipped Galvanized Boat Cleats Rope Cleat Anchor Line Cleat Boat Dock Cleats Ideal for Boat Docks Decks Piers for Tying up Boats Kayaks Marine Decor

  • Rough Cast Hot Dipped Galvanized Iron -These are well durable galvanized cleat, 100% protected against rust. include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.these can hold their own against the weather..
  • Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
  • Wide Footprint for Strength - Boat dock cleats 6 inch large bottom footprint for additional strength,perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
  • Size&Hardware- These dock cleats 6 inch L x 1.3 inch H ,base measures 2.2 inch x 0.9 inch.
  • mounting holes 1.25 inch center to center,boat cleats with hardware - M6x 3.25 inch(83mm) bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
  • Home Nautical Decor- Galvanized boat cleats 6 inch make your home stand out.
  • perfect for maritime, beach, garden, pool, coastal decorations.
  • use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, curtain tie-backs, nautical coat hooks..
Check Stock

Boat Cleats 8 inch (2 Pack) - Electrophoretic Coated Boat Dock Cleats Black, Rope Cleat, Anchor Line Cleat,Dock Cleats With Hardware Ideal for Boat Docks, Decks, Piers for Tying up Boats, Marine Decor

  • Dock Cleats 8 inch Black- These are well durable iron nautical cleats and corrosion resistant, Include 2 boat cleats with 4 bolts and nuts ready to use indoor and outdoor.These can hold their own against the weather..
  • Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
  • Wide Footprint for Strength- These black boat cleats for dock lines large bottom footprint for additional strength,Perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
  • Size&Hardware- These black dock cleats 8 inch L x 1.9 inch H ,base measures 2.8 inch x 1.2 inch.
  • mounting holes 1.65 inch center to center,boat cleats with hardware - M8x 4.1 inch bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
  • Home Nautical Decor- Boat dock cleats 8 inch make your home stand out.
  • perfect for maritime, beach, garden, pool, coastal decorations.
  • use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, curtain tie-backs, nautical coat hooks.boat cleat wall hook,boat cleat hooks..
Check Stock

HQST Adjustable Solar Panel Tilt Mount Brackets, 28 inch Solar Panel Racks with Foldable Tilt Legs - Support up to 150 Watt Solar Panels for Boats, RV, Roof Off Grid System

  • 【WIDE APPLICATION】: Adjustable solar panel mounting brackets designed for off-gird solar systems, compatible with HQST Solar Panels under 150W. Great addition for use on boats, RV, roof, marine etc..
  • 【HIGH EFFICIENCY】: Ideal for positioning solar panels at an angle on a rooftop.Gain up to 25% more solar panel efficiency by tilting your panels towards the sun instead of laying them flat.Maximum tilt angles depend on the size of solar panels..
  • 【EASY TO INSTALL & ADJUST】: Quick assembly with stainless steel fasteners and precise hole placement. The package includes the bracket between tilt to panel..
  • 【LIGHT WEIGHT BUT STRONG】: Our solar tilt mounts are made of aluminum alloy, which is light weight and ideal for easy transportation and safe mounting..
  • 【 PACKAGE INCLUDES】: Solar panel mounting kit comes with 4 * fixed brackets.
Check Stock

Deburring External Chamfer Tool, Deburring Chamfering Drill Bit, Bolt Deburring Tool Stainless Steel, Remove Burr Tools Quick Release Hex Shank Fits 1/2″to 1-3/8″ (13mm-35mm)

  • 【Improved Carbide Cutting Edge】Razor sharp, maximum efficiency and durability. This demurring external chamfering tool features carbide cutting edge that provides better performance and longevity than counterparts made of materials such as high speed steel..
  • 【Efficiently Safety Design】The hexagonal shank deburring tool can be tightly connected with the head drill, and it has sharp teeth inside, which can cut bolts safely and effectively, quickly repair damaged bolts and tighten nuts in place, without hurting hands and producing no sparks.
  • 【Operation simply】You can attach a deburring external chamfering tool to the end of a power drill and apply light pressure at the lowest speed to remove the burrs. You don’t need to look for replacement bolts, deburring tools repair damaged bolts and improve work efficiency, A good helper for home tools and factories.
  • 【Optimal Compatibility】Deburring external chamfer tool fits 1/8′ (3mm) to 3/4′ (19mm). Operate with sufficient lubrication and less than 500 RPM.Hex shank with quick release design, fits most drills. Can be used to repair damaged/flatted bolts of virtually any material..
Check Stock

Crib Screws Parts Replacements - M6 Baby Bed Crib Bolts and Barrel Nuts for Furniture Bed Cot Bunk 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm Crib Bolts

  • This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost 1 or 2 baby bed bolts or nuts, this kit is your choice. ..
  • This crib screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts and 3 size barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) and one free hex key..
  • Our crib screws bolts and nuts are universal, they are made of carbon steel, they are solid replacements parts for most cribs [but not for all cribs], beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. (for Woodwork Only).
  • Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
  • Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to confirm the right size you will need,.
Check Stock

Crib Screws and Bolts Replacement Hardware Kit - Baby Bed Screws 85mm 75mm 70mm 55mm 50mm 45mm 40mm 30mm 20mm 16mm M6 Replacement Bolts Barrel Nuts for Baby Toddler Bed Crib Furniture

  • Crib blots and screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts + 3 sized barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) + one free hex key..
  • Our crib screws bolts and nuts are made of carbon steel, they are solid replacements parts for most cribs, beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. 【NOT for all cribs, Please Check Your Crib Assembly Instruction and Compare Bolt Sizes and Lengths to See if This Kit Will Work】.
  • This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost some bolts or nuts, this kit is your choice..
  • Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
  • Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to con....
Check Stock

Renogy 28in Adjustable Solar Panel Mount Brackets, with Foldable Tilt Legs on Any Flat Surface for RV, Roof, Boat, Any Off-Grid Systems

  • Adjustable solar panel mounting brackets designed for off-grid solar systems..
  • Quick assembly with stainless steel fasteners and precise hole placement..
  • Great addition for use on top of an RV or other flat surface..
  • Compatible with Renogy Solar Panels under 100W..
  • Package Includes: Four (4) Fixed L-Brackets, Two (2) Tilt L-Brackets, Six (6) M8 Plastic Knob Screws, Six (6) M8 Wing Nuts, Four (4) M6 x 16mm Hex Cap Bolts, Four (4) M6 Split Lock Washers, Eight (8) M6 Flat Washers, Four (4) M6 Hexagonal Nuts, Six (6) M8 Washers, Six (6) M8 Spring Washers, Six (6) #10 x 1¼ in Self-Drilling Cap Screws, Six (6) Plastic Retaining Rings.
Check Stock