Top Hf 13 56mhz Wristband

Larsen - 3/4' Hole Mount Antenna with 0-6 GHz Frequency No Connector

  • The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation..
  • L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting..
  • Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz,B077HRNLHZ), TC-HC152U (400-470Mhz, B077HXNJ1F ) or HYS SDN1(144/430Mhz, B07P71M8M5), easy install and match perfectly..
  • Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna..
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..
Check Stock

Credit Card Protector By VSR Premium RFID Blocking Shield Passport Debit IDs NFC Fraud Guard Contactless Scam Scanner Data Copier Signal Vault Safe Block Cloning Pickpocket Hack Proof Fits Any Wallet

  • ✔ THE ORIGINAL SAFETY CARD THAT WORKS This Is A Must Have Item For Anyone Fits Perfectly In Any Wallet - Go Buy Your Self One And Feel Safe .!.
  • ✔ PROTECT DATA Ids From Long Distance Skimmer Electronic Scanning Device Duplicator Writer Reader Copier Cloner Machines Smart Phones etc. Simply ADD This Card In Your Bag Wallet Tote Or Purse Where Keep Store Your CC or Passports Travel Accessories ..
  • ✔ UNIQUE SHIELD TECHNOLOGY This Gadget Would Effect Both HF 13.56 Mhz / LF 124 Khz Chip Frequency Signals.Best Defence From Long Distance Hackers Programmer Remote Scanning ..
  • ✔ ISO STANDAR SIZE Slim Mini 85.5 x 54mm x 0.76mm Thickness.Aluminium Inlay Insert PVC RF ID NFC Blocking Shielding Materials ..
  • ✔ BUY YOURS TODAY Consider Add More And Give A Great Present To Friends Family. WE SUGGEST To Place 2 Cards On Wallet For Ultimate Protection ..
Check Stock

TWAYRDIO 3-30MHz HF Radio Power Amp with Mini Cooling Fan Support FM/AM/SSB/CW Mode Only for HF Handheld Radio

  • Frequency range: 3-30MHz. Perform best on 20-30Mhz (15meters, 12meters, 10meters) When the amp works bellow 20Mhz, the output power will be lower and VSWR will be higher than it works on 20-30MHz, and the temperature also will get higher..
  • Working mode FM-AM-CW-SSB. FM mode: max output power 150W (when input 10W). AM mode: max output power 150W (when input 10W). SSB mode: max output power 300W (when input 10W)..
  • Only work for HF handheld radio. If you are not sure whether your radios will work with this product, please email us or ask questions..
  • Recommended this product to hams with years of experience in operating power amp or people with patience and study spirit..
Check Stock

TinySA Spectrum Analyzer,Handheld Tiny Spectrum Analyzer TinySA 2.8inch Touch Screen,Portable Frequency Analyzer 0.1MHz~ 960MHz MF/HF/VHF UHF Input, Signal Generator with Battery

  • 【Input Frequency Range】Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz..
  • 【2-in-1】Built-in calibration signal generator that is used for automatic self test and low input calibration.When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz..
  • 【2.8inch Touching Display Screen】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Display resolution 320*240 pixels.Color display showing 290 scan points covering up to the full low or high frequency range.Scanning speed of over 1000 points/second using largest resolution filters..
  • 【PC Controlled 】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.*Resistive touch contro*Jog switch control*USB serial port control.
  • 【Package List】1x Tiny Spectrum Analyzer.
Check Stock

New Tram Browning Black 1246-B Trunk Antenna Mount NMO With PL-259 connector and 17Ft of RG-58 Coax Cable

  • The mount is a "trunk lid" mount with 13'/about 4m RG-58 cable..
  • The flange to the left hooks under the lid of a vehicle trunk..
  • Stainless steel brackets and corrosion resistance hardware.
  • Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna. Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz) or TC-HC152U (400-470Mhz), easy install and match perfectly.
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..
Check Stock

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only)

  • Includes 1x RTL-SDR Blog brand R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle (V3) (Dongle Only).
  • Several improvements over other brands including use of the R820T2 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminium shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set..
  • Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only..
Check Stock

TKDY CA-110 CA110 Camcorder Charger kit for Canon VIXIA HF R800 R700 R500 M50 M52 M500 HF-R70 HF-R72 HF-R700 R50 R52 R60 R200 R300, LEGRIA HF R206 R26 AC Power Adapter.

  • FUNCTION: This Compact Canon CA-110 camcorder charger AC Adapter.
  • compatible with original Canon EH-67 adapter..
  • COMPATIBLE: This CA110 Power Supply fit for Canon VIXIA Series: HF R800 R700 R500, HF M50, HF M52, HF M500, HF R20, HF R21, fit for Canon LEGRIA Series: HF R26, HF R27, HF R28, HF R46, HF R48, HF R406, HF R56, HF R506, mini, mini X.
  • PRODUCT SPECIFICATION: Power: 8W, Input: 100V-240Vac 1.5Amax 50/60Hz.
  • ADVANTAGE: Exactly implement for lengthy studio shoots with no need to continuously replace and recharge multiple batteries. Convenient for studio shoot and when you are downloading, processing or viewing photos or videos when connected to your PC, TV or VCR..
  • PACKING LIST: 1*9 Foot Connector US AC Cable.
  • Combination purchase tips: CA-110 AC Power Adapter USB Cord. (ASIN:B07BRT1FH8)..
Check Stock

Mini USB Portable Reader Swipe Mini DX3 Collector for MSR 605 MSR X6 Card Reader

  • SUPPORT 10 FREQUENCY: ID-125KHz, ID-250KHz, ID-375KHz, ID-500KHz, ID-625KHz, ID-750KHz, ID-875KHz, ID-1000KHZ, IC13.56MHz (ISO1443A/B), HID125kHz Prox....
  • NOTE: The software of our machine is only compatible with Windows system, not working with MAC system or Linux system.
  • Support read: EM4100/EM4200, Mifare classic, UID cards, Ultralight, Ntag203, 1386/1326/1346.
  • Support cards write: 1386/1326/1346, T5577, EM4305,....
  • It can crack 13.56mHz encryption cards. (This device only supports partial sector encryption IC card, does not support all sectors encryption IC....
  • The machine is plugged into the computer, there is a disclaimer when it is turned on. At this time, do not press the "OK" button on the machine. Enter....
Check Stock

ETEKJOY ACR122U NFC RFID 13.56MHz Contactless Smart Card Reader Writer w/USB Cable, SDK, 5X Writable IC Card (No Software)

  • #1. No software provided. You have to get a third-party application/software to work with it by yourself. It is professional hardware. If you are not familiar with it, don’t buy. #2. It works for frequency 13.56MHz only. It doesn’t work for other frequencies..
  • USB interface. CCID standard. PCSC compliant..
  • Read/write speed up to 424 kbps. Card reading distance of up to 50 mm (depending on tag type)..
  • Frequency: 13.56MHz. Support ISO 14443 Type A and B, Mifare, FeliCa, and all 4 types of NFC (ISO/IEC 18092) tags..
  • Support new Mifare Ultralight C (via pseudo APDUs) and Mifare Plus SL1 (4 Byte UID, via pseudo APDUS) and SL3..
Check Stock

Fumei CO301M Heavy Duty Wideband Three-Position Coax Switch DC-800MHz Antenna Switch with SO-239 Connectors

  • Heavy duty coax switch, up to 1,500 watts at HF frequencies.
  • Low Insertion Loss: DC-500MHz 60dB, 500-800MHz > 50dB.
  • Frequency Range and VSWR: DC-500Mhz < 1.1, 500-800MHz < 1.2.
Check Stock

Portable TinySA Spectrum Analyzer, SEESII Upgraded V0.3.1 Tiny Frequency Analyzer with Antenna SMA Male to UHF Female Cables, 100kHz to 960MHz MF/HF/VHF UHF Input, 2.8'' Touchscreen Signal Generator

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use..
  • 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These co....
Check Stock

40PCS NFC Tags NTAG215 NFC 215 Cards 504 Bytes Memory Blank PVC Cards Ntag215 NFC Chip for NFC Phone and Device Writeable Programmable

  • 1) This device is used to read and copy 125KHz and 13.56MHz frequency RFID key cards..
  • 2) Support card type: for 125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc. Can't support HID chip..
  • 3) Support card type: for 13.56MHz IC type: Mi-fa re 1k, UID, FUID, CUID, UFUID, IC Half-encryption, IC Full-encryption etc. (Not all type encrypted....
  • 4) Provide free software, very easy to use. Mini and light weight. Connect this device to your computer with the USB cable, then can find the....
  • 5) Has a USB interface, Two-color LED light prompt. Built-in buzzer "beep" sound reminder. Package including 1RFID copier + 1 USB cable + 5 RFID T5577....
Check Stock