Top Hi Spec Circular Saws

Missvig Cosplay Wig Demon Slayer Short Gray White Halloween Wig Synthetic Hair Anime Custom Party Hair

  • Incremental trim feature makes tool-free adjustments by 1/16 inch.
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws.
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
  • Cuts circles from 4″ to 19″ in diameter.
  • 4 metal bars and special clips accommodate most circular and jig saws.
Check Stock

SKIL 75740W 7-1/4-Inch 40-Tooth Carbide Tipped Circular Saw Blade for SKIL Circular Saw 5280-01/5180-01/5080-01

  • Carbide teeth can last up to 60 times longer than standard steel blades.
  • Compatible with 7-1/4" diameter circular saws 5280-01/5180-01/5080-01.
  • Included components: 7-1/4-Inch 40-Tooth Carbide Tipped Saw Blade.
  • Enjoy smooth cutting performance for framing and general-purpose cutting with the Skil 40-Tooth Carbide-Tipped Saw Blade. It comes with sharp cutting edges and induction hardened teeth for durability. This 7-1/4" circular saw blade fits most standard circular saws. It comes with a clear, anti-stick coating that helps reduce friction and binding during use. The Skil saw blade also comes with a 5/8" diamond knock-out arbor to make installation and removal easy..
Check Stock

Ghostrunner - PlayStation 5

  • Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
  • Perfect for slicing through fiber cement board and laminate flooring.
  • Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
  • Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
  • Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.
Check Stock

GALAX PRO Circular Saw Blade 7 1/4\(185MM) 24 Tooth and 48 Tooth Tungsten Carbide Tipped Circular Wood Cutting Saw Blade with 5/8\(16mm) Arbor for Wood Cutting(Pack of 2)

  • This TCT Circular saw baldes are designed as general cross cut blades. The 24 tooth blade is used for frame cutting of soft woods, pressure treated lumber and MDF.
  • The 40 tooth blade is best used for smooth finely finished cuts in plywood.
  • Cutting blade is made of tungsten carbide tip.
  • Tungsten carbide teeth provide excellent wear and heat resistance.
  • Positive cutting angle which provides fast and efficient removal of chips and swarf, cutting smoothly.
  • Delivers accuracy and resists bending and deflection for true cuts.
  •  Heat expansion slots allow the blade rim to expand and contract without warping for straight and accurate cuts and minimize heat and vibration.
  • 7 1/4 inch circular saw blades are ideal set for all your cutting needs.
  •  Both blades have a 5/8 inch arbor to fit circular saws and miter saws that require this size blade.
  •  Also suitable for GALAX PRO GP76331 and GPL12367 circular saw.
  • What you get: 1* 24T tungsten carbide tipped circular wood cutting saw blade, 1* 48T tungsten carbide tipped circular wood cutting saw blade, 1* Information Card.
Check Stock

Concord Blades WCB1400T120HP 14-Inch 120 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

  • Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick.
  • For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,000.
  • Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood..
  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
  • 3.0 mm kerf design, ATB Grind & 15Degree hook.
Check Stock

High Accuracy Cutting Saw Blade Web 4.5in Circular Saw Blades Cutting Wheel Round Cutting Disc Hard Alloy 3PCS 40 Teeth with Gasket for Wood Processing

  • The circular saw cutting blade is made of high‑quality hard alloy and is very durable..
  • It is suitable for table saws or circular saws in all cutting of softwood, hardwood, chipboard or plywood..
  • The neatly arranged teeth are very incisive and make sure that the cutting is fast and smooth..
  • This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
  • This universal circular saw cutting blade is specially designed for wood cutting for various purposes..
Check Stock

MASTEC 8 Inch 64 Tooth Circular Saw Blade Anti Kickback Tooth for Wood Cutting with 5/8-Inch Arbor

  • 【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws..
  • 【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard..
  • 【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting..
  • 【Specification】:8 inch 64T fine finishing wood cutting blade with a 5/8 inch arbor..
  • 【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours..
Check Stock

Whirlwind USA MGSB 7 1/4 Inch 60 Teeth Circular Saw Blade for Wood,Carbide Cordless Miter/Table Saw Blade,7/8-5/8 Arbor

  • High quality and professional grade for ripping and crosscu tting of thick hardwood to 3-1/2" thick and softwood to 1" thick..
  • The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws..
  • Ideal for cutting hardwood, softwood, exotic wood and abrasive wood..
  • Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure..
Check Stock

Hi-Spec 121 Piece 160W 1.4A Corded Rotary Power Tool Kit Set with Dremel Compatible Bit Accessories Drill Cut Trim Grind & Sand In DIY Repairs Hobbies & Craftwork

  • ROTARY TOOL VERSATILITY: For fine DIY work, precision craftwork and specialist hobbies, take on the Hi-Spec 160W 1.4A Rotary Power Tool Kit. With its....
  • 120 PIECE ACCESSORIES: The versatility of the Hi-Spec 160W 1.4A Rotary Power Tool Kit is due its supplied accessory bits. Whatever the DIY repair or....
  • SPEED CONTROL: The Hi-Spec 160W Rotary Power Tool has an injection-moulded nylon body that safely houses its energetic 160W motor with a 1.9m cord for....
  • BIT ACCESSORY SET: Get going now on that project with its supplied, Dremel compatible, bit accessories neatly stored in a box. Fine cutting, drilling,....
  • EASILY CHANGE OUT BITS: Bit accessories fit with the interchangeable brass collets (sizes 1.5, 2.3 and 3.2mm) that securely hold-in the various types....
Check Stock

Delta Diamond Extreme 7 Inch Metal Cutting Diamond Blade, Heavy-Duty All Purpose Cut Off Wheel for Rebar, Steel, Sheet Metal, Angle Iron, Stainless Steel, & More, 7/8\-DM-5/8\ Arbor (7\)

  • ...nstant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust..
  • SPECIFICATIONS - 7" diameter X .110 thick with a 7/8"-DM arbor for Skil Saws. Included preinstalled 5/8" bushing for adapting to other circular saws and grinders. The maximum safe operating speed is 8,730 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Iron Cutting Saw Blade,Saw Blade Metal Circular Iron Cutting High Speed Steel Hardware Tools 355x2.6x2.0x25.4x66T

  • Fast cutting with long durability, negative rake angle design is suitable for hard materials.
  • Possess high hardness large cutter head, fine grinding surface, stable body.
  • Saw blade have stable structure, excellent performance and long service life.
  • Good-quality high-speed steel material, possess good strength, toughness, and strong wear resistance.
  • This equipment is used for circular saws, mitre saws, table saws, radial arm saws, etc..
Check Stock

CMT P10050 ITK Plus Combination Saw Blade, 10 x 50 Teeth, 1FTG+ 4ATB Teeth with Shear with 5/8-Inch bore

  • for rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance..
  • Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood..
  • 0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock