Top High Clearance Jack

BAOSHISHAN 4 Ton Bottle Jack Double Ram 6-1/4\ to 15-3/8\ Lifting Range Hydraulic Jack Car Jack Portable with Carrying Case

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 4 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/8"..
  • [WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 4 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or ma....
Check Stock

CURT 28156 Marine Boat Trailer Jack with 6-Inch Wheels, 1,500 lbs. 10-3/8 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,500 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue.
  • CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with dual 6-inch diameter trailer jack wheels.
  • EASY OPERATION. This trailer tongue jack allows for 10-3/8 inches of vertical movement and operates using a side-wind handle (12-5/8-inch retracted height, 23-inch extended height).
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a durable zinc-plated finish.
Check Stock

ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector

  • ...has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch width and 0.75-inch depth (1cm x 1.9cm).
  • To ensure fitment, measure ID of your jack and compare to 5.5-inch diameter of this jack rubber stabilizer pad while ensuring your vehicle has enough clearance – this jack stands pad adds 1 inch (2.5cm) to height.
  • PACKAGE CONTENTS: Stabilizing jack pads package includes (1) 5.5-inch pinch weld protector slotted jack pad to best suit your needs – Jack rubber pad only – jack not included.
Check Stock

BAOSHISHAN 3 Ton Bottle Jack Double Ram 6-1/2\ to 16-1/2\ Lifting Range Hydraulic Jack Car Jack Welded Bottle Jack Portable with Carrying Case

  • ..., which has a better range of motion than a traditional single ram 3 ton bottle jack. You have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height..
  • [BETTER RANGE OF MOTION] - The 6-1/2" starting height allows small bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 16-1/2"..
  • [WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 3 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [STURDY STRUCTURE] - Although the main bottle is only slightly larger than a 12oz soda can, and the overall weight is about 5.5 pounds, the compact bottle jack with high-quality alloy steel structure to ensure quality and durability. BAOSHISHAN provides ONE-year Warranty for the double ram jack..
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

Pro Series A-Frame Round Trailer Jack 5000 lbs 15 Lift W/Footplate & 6 Wheel

  • 2 1/4" Diameter jack , Travel 15in, Retracted 10.8.
  • Extended 25.8" Clearance 14.55" Capacity 5K Lbs.
Check Stock

Delaman Jack Pad Rubber Block for Hopper Stock Bin Durable Frame Protector 65x33mm

  • 【Capacity】This boat trailer jack is rated to support up to 1500 lbs, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue, 360 degrees rotatation double wheel make it stronger bearing capacity.
  • 【Size】Travel Distance Length: 10 inch (254mm), Retracted Length: 12.6 inch (320mm), Extended Length: 22.6 inch (574mm) (measured from center of mounting plate to bottom of wheel).
  • 【Convenient Mobility】For easier coupling and positioning of your boat trailer, this jack comes with an 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place.
  • Swivel Design】To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket with the 1/2" pull pin..
  • 【Corrosion Resistant】This marine boat trailer jack is protected in a durable zinc-plated finish, for long-lasting corrosion resistance against water, dirt, road salt and more.
Check Stock

Boat Trailer Jack,Heavy Duty Trailer Jack with 6 Inch Dual Wheels,1500 lbs Swivel Trailer Tongue Jack,Bolt-on Trailer Jacks,10\ Vertical Travel, Black

  • ...f use, this trailer jack stand is equipped with a swivel bracket,can 360° swivel.the jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place,pivot up to stow parallel to trailer tongue for travel, move back into upright position for use.providing plenty of ground clearance for your trailer tongue..
  • 【Bolt-on Installation】Supplied with mounting bolts(the bolt size:M10*4in) ,to mount up to a 3"(W) x 5"(H) Trailer Tongue Jack frame.3 holes for you to installation,it is 2inch, 2 - 3inch, 3 - 4inch..
Check Stock

Arcan 2 Ton Low Profile Quick Rise Steel Floor Jack A20015

  • LOW PROFILE FRAME: For easy access under low ground clearance vehicles..
  • DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load..
  • UNIVERSAL JOINT RELEASE MECHANISM: Provides precise control of jack..
Check Stock

CURT 28356 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15 inches of vertical movement and operates using a top-wind handle (16-1/2-inch retracted height, 31-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

CURT 28300 Weld-On Bracket-Style Swivel Trailer Jack, 2,000 lbs. 10-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10-1/2 inches of vertical movement and operates using a top-wind handle (11-1/2-inch retracted height, 21-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel bracket for ready welding.
Check Stock

CURT 28354 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 10 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10 inches of vertical movement and operates using a side-wind handle (10-1/4-inch retracted height, 20-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock