Top High Borosilicate Glass Tube

Conical Centrifuge Tube 50ml, PP Material,2 Racks&40 Centrifuge Tubes(50ml 40Tube)

  • GLASS CENTRIFUGE TUBE: These PYREX borosilicate glass tubes are convenient lab equipment for centrifugation up to 3,000 RCF and are supplied with screw caps..
  • REUSABLE TEST TUBE: Offering exceptional clarity, the glass test tubes offer good thermal and chemical resistance, and are ideal scientific culture tubes for biology, chemistry and industrial use..
  • SCREW CAP: The centrifuge tube is finished with a round bottom and a threaded phenolic cap with durable white rubber liner, giving a secure seal..
  • EASY TO CLEAN: The reusable glass tube with cap is easy to clean and can be sterilized safely in autoclaves at 121°C, making them ideal lab glassware for busy environments..
  • PYREX GLASSWARE: PYREX scientific glassware has been a trusted partner for chemists and research scientists in the toughest laboratory environments for more than 100 years..
Check Stock

Platinum Wire, Supplied in Glass Tube - for Flame Test - Eisco Labs

  • Supplied in borosilicate glass tube, fused into glass handle.
  • Tube measures 5 inches long and 0.6 inches in diameter. Wire measures 18-20mm long and approximately 0.12 mm in diameter..
Check Stock

American Educational 7-302-9 Borosilicate Glass Liebig Condenser, Straight Inner Tube, 200mm Length

  • Liebig condenser used for distillation applications has straight inner tube that increases surface area for cooling the condensed liquid for high-speed condensing.
  • Borosilicate glass for clarity, strength, and heat- and chemical-resistance.
  • Inlet and outlet tubes are on opposite sides of the tube.
Check Stock

Extraction Proz 50-EXT-30 Glass Extractor Extraction Filter Tube 30' Long 50mm Diameter Clear with Stainless Steel Clamp

  • LAB GRADE GLASS - Made with Borosilicate Glass(Pyrex) Annealed at 1050 F Degrees to remove any stress from the glassware. This will make the glass stronger than poorly annealed or stressed glass..
  • 50mm DIAMETER / 2.0 INCH x 30 INCH LONG - The extra wide tube has more volume than other smaller tubes allowing more material to contained inside the tube. This will reduce the amount of runs needed to process all your material..
  • MADE IN USA - Proudly Hand blown here in Southern California, accept no substitutes. Don't risk your material by saving a few dollars..
  • STAINLESS STEEL CLAMP - The included stainless steel clamp will keep your filter securely in place so you can pack your tube with material and no worry about the filter coming loose. [ DO NOT OVER TIGHTEN CLAMP - IT CAN SHATTER THE TUBE ].
  • SATISFACTION GUARANTEE - Love your tube or we will buy it back from you - Simple as that..
Check Stock

Extraction Proz 50-EXT-12 Glass Extractor Extraction Filter Tube 12' Long 50mm Diameter Clear with Stainless Steel Clamp

  • LAB GRADE GLASS - Made with Borosilicate Glass(Pyrex) Annealed at 1050 F Degrees to remove any stress from the glassware. This will make the glass stronger than poorly annealed or stressed glass..
  • 50mm DIAMETER / 2.0 INCH x 12 INCH LONG - The extra wide tube has more volume than other smaller tubes allowing more material to contained inside the tube. This will reduce the amount of runs needed to process all your material..
  • MADE IN USA - Proudly Hand blown here in Southern California, accept no substitutes. Don't risk your material by saving a few dollars..
  • STAINLESS STEEL CLAMP - The included stainless steel clamp will keep your filter securely in place so you can pack your tube with material and no worry about the filter coming loose. [ DO NOT OVER TIGHTEN CLAMP - IT CAN SHATTER THE TUBE ].
  • SATISFACTION GUARANTEE - Love your tube or we will buy it back from you - Simple as that..
Check Stock

DADAKEWIN 120mm Allihn Condensers, Joint 14/23, 3.3 Borosilicate Glass Standard Ground Mouth Heat Resistant Scientific Lab Condensers- Pack of 1 (Capacity : 120mm)

  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Made of 3.3 Borosilicate Glass, high temperature & corrosion resistance..
  • the Allihn condenser is designed with an inner tube consisting of a series of bulbs which increase the surface area available for vapor condensation surrounded by an outer jacket tube, the cool water flows through the outer jacket to condensate the vapor in the inner tube..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
  • Model Number: Allihn condenser 120mm 14/23.
Check Stock

Thermo-Hydrometer ABV Tester Triple Scale for Beer/Wine - Pro Series American-Made Specific Gravity Hydrometer with Thermometer Temperature Correction, N.I.S.T Traceable (KIT)

  • ....S.T. Traceable Triple Scale Hydrometer with built-in Thermometer and conversion chart & Test Jar Combo – with Cylinder Brush - Specific Gravity Alcohol ABV Tester handblown by multi-generational American glass blowers in America, Glass Test Tube Beaker - for Wine, Beer, Cider, Mead - Homebrew Fermented Beverages Borosilicate 3.3 Cylinder and temperature compensated hydrometer. An elite brewer tool!.
  • ✔️ KNOW YOUR BREW & CRAFT YOUR BEST EVERY TIME: Take accurate gravity readings by simultaneously knowing your temperature and gravity, quickly. We are home brewers too and love offering the highest quality brewing equipment, tools and wine making supplies to help you succeed in crafting the tastiest brews. Our Brewing America meter scale is easier to read. We designed our GLASS Test Cylinder to be the highest quality with thick and sturdy lab grade borosilicate glass..
  • ✔️ WASTE LESS PRECIOUS HOMEBREW! We designed our glass test jar to use less liquid (wort or must) to conduct your hydrometer tests. Use only 125 ml instead of a 250 ml as most others require. Waste less, drink (or share) more! SOLID 1-piece THICK borosilicate (Boro) 3.3 glass test flask with bumper guard. It is STURDY and STABLE. BREWERS Prefer Glass Test Jars: We all know sanitiza....
Check Stock

DWK Life Sciences 73500-1275 Disposable Borosilicate Glass Culture Tube, 6mL Capacity, 12mm Diameter, 75mm Length, Pack of 250

  • 51 expansion borosilicate glass offers excellent chemical resistance against sodium leaching, a factor common in soda lime glass products.
  • Tubes are packed in convenient trays for ease of use on bench tops and in drawers.
  • The 6x50mm size is often referred to as a "Durham tube".
  • Trays are shrink-wrapped in plastic film, with tubes remaining in constant alignment for protection against in-transit breakage and contamination.
  • Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements.
Check Stock

DADAKEWIN 400mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 400mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/40, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 29/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 29)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 300mm/24 * 29)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock