Top Hidden Deck Board Fasteners

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ...“C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ...“C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Deck Demon Wrecking Bar - 44 Inch Steel Deck Board Remover Tool - Save Time Removing Old Boards and Breaking Pallets - Heavy Duty, Non-Slip Handle with Dual Claw Head Nail Puller - Red, DD-201

  • Heavy Duty Demolition & Renovation Tool - Deck Demon is a versatile long handled steel deck pry bar with a dual tine crowbar head to efficiently remove boards, decking, siding, roof, strapping, fasteners, and nails without kneeling or straining your back.
  • Increase Your Efficiency - the breaker bar pry tool features a 44-inch handle with a padded non-slip grip (no gloves necessary) to help reduce your time and labor invested in deconstructing and renovating home improvement projects from a comfortable standing position.
  • Maximum Leverage - this pallet breaker tool straddles the stud/floor joist/beam as a fulcrum point and provides a more stable position for prying to make board splitting more like paper splitting. Great to use as roofing tools, flooring tools.
  • Dual-Claw Head - Deck Demon’s dual-claw head is designed to fit over single and double joists and features 2 beveled cats paw nail puller slots, for removing nails and screws. The patented rocker design removes decking without damaging the joists.
  • Wood Working Tools And Equipment - solid steel, commercial grade demolition....
Check Stock

Adjustable Bed Sheet Straps Suspenders Heavy Duty Elastic Sheets Band Holder Straps Long Fasteners for Twin Full King Queen Size Beds Mattress Pad Covers (Pack of 4 Pcs)

  • Sheet Band Straps Suspenders White Adjustable Bed Corner Holder Elastic Fasteners Clips Grippers Mattress Pad Cover Fitted Sheet. Width: 2cm/0.79inch Length: 18cm-38cm/7.09inch-14.96inch.
  • Our Sheet Straps fits with fitted sheet and flat sheet, Adjustable length allows desired tension. The newest and hottest product being used for keeping sheets tight all night long.
  • Great For Bed Sheets and Mattress Covers.
  • fitted sheet holder,bed sheet holder straps,bed sheet corner clips grippers straps,adjustable elastic sheet straps grippers,sheet fasteners.
  • CLIPS - Heavy Clips with rounded plastic teeth insert to ensure maximum hold and prevent damage to your fabric, Sturdy metal Adjusters will not fall apart. ELASTIC – Elastic is 100% Woven Polyester, will never lose its stretch and shape, the Elastic is ultra-tough to retain its elasticity use after use, and stretchable to conform comfortably..
  • Our high-quality Bed Sheet Fastener Secures your bed sheet while it’s still hidden from view, prevent uncomfortable sleeping and perform High quality freedom of movement. Works for all beds types queen, king, tw....
Check Stock

They Sold Their Souls for Rock and Roll (3-HR Version)

  • Conceals fasteners for the entire deck, including first and last boards, perimeter and stairs.
  • Each box includes (350) screws, (400) plugs and (3) set screws.
  • Plugs are made from OEM brand name deck boards, ensuring plugs match the decking.
  • Strong connection between deck boards and joists.
Check Stock

Gleaming The Cube

  • MADE BY SKATERS All of our boards are designed by skaters and inspired by our location in Southern California, the birthplace of longboarding. Many of our design cues come from the local surf culture and natural materials, we let the simple aesthetics shine on their own. We also prioritize our customer service and want you to be completely stoked with your new board. All messages are replied to within 24 hours and we’ll do our very best to ensure satisfaction and maximum cruising on our boards..
  • PERFECT FIRST BOARD We found that the traditional size and shape, around 31 inches long and 8 inches wide, was too long and heavy for kids. We ended up with a 27.5-inch long deck that is 7.75 inches wide. Kids' feet fit perfectly on this deck without the added length and weight. The kids we worked with learned to skate a lot faster with boards that were designed for them instead of the bigger heavier boards that are typically found on the market..
  • SHORTER BOARD At 27.5 inches, the deck is a little shorter than a traditional skateboard making it the perfect size to learn on. As we were designing this board we learned that a smaller size is pretty fun for adults too! Advanced skaters looking to skate mini ramps or in small skate parks will have a blast with thi....
Check Stock

DeckWise (Black) Ipe Clip Extreme S Hidden Deck Fasteners, 5/32' Gap, Stainless Steel Black #8x2' Trim-Head Screws for 300 Sq.Ft. of AD and KD Hardwood, Thermal or Composite Decks (525 Bucket)

  • (570) #8×2″ T15 Stainless Steel Screws.
  • Automatically spaces deck boards at 5/32″ (4mm).
  • Manufactured from polyethylene with stainless steel black oxide insert.
  • Reduces fastener tilting during installation improving gap consistency.
  • For use with air/kiln dried hardwood, composite, or PVC decking.
Check Stock

Craftsman V-SERIES Hex Key Allen Set, MM, 9 Piece (CMHT26139V)

  • EXTRACTION - X-Tract Technology designed to remove fasteners up to 50% rounded.
  • ROUNDING PREVENTION - Designed to help prevent rounding and stripping of new fasteners.
  • DURABILITY - Premium S2 Steel for advanced strength and durability.
  • ACCESS - Ball-end offers angled access to hidden or hard to reach fasteners.
Check Stock

Fasten Master Cortex 2-1/2inch Fastening System for Azek Coastline Decking -100 Square Feet

  • Conceals fasteners for the entire deck, including first and last boards, perimeter and stairs.
  • Each box includes (350) screws, (400) plugs and (3) set screws.
  • Plugs are made from OEM brand name deck boards, ensuring plugs match the decking.
  • Strong connection between deck boards and joists.
Check Stock

Mxeol Boat Stainless Steel Cam Latch Marine Hatch Pull with Back Plate Fasteners

  • Cam latch measures 2-5/8" OD and 2" hole diameter. Overall Height: 3".
  • Boat hatch latch, range of locking adjustment: 1-1/4" to 2-3/4".
  • Stainless steel cam latch, offers 3mm (1/16") compression..
  • Boat deck latch, the red dot indicator for latched position. We do advise customer to use thread lock with the fasteners to make the latch stable tightly under marine situation..
  • The fasteners of the marine latch are standard matched (the bolts are 1.28" length.) you could use different sizes fasteners on ur need..
Check Stock

Short Longboard - Summit Board Co - Mini Longboard Cruiser (Prism)

  • MADE BY SKATERS All of our boards are designed by skaters and inspired by our location in Southern California, the birthplace of skateboarding. Many of our design cues come from the local surf culture and natural materials, we let the simple aesthetics shine on their own. We also prioritize our customer service and want you to be completely stoked with your new board. All messages are replied to within 24 hours and we’ll do our very best to ensure satisfaction and maximum cruising on our boards..
  • NATURAL DECK MATERIALS The 22” Teal Micro Cruiser is designed for those looking for a simple but beautiful board with a hint of bold, crisp design elements. A hard maple deck gives the board a natural look while providing the strength and support for cruising almost anywhere. This board was designed to be portable and for cruising on the go..
  • CLASSIC CRUISER SHAPE A classic deck with wheel wells cut in the bottom of the deck to prevent wheel bite. The deck is 6 inches wide to provide enough space for your feet while easy to carry around with you. The slight kickball on the back gives you a bit more control as well. If you're looking for a super-compact board w....
Check Stock

Miuphro KN95 Face Mask, 5-Layer Design Cup Dust Safety KN95 Masks 50 Pack, Gray

  • Each box includes 224 screws, 300 plugs and 2 setting tools.
  • Conceals fasteners for the entire deck, including first and last boards, breaker boards, perimeter and stairs.
  • Plugs are made Trex deck boards, ensuring plugs match the decking.
Check Stock