Top High Corbon Steel

Big Autopart Valve Cover Bolts, Chrome Valve Cover Wing Bolts for Chevy V8, 4 Pack

  • ★High-quality materials ---- Stainless steel is resistant to corrosion, high temperature, low temperature, long service life, and reduces the cost of replacement. for sbc valve cover bolts wing nuts.
  • ★High-quality materials ---- Stainless steel is resistant to corrosion, high temperature, low temperature, long service life, and reduces the cost of replacement..
  • ★High-quality accessories ---- Matching the original car, it is worth buying high-quality accessor....
Check Stock

PROFORCE Forearm Guard Black Medium

  • High Elastic Long Glove Protective Sleeve Stainless Steel Wire.
  • Very durable. Super slash/cut proof. Antistatic.NOTE:Contains much steel wire, the density of the sleeve is very high that you may feel tight. But it....
  • Reduce the harm by sharp materials such as dagger, triangular scraper, glass, stone, etc..
Check Stock

COMP Cams 742-16 7 Steel Retainer Set of 16 for Chevrolet Small Block w/ 1.250\ OD Spring

  • Maximum Strength - Manufactured from chromemoly steel, COMP Cams' steel retainers are heat-treated and black oxided to ensure high strength and minimal warpage. This ensures long term durability and resistance to deformation..
  • Superior Quality - Instead of using cheap steel, COMP Cams' steel retainers are constructed from high quality chromemoly steel, ensuring high performance and resistance to deformation and cracking..
  • Precision Machined - Manufactured in house using high tech machines, COMP's chromemoly steel retainers are precision machined to ensure optimum load distribution, greater strength and durability..
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32" and 3/8" valve stem diameters, COMP Cams has a steel retainer for your engine..
  • 10 degree lock angle and is designed to fit 1.500"-1.550" Outside Diameter valve springs.
Check Stock

BOSCH CO2143 1/4 In. x 4 In. Cobalt Drill Bit

  • Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF).
  • Rigid, thick web design adds stability to bit in tough applications.
  • Surface hardened to penetrate tough abrasive materials, Cuts through light gauge metal, high carbon steel, aluminum and alloy steel, cast iron and stainless steel.
  • Available in jobber length, full shank, Drill Point Angle is 135 degrees, Surface Coating is uncoated (bright finish), Bit type is Twist.
  • Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium.
Check Stock

COMP Cams 748-16 10 Degree Superlock Steel Retainer Set of 16 for 1.500\-1.550\ OD Valve Spring

  • Maximum Strength - Manufactured from chromemoly steel, COMP Cams' steel retainers are heat-treated and black oxided to ensure high strength and minimal warpage. This ensures long term durability and resistance to deformation..
  • Superior Quality - Instead of using cheap steel, COMP Cams' steel retainers are constructed from high quality chromemoly steel, ensuring high performance and resistance to deformation and cracking..
  • Precision Machined - Manufactured in house using high tech machines, COMP's chromemoly steel retainers are precision machined to ensure optimum load distribution, greater strength and durability..
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32" and 3/8" valve stem diameters, COMP Cams has a steel retainer for your engine..
  • 10 degree lock angle and is designed to fit 1.437"-1.500" OD springs like our 942.
Check Stock

COMP Cams 741-16 10 Degree Superlock Steel Retainer Set of 16 for 1.500\-1.550\ OD Valve Spring , Black

  • Maximum Strength - Manufactured from chromemoly steel, COMP Cams' steel retainers are heat-treated and black oxided to ensure high strength and minimal warpage. This ensures long term durability and resistance to deformation..
  • Superior Quality - Instead of using cheap steel, COMP Cams' steel retainers are constructed from high quality chromemoly steel, ensuring high performance and resistance to deformation and cracking..
  • Precision Machined - Manufactured in house using high tech machines, COMP's chromemoly steel retainers are precision machined to ensure optimum load distribution, greater strength and durability..
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32" and 3/8" valve stem diameters, COMP Cams has a steel retainer for your engine..
  • 10 degree lock angle and is designed to fit our 26120 Beehive springs.
Check Stock

COMP Cams 747-16 10 Degree Superlock Steel Retainer Set of 16 for 1.437\-1.500\ OD Valve Spring

  • Maximum Strength - Manufactured from chromemoly steel, COMP Cams' steel retainers are heat-treated and black oxided to ensure high strength and minimal warpage. This ensures long term durability and resistance to deformation..
  • Superior Quality - Instead of using cheap steel, COMP Cams' steel retainers are constructed from high quality chromemoly steel, ensuring high performance and resistance to deformation and cracking..
  • Precision Machined - Manufactured in house using high tech machines, COMP's chromemoly steel retainers are precision machined to ensure optimum load distribution, greater strength and durability..
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32" and 3/8" valve stem diameters, COMP Cams has a steel retainer for your engine..
  • 10 degree lock angle and is designed to fit 1.437"-1.500" OD springs like our 988 and 950.
Check Stock

1/4 Fender Washer Galvanized Stainless Steel Flat Washers (1/4\ x3/4\

  • ❤ Size: ID: 1/4"-0.25 inch, OD: 0.7 inch | Thickness: 0.06 inch | Quantity: 100 pcs.
  • ❤good material: fender washer is made of galvanized stainless steel, it is A grade stainless steel washer.
  • ❤ High hardness: galvanized stainless steel is better than ordinary steel, resistant to deformation and high strength, making it last longer than other hardware on the market today.
  • ❤ Corrosion resistant: fender gaskets have excellent rust resistance. Stainless steel flat washers resistant to seawater corrosion.
  • ❤ Flat washers: high quality stainless steel washers are worthy of our purchase and will support all your indoor and outdoor projects.
Check Stock

COMP Cams 744-16 7 Degree Steel Retainer Set of 16 for 3/8\ Valve w/ 1.437\-1.500\ Spring, Black

  • Maximum Strength - Manufactured from chromemoly steel, COMP Cams' steel retainers are heat-treated and black oxided to ensure high strength and minimal warpage. This ensures long term durability and resistance to deformation..
  • Superior Quality - Instead of using cheap steel, COMP Cams' steel retainers are constructed from high quality chromemoly steel, ensuring high performance and resistance to deformation and cracking..
  • Precision Machined - Manufactured in house using high tech machines, COMP's chromemoly steel retainers are precision machined to ensure optimum load distribution, greater strength and durability..
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32" and 3/8" valve stem diameters, COMP Cams has a steel retainer for your engine..
  • 7 degree lock angle and is specifically designed for use on our 26915/26918 Beehive springs on GM LS engines.
Check Stock

Skunk2 Racing 344-05-1300 Alpha Valve Spring and Titanium Retainer Kit for Honda B-Series Engines

  • Maximum Strength - Manufactured from chromemoly steel, COMP Cams' steel retainers are heat-treated and black oxided to ensure high strength and minimal warpage. This ensures long term durability and resistance to deformation..
  • Superior Quality - Instead of using cheap steel, COMP Cams' steel retainers are constructed from high quality chromemoly steel, ensuring high performance and resistance to deformation and cracking..
  • Precision Machined - Manufactured in house using high tech machines, COMP's chromemoly steel retainers are precision machined to ensure optimum load distribution, greater strength and durability..
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32" and 3/8" valve stem diameters, COMP Cams has a steel retainer for your engine..
  • 10 degree lock angle and is designed for use with 1.500"-1.550" OD springs like our 920, 914, 917928, 929, 924, 925, 954, 936, 938, 930, 953, 939 and 933.Made in USA.
Check Stock

Falcon Performance valve springs retainers locks kit compatible with Ford 289 302 351W 10-degree (Sprgs, Retainer & Locks)

  • Maximum Strength - Manufactured from tool steel, COMP Cams' tool steel retainers offer the best strength characteristics possible..
  • Superior Quality - Instead of using cheap steel, COMP Cams' tool steel retainers are made from high-grade tool steel, ensuring high performance and resistance to deformation and cracking..
  • Precision Machined - Manufactured in house using high tech machines, COMP's tool steel retainers are precision machined to ensure optimum load distribution, greater strength and durability..
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32" and 3/8" valve stem diameters, COMP Cams has a steel retainer for your engine..
Check Stock

Kryptonite New York FAHGETTABOUDIT 1410 14mm Chain & New York Lock 15mm Disc Lock

  • 14mm six-sided chain links made of 3t HARDENED MANGANESE STEEL for ultimate strength.
  • Durable, protective nylon cover with hook-n-loop fasteners to hold in place.
  • Includes maximum security New York Disc Lock with 15mm MAX-PERFORMANCE STEEL SHACKLE.
  • Patented*, oval hardened STEEL CROSSBAR for extra security.
  • Hardened DOUBLE DEADBOLT locking for extensive holding power.
  • HIGH SECURITY DISC-STYLE CYLINDER with reinforced anti-drill, anti-pull protection system.
  • SLIDING DUSTCOVER protects and extends cylinder life.
  • 3 STAINLESS STEEL KEYS – one lighted with high intensity bulb and replaceable battery.
  • Product dimensions: 3.25’ (100cm) chain length, 15mm shackle diameter.
  • 14mm six-sided chain links made of 3t hardened manganese steel for ultimate strength.
  • Includes maximum security New York Disc Lock with 15mm MAX-Performance steel shackle.
  • Patented*, oval hardened steel crossbar for extra security.
  • Hardened double deadbolt locking for extensive holding power.
  • High security disc-style cylinder with reinforced anti-drill, anti-pull protection system.
  • Sliding dustcover protects and extends cylinder life.
  • 3 stainless steel keys – one lighted with high intensity bulb a....
Check Stock