Top Hidden Decking Screw Driver Tool

DeckWise (Black) Ipe Clip Extreme S Hidden Deck Fasteners, 5/32' Gap, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq.Ft. of AD and KD Hardwood, Thermal or Composite Decks (1050 Bucket)

• (1140) #8×2″ T15 Stainless Steel Screws.
• For use with air-dried and kiln-dried lumber along with composite or PVC decking.
• Allows for expansion and contraction of all compatible wood and decking types.
• Made from polyethylene with stainless steel black oxide insert.

CAMO Marksman Pro Kit Deck Tool 1750 Edge Screws & Bits Edge Fastening Installation 3/16 Spacing Fits 5-1/4-5-3/4 Composite Decking 0345001 …

• ALL IN ONE KIT - Marksman PRO Tool, (1750) 2-3/8" Edge Screws (covers approx 500 sqft) and 2 replacement driver bits..
• FASTENER FREE DECK SURFACE - installs two patented CAMO Edge Deck Screws through the edge of the deck board—not the surface—for a beautiful deck top.
• AUTOMATIC SPACING - creates automatic 3/16 in. (5mm) spacing - ideal for composite and PVC decking.
• COMPOSITE AND PVC DECKING - Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board.
• REDUCE SPLITTING & CRACKING - For exclusive use with CAMO Edge Deck Screws that auger material out to reduce splitting and cracking.

Screwdriver Diversion Safe Hidden Stash Storage Container

• HIDE YOUR VALUABLES in plain sight with this popular stash can. Having a screw driver around is very discrete. Nobody would suspect that your....
• AUTHENTIC - Made from a real screw driver. You could easily place this among a dozen others and there would be no difference..
• HIDDEN COMPARTMENT is accessed by unscrewing the bottom lid which has the tab still intact..

Wiha 38450 Bit Holding Screwdriver with SoftFinish Handle, 1/4\ x 125mm

• MULTIPLE DIFFERENT FITS – The B50 comes with a multitude of diameter sleeves, to fit on a variety of screwdrivers and drill bits. Simply slide your Magnet Driver sleeve over the properly fitting power bit and utilize the rare earth magnet to help keep your bits in place. Traditional magnetized bits may help to keep the screw in place but lack the strength to keep the bit from falling off..
• NEODYMIUM MAGNETS – Rare-earth magnets are extremely powerful, ensuring that your screw stays attached to the bit. The design of the Magnet Driver keeps your screw straight, helping to prevent cross-threading by ensuring a direct drive. This also helps to prevent stripped screws, as the Magnet Driver will keep your screw securely fastened onto your screwdriver..
• COLOR CODED – Don’t fumble around your tool kit looking for the correct size. The Magnet Drivers easily identified colors allow you to find the proper size with ease. Every item in the Magnet Driver line contains the same color-coded sizing, so no matter which set you get, all sizes will be easily found. Don’t waste time looking for the right bit – use the Magnet Driver to save time and energy!.
• VERSATILE – Whether you are using a screwdriver or impact driver, the Magnet Driver was made to work w....

CAMO EDGEXMETAL Clip Hidden Deck Fasteners (450 ct)

• For any angled installation of grooved decking—hardwood, composite, capped composite, and PVC.
• Works with any 14–18GA metal framing, including Fortress Evolution and Trex Elevations.
• Fasten EDGEXMETAL Clips with the included NEVER-MISS Guide or with the CAMO DRIVE stand-up tool using a drill—do not use an impact driver.
• Up to 88% stronger than leading deck board manufacturer’s clips in lateral movement tests.
• 450 count covers approximately 250 square feet (23m2) and creates a 3/16-inch (4.7mm) gap.

CAMO DRIVE Deck Tool, Stand Up Drill for Decking, Edge, Clip & Face Fastening System

• 3 FASTENING OPTIONS - DRIVE can be used for Edge, Clip, and Face fastening on any deck board surface.
• FASTER INSTALLATION - Install decking up to 5X faster and all while standing up.
• CAMO - Use exclusively with CAMO Collated Edge Deck Screws, CAMO EDGE Clip/EDGEX Clip, and CAMO Collated Face Deck Screws.
• HEAVY DUTY - The contractor grade tool is fast and reliable and has a one-year warranty.
• ATTACHES TO YOUR DRILL - The cordless stand-up tool attaches to your drill and comes with 3 quick-change fastening guides. Not for use with an Impact Driver.

Quick Screw Gutter Hangers 5 Inch- 50 Pack - 5 Inch Gutter Clips with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

• 5" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 5-inch aluminum (non-plastic) gutters..
• FIX SAGGING GUTTERS & LOW SPOTS - Use our 5 inch gutter clips to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
• HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
• EASY INSTALLATION W/ NUT DRIVER - Install the 5 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
• INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. The....

Quick Screw 6 Inch Gutter Hangers - 25 Pack - Gutter Brackets 6 Inch with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

• 6" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 6-inch aluminum (non-plastic) gutters..
• FIX SAGGING GUTTERS & LOW SPOTS - Use our 6 inch gutter hangers to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
• HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
• EASY INSTALLATION W/ NUT DRIVER - Install the 6 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
• INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. T....

CAMO Drive Collated Edge Deck Screws 2-3/8 ProTech 1000 ct

• For use in 1" and 2x (1-1/2") thick treated lumber, composite, capped composite, or PVC decking.
• Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
• Rake tip augers material out, Trimhead reduces visibility on edge, ProTech coating is ACQ Compatible.
• 1000 ct package covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
• Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.

CAMO Drive Collated Edge Deck Screws 2-3/8 Stainless Steel 1000 ct

• Use in 1" and 2x (1-1/2") thick wood, composite, capped composite, or PVC decking in areas near open water.
• Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
• Rake tip augers material, Trimhead reduces visibility on edge, 316 Stainless Steel resists corrosion.
• 1000 ct pkg covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
• Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.

I-MART 3 Pcs Offset Screwdriver Set Right Angle Phillips Screw Driver, Flat Head

SHARDEN Ratchet Screwdriver 13-in-1 Ratcheting Screwdriver Set Multi Screwdriver Tool All in One with Torx Security, Flat Head, Phillips, Hex, Square and 1/4 Nut Driver

• 【Ratcheting Mechanism】Ratcheting screwdriver breaks through the limitations of the direction, convenient switch for clockwise(fastening) and counter clockwise(loosening) ratcheting and locking position(as standard multi-bit screwdriver), saves time and effort, enables easier all-day driving.
• 【Tool Saver】SHARDEN versatile 13 in 1 multi screwdriver includes a 1/4 inch nut driver and 12 common used screwdriver bits: T15/T20 Security Torx, 4mm/5mm/6mm Flathead, PH1/PH2/PH3 Philips, H4/H5 Hex, and SQ1/SQ2 Square. All the bits needed in one ratchet screwdriver set, reduce the number of tools you must carry.
• 【Space Saver】Ratcheting screwdriver set stores 12 changeable tips in the handle with an integrated bit holder. It's convenient to screw off the end cap and switch the bits. The screw driver handle is 5.90" length, takes up very little space, fits into pocket, also suit for EDC, kitchen drawer, tool belt, tool box or backpack.
• 【Humanized Design】Our screw driversets set has been professionally designed to maximize your repair capabilities. Cushion grip bi-material handle provides superb comfort, slip resistant and maximum torque. Magnetic bit holder ensures speedy and secure bit changes while the 1/4 bit holder applies to standard 1/4" bits.